Hand tools

Lubricant especially for conveyor ropes of mountain railways and elevators, ~very good creep and adhesion, preserved, moisture-infiltrating, ~also suitable as vehicle underbody protection and cavity protection. ~Targeted application, no spray mist, optimal corrosion and rust protection, ~moisture-infiltrating, can be painted and sprayed, ~1 liter container with holder for spray gun.

Lubricant especially for conveyor ropes of mountain railways and elevators, ~very good creep and adhesion, preserved, moisture-infiltrating, ~also suitable as vehicle underbody protection and cavity protection. ~ Targeted application, no spray mist, optimal corrosion and rust protection, ~moisture-infiltrating, can be painted and sprayed, ~600 ml spray can - not in the Switzerland available!

Roller 125 mm, load capacity 500 kg, deflection rope pulley with rotating safety hook or eyelet and rope guide bracket. Rope diameter max. 24 mm.

The ropes are suitable for towing, hoisting and lifting loads, but not for use with a free-floating load that can twist during the lifting process! For this application, low-twist or torsion-free ropes must be used. Rope:Tensile load: 900 kgRope length: 12.5 mWeight: 2.9 kgCoating hook: galvanized CR6 free

High-quality reversible ratchet with additional angle screw function. Fine-toothed gear (52 Z) makes it easy to loosen or tighten in tight spaces. The screwing work is done quickly and easily by turning the handle.

Hardened steel parallel vice including turntable100 mm clamping jaws with milled teeth, with anvil,precise spindle guiderotatable

Rubber mallet with ash handle with 2 flat trackslow-reboundtough-hard rubber

rubber mallet with an ash handle and 2 flat tracks.Head length: 139 mmHandle length: 380 mmWeight: 1185 gHardness: 90 Shore AStandard: Din 5128-90

Dissolves stubborn rust with immediate effect, protects against corrosion, makes it grippable, displaces water immediately.

High-quality tow rope with 2 load hooks, breaking load 2500 kg, length 4 m.

Completely galvanized, with automatic braking mechanism, awarded with the official test mark of the professional associations. Easy to operate with little effort thanks to appropriately selected gears. Without rope and hooks.

Practical sanding block measuring 210x105 mm. Easy to attach with terminal strip. Complete set with 12 pieces of matching sanding sheets K60, 80 and 120.

A jack with a small initial and large end height of 90-315 mm, capacity max. 1000 kg.

2-component handles, blades made of stainless steel, scissors in 3 common sizes (135/210/245 mm)

4-piece clamp set with 2 pieces each 400 mm and 600 mm, projection 120 mm.

CV steel, screw extractor with left-hand rotation, the broken screw is drilled, the extractor is inserted and the remaining screw is loosened by turning to the left. M3-M25

Made of chrome vanadium steel, in a transparent plastic box. 5 pieces, M3 - M18

8-piece screw extractor set in a plastic box. M3-45

World first! Practical universal pliers for holding and turning round materials such as screws, nails, etc.The special longitudinal and transverse ribbing ensures a secure hold and good power transmission. ~

Screw remover for hammer operation, for loosening stuck screws. Direction of rotation can be switched to right/left. 1/2"~ Square drive according to DIN 3120 - C 12.5, ISO 1174, with ball lock for socket wrench inserts, 1/2"~ Adapter, attachable with hexagon socket according to DIN 3126 - D 8 (5/16"~) with retaining spring for bits, in a sturdy metal box.Contents:Bit adapter 1/2"~ 4-edge to 5/16"~ Inside hexagon5/16"~ Slotted bit 6 8 mm5/16"~ Phillips PH 2 3

High-quality screwdriver bit in a long design

High-quality industrial design made from the best tool steel

High-quality screwdriver set in industrial quality.Ideal for the workshop - whether in motor vehicles, construction machinery or assembly use.All sockets in a multi-tooth design for a perfect hold, even with slightly worn and stuck screws.Sockets in lengths 55, 100, 140 and 200mm.Contents:Screwdriver bits, drive 1/2", length 55mm Multi-tooth - M5, M6, M8, M9 , M10, M12, M14, M16Screwdriver bits, drive 1/2", length 100 mm ~ ~  ~ Multi-tooth - M5, M6, M8, M9, M10, M12, M14Screwdriver bits, drive 1/2", length 140 mm ~ ~ Multi-tooth - M5, M6, M8, M9, M10, M12, M14Screwdriver bits, drive 1/2", length 200 mm ~ ~  ~ Multi-tooth - M8, M10, M12, M14

​Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.Slot: 3.0 - 4.0 - 5.5 - 6.5PH 1 - PH 2