Large appliance accessories

Proven professional impact wrench, for tough use in the automotive sector, on assembly lines and in agriculture. Handy impact wrench with impact-resistant composite housing, double hammer impact mechanism for rapid torque build-up. Exhaust air is routed via the handle, which prevents brake dust from being stirred up. Holder square ", torque clockwise rotation adjustable in 3 stages, torque counterclockwise rotation 1220 Nm, air requirement 510l/min., working pressure 6.3 bar, weight 3.2 kg, connection 3/8".

Powerful 1/2? impact wrench with a maximum torque of 1112 Nm. ~Despite high performance, it only weighs 1.9 kg. ~Exhaust air via the handle, so no brake dust is stirred up. ~Composite housing for maximum stability and comfortable working. ~Air requirement approx. 190 l/min, working pressure 6.2 bar, tightening torque adjustable in 3 levels.

Handy and lightweight impact wrench, with double hammer impact mechanism up to 560 Nm torque. Air requirement approx. 420 L/min, weight only 2.1 kg, complete set including impact wrench, oiler, extension and 10 impact sockets 9-27 mm.

Removes the most stubborn dirt and incrustations from surfaces contaminated with oils, grease, grease, coal dust, tar stains, bitumen and adhesive residue.

Suitable for "older" Kränzle high-pressure cleaners with M22 thread. Adjustable spray wand.

A lance extension with anti-twist protectionExtension: 500 mmPlug nipple: D 12

For quick and easy checking of the tightness of containers, lines, screw connections, etc.

For all common tire valves. 6mm hose connection

This thick grease spray provides long-lasting lubrication without dripping or running. It is particularly suitable for reducing the friction of metal parts and thereby keeping the connection smooth. 400ml.

Professional magnet holder with magnetism that can be switched on and off, making workpieces easy to set up and easy to clean. Suitable for flat angles and round material. Heavy version with 40 kg holding force. Dimensions 95x110x29 mm.

Practical welding angle magnet with 30/45/60 and 90 angles. Holding force approx. 10 kg, dimensions: 59x51x16mm, 2 pcs. economy pack.

Mandrel cone outside ISO 40 / M16 / B16 for drill chucks with B16.

Foldable support frame with a maximum load capacity of 60 kg. Support roller width approx. 40 cm. Height adjustable from 70 - 110 cm.

Connection 1/4? outside and inside.

Infiltrates rust, biodegradable lubricants, has a water-displacing effect, permanent lubrication through MoS2. Contents: 250 ml.

The Multi Workshop Oil is lubricating, easy to penetrate, displaces water from metal surfaces, infiltrates moisture, and does not gum up or stick together. It offers reliable and lasting rust protection. The oil is the versatile, high quality and affordable liquid tool for almost every purpose. Multi workshop oil keeps everything that could creak, squeak or lock in good condition. Everything works like new, is protected and maintained. ~In use by well-known automobile manufacturers~ ~Tested according to DIN 50 021-SS (salt chamber spray test) ~Cleaning: Cleans dirty, oil-sticky metal parts, removes rust film and removes foreign particles.Lubricating: Keeps moving parts running smoothly. Cares for chains, sprockets, ball bearings, hinges, telescopic cables, etc., prevents mechanical wear ~Protecting: Reliably protects iron, steel and non-ferrous metals from corrosion< li>Protects against corrosion, preserves, cleans, lubricates, serves as a contact spray and rust removerExceptionally high rust protection and best adhesion propertiesFrees stuck mechanicsProven as a cutting oil PTFE and silicone free Shake very well before use Hazard statements: Extremely flammable aerosol. Harmful to aquatic organisms, with long-term effect. Container is under pressure: May burst if heated.Physical and chemical characteristics:Appearance: oily, brownish ~Smell: like petroleum ~Relative density: approx. 0.86 g/cm Lower explosion limit: approx. 1.5% by volume Upper explosion limit: 10.9% by volume Kinematic viscosity: approx. 21 mm/s Temperature range: -30 C to approx. +190C

BALLISTOL multi-purpose grease is characterized by the wide temperature range from -30C to +120C ~ and very good water resistance. This means it offers reliable long-term lubrication, good sealing and problem-free conveyability in central lubrication systems. It is resistant to wet and dusty environments as well as to cold and hot water.BALLISTOL multi-purpose grease reduces friction and wear, has a high pressure absorption capacity, is resistant to aging and flexing, and it also protects against corrosion. Does not contain silicone and does not become resinous.Typical uses:Automotive &~ Motorcycle Sliding and rolling bearings Construction and agriculture Industrial machines

BALLISTOL multi-purpose grease is characterized by the wide temperature range from -30C to +120C ~ and very good water resistance. This means it offers reliable long-term lubrication, good sealing and problem-free conveyability in central lubrication systems. It is resistant to wet and dusty environments as well as to cold and hot water. BALLISTOL multi-purpose grease reduces friction and wear, has a high pressure absorption capacity, is resistant to aging and flexing, and it also protects against corrosion. Does not contain silicone and does not become resinous.Typical uses:Automotive &~ Motorcycle Sliding and rolling bearings Construction and agriculture Industrial machines

Large pack in proven quality

Ideal device for removing rust or coatings on rims, frames, etc. ~Also suitable for knocking off plaster, paint or concrete processing. ~Technical data: ~< /u>Air requirement depends. 170 L/min. ~Stroke rate approx. 3,200. ~Weight: 2.6 kg ~Working pressure: approx. 6 bar ~Equipped with 19 needles 3x180mm (DxL)

As a separating and protective agent in electric and inert gas welding. Prevents weld spatter from sticking to nozzles, workpieces and welding tools.

With wall mounting, can be dosed.

A spray gun with low weight and a long service life, very even spray pattern, removable spray head, convenient spray jet adjustment. Flow pot 0.5 L, screw for material adjustment, complete with Euro connection.