Workshop supplies

​Extremely lightweight thanks to aluminum housingEquipped with brushless electric motorProtection against overvoltage, overheating and overloadDouble safety thanks to mechanical-electrical brakeSuspension of the chain hoist by means of rotating support hooks General information:Load capacity: 250 kg Lift: 3 mLifting speed(es): 3 m/min Cable length of control unit: 6 m

​Extremely lightweight thanks to aluminum housingEquipped with brushless electric motorProtection against overvoltage, overheating and overloadDouble safety thanks to mechanical-electrical brakeSuspension of the chain hoist by means of rotating support hooks General information:Load capacity: 500 kg Lift: 3 mLifting speed(es): 4 m/min Cable length of control unit: 6 m

 The Rottner Gun 5 Cargo is a simple gun and ammunition cabinet in which you can store up to 5 long guns. The cabinet is made of high-quality sheet steel and has two lockable compartments, one for the weapons and one for ammunition or accessories. Each compartment has a cylinder lock incl. 2 keys. Please use the included assembly material for professional assembly. Security class:Not certified as burglar-proof - can only be used as an ammunition cabinet in Germany!Lock:2 cylinder locks with 2 keys eachSecurity features:Single-walled gun cabinet made of high-quality sheet steel2 separate compartments for 5 long guns and ammunitionMax. weapon height 1245 mmCleaning rod holder on the inside of the door, weapon holdersFire rebate in door openingInternal hinges - 90° door opening angleExternal depth +15 mm due to attached fittingInstallation:Simple attachment to the floor or wall is possible2 holes drilled through the floor and 2 holes drilled through the rear wall, Ø 11 mmMounting material is supplied FREE OF CHARGECLASSIFICATIONInsurance value private AT: After consultation with the insurance companyInsured value commercial AT: After consultation with the insurance companySecurity level Detail: no security levelNUMBER OF WEAPONSSpace for long guns: 5Space for handguns: 0DIMENSIONSWeight in kg: 17Internal dimensions in mm (HxWxD): 1245 x 365 x 240External dimensions in mm (HxWxD): 1500 x 370 x 265Volume in liters: 109External dimension extension through fitting: 15mmDoor clearance height: 1170Door clearance width: 290LOCKLock type: Cylinder lock with 2 keysEQUIPMENTInterior safe as standard: yesAdjustable shelf: noDoor opening angle: max. 90° opening angleNumber of drawers: 0DRILLINGSNumber of rear panel holes: 2Rear panel hole diameter: 11Number of bottom holes: 2Base hole diameter: 11Rear panel hole: Yes, drilled throughBottom hole: Yes, drilled through 

​Safe and easy lifting of the load thanks to two-part pump lever with rubber handleExtra wide surface of the support plateValve control via rotating pump leverFewer pumping operations required up to the maximum end height thanks to double pistonTechnical dataLoad capacity: 3 t Stroke: 340 mmEnd height: 460 mm Underride height: min. 120 mmDimensions and weight:Length approx.: 628 mm Width/depth approx.: 343 mmHeight approx.: 158 mm Weight approx. 31.5 kgMax. length approx.: 1756 mm

Robust chain hoist with a maximum load capacity of 1.5 T. Lifting height 1500mm. Secure hold thanks to the load pressure brake and rotating safety load hooks. ~The chain can be pulled through quickly thanks to the chain freewheel circuit. Weight: only 10.8 kg.

​For extracting engine, transmission and other lubricating oils, also suitable for other liquids with low viscosity, such as water and antifreezeCan be used in the car, motorcycle, shipbuilding and industrial sectorsCan be operated manually using a hand pump, making it independent of compressed airTransparent container for checking the fluid levelCapacity: 5.5 lWeight: 2.48 kgDimensions: approx. 220 x 220 x 600 mmScope of deliverySuction unitSuction pipe, Ø 10 mm, length 400 mmSuction pipe, Ø 6 mm, length 750 mm

Hand winch for horizontal pulling of loads.Can be used in a variety of areas without electricity, such as in the garage, in the garden, on trailers or in forestry and agriculture.Equipment:20 m steel cableLoad hook with teardrop openingIntegrated brakeHand crank with soft gripBase plate with holes for permanent mounting on suitable Support points. ~Technical data: ~Max. Tensile force without pulley: 720 kgMounting plate LxW: 140 x 86 mmLength: 360 mmWidth: 270 mmHeight: 160 mm

Very comfortable with ergonomically padded headrestHandle and six oil-resistant swivel castorsPractical side storage areas ~Static support load max. 120kg Dimensions (lying position): (L x W x H) 1010 x 475 x 130mm Weight (net): approx. 4.8kg

Pulley with hook for electric wire rope hoists, with hook and pulley. 

​The 1.5 t wheel trolley from Mammuth is a versatile tool for safely lifting and maneuvering large wheels for construction and agricultural machinery, etc.With a load capacity of 1500 kg, it can transport large wheels.The integrated safety bar is fully height-adjustable and enables safe and stable positioning during transportation and provides additional control for safe handling.Its freight-friendly assembly concept provides a cost-efficient solution for transportation and storage, as it can be easily assembled on site.Equipped with eight high-quality steel ball bearing castors, the dolly ensures smooth, seamless movement under heavy loads, reducing effort and increasing efficiency.With its 4 swivel wheels, two of which are braked, the dolly offers excellent maneuverability and control, allowing for easy steering and stable, secure positioning when required.Technical data:Lifting capacity: 1500 kgLifting height range: 0 - 750 mmWheel diameter range: 1000 - 2000 mmMax. width of castors: 810 mmMaterial: steel

The ~2-door hinged door cabinet ~GWS from Gde is the ideal storage space for your workshop. ~With its dimensions of 85 x 40 x 185 cm WXTxH, it offers plenty of space for tools, materials and accessories. ~Delivered unassembled. Perfect in combination with the workbenches and perforated walls of the Gde Eco Line. ~2 doors with central locking4 shelves, high-quality galvanized (height adjustable in 35 mm increments) quick assembly2-way lockingMax. Load capacity of the shelves: 30 kg eachPowder-coated sheet steelDelivered unassembledThe advantages of the GWS tool cabinet:Safe storage space for Your toolsOrder and overview in the workshopLots of space for all your toolsRobust and durableEasy to assemble ~

​for cleaning carburetor parts, jewelry, watch straps, coins, collector's itemsEffectively removes dirtHousing, container and lid made of stainless steel (rustproof)Container size: 154 x 88 x 65 mmUltrasonic power: 35 wattsTime setting: 0 - 30 min (18 time steps)Ultrasonic frequency: 42 kHzTechnical dataLength: 128 mmWidth: 110 mmHeight: 180 mmGross weight: 1293 gMains frequency: 50 - 60 HzMains voltage (AC): 220 - 240 VCapacity: 0.7 l

​This 2-door wall cabinet with practical integrated perforated panel 2 height-adjustable shelvesPerfect in combination with matching workbenchStandardized perforation: square, 9 x 9 mm, hole spacing 38 mmPowder-coated sheet steelSupplied unassembledTechnical data:ShelfNumber of shelves: 2 pcs.Load capacity of the shelf: 8 kgHole matrix: 9 x 9 mmPunching: 38 x 38 mmNumber of doors: 2 pcs.Depth: 200 mmWidth: 1,709 mmHeight: 600 mm

​Universal hooks for garages, cabins, storage rooms, cellars etc.Suitable as ladder hooks, equipment hangers, bicycles or for garden furnituretube ends sealed with plastic end caps, partially immersion-insulated to protect sensitive material,made of sturdy tube (12 x 12 mm).Secure and simple attachment for wall mounting with 2 pre-drilled screw holes each,incl. fixing material. Max. Load capacity: 40 kg when using the enclosed fixing material in concreteMaterial: steel Surface treatment: galvanizedScope of delivery:4 wall and ceiling hooks, 120 x 80 mm, max. load 40 kg8 screws PZ2, 40 mm8 dowels, 6 x 30 mm

Practical tool for the easy and safe assembly of larger and heavier wheels. ~The tire mounting device allows you to easily lift and turn the wheel to be mounted. ~Also makes it easier to transport the tire to the vehicle.  ~For bikes up to max. 70 kg. Roll spacing approx. 50 cm.Instructions: Disassembly: ~Simply slide the assembly aid under the wheel to be changed, lift it slightly and roll it back.  ~For assembly, push it towards the wheel bolts in the reverse order.To center the wheel bolts, simply turn the wheel on the two rollers and you can easily center the wheel bolts and holes

Deine Werkbank, die durch ihre stabile Konstruktion, eine einfache Montage und diverse Ausführungen besticht.Die höhenverstellbare Füße bieten eine einfache Möglichkeit zur Feinjustierung.Die besonders robuste Arbeitsplatte ist aus Gummibaum-Holz gefertigt und somit 50% härter als beispielsweise eine Eichenholz-Platte.Nicht missen möchte man außerdem den Vollauszug der Schubladen, welche je mit bis zu 30 kg belastbar sind und auf kugelgelagerten Führungsschienen laufen.Die maximale Belastung der Werkbänke beträgt 300 kg, des Weiteren sind die verbauten Türen abschließbar und werden inklusive Ersatzschlüssel geliefert.Arbeitsplatte aus Gummibaum, stäbchenverleimt, sehr hart (ca. 50% härter als Eiche), unempfindlich gegenüber Feuchtigkeit, pflegeleichtTisch bis max. 300 kg belastbarSchubladen bis max. 30 kg belastbarSchubladen mit Vollauszug, kugelgelagertArbeitshöhe: 850-885 mm durch Nivellierfüßeabschließbare Türen (inkl. Ersatzschlüssel)Lieferung erfolgt unmontiert, mit zweigeteilter ArbeitsplatteTechnische Daten:Breite Arbeitsplatte: 1709 mmTiefe Arbeitsplatte: 600 mmStärke Arbeitsplatte: 30 mmArbeitshöhe: 850-885 mmSchublade:Tragfähigkeit der Schublade: 30 kgSchublade klein:Anzahl Schubladen: 6 Stk.Breite der Schublade: 440 mmHöhe der Schublade: 115 mmTiefe der Schublade: 400 mmTragfähigkeit der Schublade: 25 kgAnzahl der Türen: 2 Stk.Türe BxH: 465 x 390 mmMaterial: GummibaumholzTiefe: 600 mmBreite: 1.709 mmHöhe: 850 mm

​The 6-piece equipment set from Güde is the perfect solution for furnishing your workshop. Whether as initial equipment for your hobby workshop or to supplement existing equipment - a large hinged door cabinet, a wall cabinet and two different workshop trolleys offer plenty of storage space for your equipment. All pieces of furniture are lockable, which means that machines and tools can not only be stored neatly, but also safely. Of course, we have also thought about the clear organization of those tools that must always be ready to hand. The large perforated rear panel with standardized perforations is ideal for this. In this respect, the 28-piece Güde tool holder range is the perfect addition. The worktop of the workbench is made of rubberwood, which is characterized by its extreme hardness and the associated robustness, insensitivity and the resulting longevity. Technical data:CabinetNumber of shelves: 3 pcs.Shelf load capacity: 30 kgDepth: 450 mmWidth: 760 mmHeight: 2050 mmNet weight: 40.2 kgWall cabinetNumber of shelves: 1 pc.Shelf load capacity: 5 kgHole matrix: 10 x 10 mmPunching: 38 x 38 mmDepth: 200 mmWidth: 1600 mmHeight: 600 mmNet weight: 15.5 kgPerforated panelHole matrix: 10 x 10 mmPunching: 38 x 38 mmDepth: 12 mmWidth: 1600 mmHeight: 600 mmNet weight: 4.4 kgWorkbenchWorktop width: 1600 mmDepth of worktop: 500 mmWorktop thickness: 25 mmWork

Hydraulic lifting platform with a load capacity of 4.0 tons and a lifting height (including extension) of up to 2050 mm. The platform features automatic unlocking of the safety flaps during lowering. Manual unlocking is therefore not necessary. A solid compensating wire rope ensures optimum synchronization and additional safety. The support arms are 2 and 3-stage telescopic and have height-adjustable and rubberized support points. Technical data: Motor 2.2 kW 230 volts Note: Due to the starting current, a slow-blow fuse may be required. Dead weight 630 kg, total height: 2884 mm, total stand width: 3385 mm, delivery includes steel bolt anchors and support point extension in cardboard box/wooden crate for self-assembly. Very robust platform for the demanding DIY enthusiast or semi-professional.

Hydraulic lifting platform with a load capacity of 4.0 tons and a lifting height (including extension) of up to 2050 mm. The platform features automatic unlocking of the safety flaps during lowering. Manual unlocking is therefore not necessary. A solid compensating wire rope ensures optimum synchronization and additional safety. The support arms are 2 and 3-stage telescopic and have height-adjustable and rubberized support points. Technical data: Motor 2.2 kW 400 volts, net weight 630 kg, total height: 2884 mm, total stand width: 3385 mm, delivery includes steel bolt anchors and support point extension in cardboard/wooden box for self-assembly. Very robust platform for the demanding DIY enthusiast or semi-professional.

​Practical jack with a 2.5-ton lifting capacity.Highly stable thanks to its hybrid aluminum/steel construction, yet relatively lightweight at 27 kg.Quick-lift system with a dual hydraulic pump, operated via a foot pedal, for easy use.Includes an additional height adapter as standard, allowing for lifting heights up to 541 mm.Height without adapter: 85–465 mm.

8 mm,3 meters usable length with 4 shortenings, with ring and load hook, with test sticker, load capacity: at 45 - 4250 kg, at 60 - 3000 kg.

Ideal for a quick car check and car presentation. max. load 2000kg per pair, max. tire width 210mm, height 260mm, length 840mmTV/GS tested

Add-on shelving with 4 shelves to expand the industrial shelving system. HxWxD: 2000x1000x400mm

100x400 mm, 1 pack=2 pieces.