Charging & jump starters

​The V 421 C battery charger from Güde is suitable for starting motor vehicles as well as charging and fast charging 12 V and 24 V vehicle batteries with capacities from 20 to 800 Ah. Equipped as standard with a reliable and interference-free analog ampere display, 2 m long charging cable, reverse polarity and thermal protection as well as fully insulated battery terminals. The scope of delivery also includes 10 additional fuses (50 A). Weighing just under 16 kg, the device is also easy to maneuver thanks to its large wheels, making it the perfect companion in the vehicle workshop. for charging, fast charging and starting vehiclesSuitable for 12 V and 24 V batteriesinterference-free analog ampere displaywith 10 additional fuses (50 A)thermal and reverse polarity protection2 m long connection cableFully insulated battery terminalsEasy to transport thanks to 2 castorsBattery types: PB, WET, PB - lead-acid battery (also MF), WET - wet battery Technical dataMains voltage: 230 VFrequency: 50 HzOutput voltage: 12 / 24 VFuse protection, slow-blow: 16 AMains power: 8000 WCharging current rms: 60 ABattery capacity: 20 - 800 AhNumber of fuses: 10 pcs.Fuse: 2x 50 AJump-start device 1.5 V: 240 AJump-start device 0 V: 390 ABattery start without pre-charging: 35 - 50 AhBattery start with pre-charging: 65 - 100 AhLength: 330 mmWidth: 250 mmHeight: 600 mm

​Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

​Innovative jump starter with up to 2,000 watts peak current.Ideal for starting gasoline (up to 8.0L) and diesel engines.Thanks to its very compact design and power supply via an 18V battery (not included), the device can be used anywhere, anytime. The integrated work light ensures safe operation even in the dark.Up to 50 jump starts can be performed with a 5.0 Ah battery.

​Intelligent battery charger with microprocessor control through multi-stage charging cycle, microprocessor controlled and monitored, optimal for seasonal vehicles with long standing times (convertible/bike).Charging and external starting in one device, the voltage (12V or 24V) to match the vehicle battery is selectable. It is an all-round battery charger for various types of batteries, gel, AGM, maintenance-free and low-maintenance lead-acid batteries.The trickle charge function guarantees a permanent ideal charge condition, regular use extends battery life.Led battery voltage and charge progress indicator.Electronic overcharge, short circuit and reverse polarity protectionFully insulated battery terminalsErgonomic handle for optimal transport

Microprocessor-controlled charger with 2 - 10A output. Suitable for practically all 12V batteries from 3-200 Ah including gel, AGM and maintenance-free lead-acid. Batteries. With trickle charge function &~ LCD display in a compact design.

2in1 all-round charging and starting device for GEL, AGM &~ maintenance-free and low-power lead-acid batteries. With intelligent microprocess control and multi-stage charging cycle, as well as trickle charging function &~ LED battery voltage and charging progress display. Ideal for use in seasonal vehicles, with fully insulated battery terminals and ergonomic handle for optimal transport. Mains connection 230V, charging voltage 12V. With jump starter 100A - 5 seconds charging current 2.7-15A.

Intelligent all-round battery charger with microprocess control and multi-stage charging cycle, suitable for gel, AGM, maintenance-free and low-power lead-acid batteries. Also ideal for seasonal vehicles, with winter charging mode for outside temperatures below 5C, including fully insulated battery terminals, hanging loop and LED voltage and charging progress display. Mains connection 230V, charging voltage 12V, charging current 1-2A.

Microprocess-controlled, intelligent charger with multi-stage charging cycle, for GEL, AGM, maintenance-free and low-power lead-acid batteries. With trickle charge function for a permanent, ideal charge level. Ideal for seasonal vehicles, with winter charging mode and reconditioning mode for charging deeply discharged batteries, as well as power supply mode for use as a power supply. Includes LCD display with voltage and charging progress display, as well as electronic overcharging, short circuit and reverse polarity protection. Mains connection 220-240V, charging voltage 12V, charging current 1-4A. With hanging loop for attaching and fully insulated clamps.

The Einhell battery charger CE-BC 1 M is an intelligent all-round battery charger with microprocessor control for a wide range of battery types.For gel, AGM, maintenance-free and low-maintenance lead-acid batteries< /li>Push button to choose between 6/12V vehiclesProtection class IP65: Dust-tight and protected against jets of waterFloat charging function for a permanent, ideal charging state Ideal for seasonal vehicles with long idle times (convertibles/motorcycles)Increase in battery life through chargingElectronic overcharging, short circuit and reverse polarity protectionFully insulated battery terminalsTechnical data:Mains connection: 220-240V / 50 HzCharging voltage: 6 V / 12 V Length: 151 mmWeight: 0.21 kg

​Sophisticated microprocessor-controlled charger for lead-acid batteries from 1.2 - 110 Ah. The charger has a mode for reconditioning deeply discharged batteries and an efficient maintenance mode with automatic desulphurization program. Technical data: Charging capacity max. 5.0 Amp Battery capacity: 1.2 - 160 Ah Battery types: 12V, WET, MF, Ca7CA, AGM, EFB, GEL Protection class: IP65 = suitable for outdoor use.

​Fully automatic charger with 10.0 amp charging capacity. Ideal for 12Volt batteries from 20 - 200 Ah or 300 Ah trickle charge. This charger has a recond mode for reconditioning deeply discharged batteries and an AGM option for maximizing the service life of common start/stop batteries. Technical data: Charging capacity max. 10.0 Amp Battery sizes: 20 - 200/300 Ah Battery types: WET, MF, Ca/CA, AGM, GEL Protection class: IP65 = suitable for outdoor use.

​Compact charger with fully automatic 6-stage control. Ideal for gentle charging of smaller batteries for motorcycles, quads, lawn tractors, emergency generators, etc. Thanks to the electronic control, also suitable for trickle charging (car) batteries up to 100 amps. Technical data: Voltage 12V Charging for batteries from 1.2 - 32 Ah Trickle charging up to 100 Ah Protection class IP65 - suitable for outdoor use. Battery types: WET, MF, AGM, GEL

​Compact electronic charger with 10-stage charging process for optimal charging of 6V or 12V batteries from 4-120Ah. Ideal for seasonal vehicles such as motorcycles, lawn tractors, and similar vehicles thanks to its trickle charge function. Rescue function for deeply discharged batteries, for all common batteries such as PB, GEL, AGM, WET, and LiFePO4.Technical data: Power consumption: 70W/230V, dimensions: 220x60x60mm, weight: 0.5kg.

​The Digital GDB 24V/12V-200 battery charger from Güde is suitable for all standard 12 V and 24 V batteries and is safe and simple to operate thanks to its intelligent charging technology. The microprocessor-controlled inverter technology protects the sensitive electronics of your vehicle and therefore allows direct and completely safe charging of batteries that are connected in the vehicle. The particularly battery-friendly 10-stage charging process ensures the longest possible battery life at full power. It includes a fully automatic diagnosis, charging and maintenance function as well as a rescue function, which can be used especially for deeply discharged batteries (from 1.5 V). The jump-start function (up to 250 A) is also very useful in some unpleasant situations. The device also has a number of technical protection mechanisms, such as overcharging, short-circuit, overheating and reverse polarity protection. Once the charging process is complete, i.e. the battery is fully charged, the device also automatically switches to trickle charge mode. This means it can remain permanently connected to maintain the battery's full state of charge. The practical LED display gives you information about the current charging current, the charging voltage and the charging progress. It goes without saying that the battery charger is spark-proof, the battery terminals are fully insulated and the device is easy to maneuver thanks to its two castors, despite weighing just under 17 kg. Inverter technology for efficient energy useProcessor-controlled intelligent charging technologyBattery-friendly 10-stage charging processFor all standard 12 V and 24 V batteriesDirect charging of a battery connected to the vehicle possibleConstant charge retentionOvercharging, short-circuit, overheating and reverse polarity protectionRescue function especially for deeply discharged batteries (from 1.5 V)Fully automatic diagnosis, rescue, charging and maintenance functionSpark-proofJump-start function up to 250 ALED display for charging current, charging voltage and charging progressFully insulated battery terminalsEasy to transport thanks to 2 castorsBattery types: PB, GEL, AGM, WET, PB - lead-acid battery (also MF), GEL - gel battery, AGM - flow battery, WET - wet battery Technical data: Mains voltage: 230 VFrequency: 50 HzOutput voltage: 12 / 24 VFuse protection, slow-blow: 16 AMains power: 8000 WCharging current rms: 10/20/35/50 ABattery capacity: 20-550 AhNumber of fuses: 10 pcs.Fuse: 100 AJump start device 1.5 V: 250 ABattery start without pre-charging: 35-50 AhLength: 304 mmWidth: 295 mmHeight: 674 mm

Inexpensive charger for 12V batteries. Charging voltage 5A. Manual charging current display. Ideal charger for every car.

Electronically controlled charging and starting device for all common starter batteries in the automotive sector. Suitable for gel and AGM batteries. Charging strength adjustable in 2 levels (4A or 12A), switchable for 24V batteries. Also suitable for trickle charging (seasonal vehicles, lawn tractors, etc.) thanks to electronic charging control. BOOST function with 100A as a starting aid. Winter mode ensures optimal charging even at temperatures below 0C. Supplied with 1.5m charging cable and carrying handle.Technical data:Power: 270WCharging voltage: 12/24 VCharging current: 4/8/15/100 ACharging cycles: 6Connection voltage: 230VDimensions (LxWxH): 295x235x195mmWeight: 8.5kgArea of application:Suitable for battery types: AGM, GELArea of application: charging: motorcycle, car, kB, kT, trucks<~7.5t, boatsArea of application starting: Motorcycles, cars, kB, kT, trucks<~7.5t, boats

Automatic charger with 3.5/7 A charging capacity, ideal for batteries from 30 - 120 Ah. The fully automatic charging process also makes it possible to charge wet, AGM and GEL batteries. Furthermore, trickle charging offers the possibility of gently and permanently charging rarely used batteries (boats, vintage cars). With this device, batteries in vintage cars, for example, can be kept in an optimal state of charge for months.

For professional users in repair, body and car electrical workshops ~Ultra-light device with integrated lithium batteryWith memory saver function: In backup charging mode, use as a power supply to maintain the settings of the vehicle electronics when the battery is removed - important function for modern cars in which the battery change can only be carried out in backup charging mode in order to maintain the settings of the electronic devices in the vehicle (radio code, seat and driver comfort settings, ...)Patented microprocessor controlDisplay with error code displayEasy to use thanks to extensive protection functions, e.g. against incorrect polarity or overvoltageNo defect in the internal battery if it is discharged for a long timeFour-cell LiFePO4 battery with high security against independent ignitionFive times longer lifespan than devices with conventional batteries - approx. 3000 cycles0.5 m long starting cable with fully insulated alligator clipsQuality Made in EuropeGeneral informationStarting voltage12VPeak starting current2000AI-Start800AProtection classIP 32Dimensions and weightsCharging cable length0.5mLength (product) approx.260mmWidth/depth (product) approx.135mmHeight (product) approx. 72 mm Weight (net) approx. 2.4 kg Electrical data Connection voltage 230 V Mains frequency 50 Hz Area of application Suitable for battery types WET / GEL / AGM Area of application starting: motorcycles / boats / cars / vehicles / commercial vehicles

Very light, flexible charging starter device, 230 volt mains connection, suitable for 12 and 24 volt WET/PB batteries, effective charging current 30 A, max. 45 A, starting current 450 A - ideal for cars, max. battery capacity 220 Ah, 6 charging levels + Jump starter, with cable storage compartment, weight 18 kg

Fully automatic charging with max. 4.5 A charging current. Microcontroller controlled charger for all common 6 and 12 volt batteries including WET, MF, AMG and GEL batteries up to 120 Ah battery capacity. Trickle charging for winter storage of motorcycles, classic cars, boats, etc. Extended battery life by refreshing (pulse current) in desulphation. Protection class: IP 65 = safe outdoor use. Power consumption: max. 75 W. Complete with pole clamp charging cable and charging cable with eyelets 6.4mm diameter.

Powerful starting and charger for 12 or 24V. 6 charging levels including timer with max. 60 A charging current. Jump starter with max. 620 A including 5 m remote start device. Thanks to solid pole terminals and 25 mm charging start cable, it is ideal for use in commercial, industrial or agricultural environments.

Professional charging and starting device with up to 700 amp starting current. Charging current max. 75 A, 12/24 V charging voltage, 6 charging and 1 starting level. CPS auto-start function increases safety for electronic components and practical one-man operation. Ideal for trucks, construction or agricultural machinery.

High-quality charging and jump starter device with C:P:S Control. ~This version gives you 100% protection against dangerous overvoltage and associated damage to electronic components during the starting process. ~This function also enables Effortless 1-man operation without a remote start device as the device automatically recognizes the starting process.Charging current effective 30 Amp, starting current 500 Amp, switchable from 12 to 24 volts, for batteries up to 260 Ah. Starting cable 2x2.5m 25mm2.Dimensions: 345x250x280mm, weight only 20kg. Ideal for cars with petrol and diesel engines or as a charger for small tractors.