Large appliance accessories

DescriptionClamping devices for fastening foil, fabrics, leather, wall coverings, insulating materialsAlso ideal for interior work, especially for fastening tongue and groove boards, profiles, strips, chipboard, etc.< /li>With rubberized handle, cold-insulating, non-slip and vibration-reducingWith bottom loader magazine and contact protectionIn a practical plastic case Special features: Combination device with adjustable exhaust air outletUsable clamps from 16 - 40 mm type 90Usable nails from 20 - 50 mm type F Technical dataAir requirement: approx. 0.6l / shotWorking pressure: 6bar Weight: 1.6kg suitable clamps: 16-40mm type 90 suitable nails: 15-50mm type F

High-quality stapler in a practical PVC case. The large spine width (13 mm) makes it ideal for attaching foil, fabrics, leather, insulating material, etc. Clip size max. 16 mm.

Compressed gas cleaner dust-free ~ - ~ Observe hazard warningsRemoves dust, the finest lint and small particles from hard-to-reach places without contact. Sensitive objects such as films, optics and highly polished metals are protected. Achieves greater productivity through the use of a special gas. A gas volume that can be sprayed out of approx. 80 liters (comparison compressed air: only 5 liters). Contains ozone-neutral propellant. ~Typical uses:Camera, lens and lensesMicroscopes and other optical devicesComputers, keyboards, Printers, USB ports etc.Hifi/stereo system and record playerElectrical and electronic switching elements and modules (e.g. light switch, socket, circuit board, ...)< li>In laboratories and graphic companies For hobbies and workshops APPLICATION:When using, always hold the can upright and spray. Spray at a distance of 2 - 5 cm from the object. Press the spray head at short intervals. Do not shake before use! Not suitable for camera reflex mirrors. ~Danger and safety instructions:Extreme flammable aerosol. Container is under pressure: may burst if heated. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke. Do not puncture or burn, even after use. Protect from sunlight and do not expose to temperatures exceeding 50C. Send the contents/container for recycling.Colour: colorless, clearSmell: odorlessBoiling range: approx. -48C (propane)Flash point: approx. -104C (Propane) Lower explosion limit: approx. 1.5 vol% (propane)Upper explosion limit: approx. 10.9 vol% (propane)Solubility in water: practically insoluble

Can be used for any compressor.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 365 L/min, speed 1370 rpm, required. Motor power 2.2 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.75 L.

Cast iron compressor with 2 cylinders with aftercooler, suction capacity 556 L/min, speed 1440 rpm, required. Motor power 4.0 kW. Complete with filter and fan wheel 280x13 mm. Oil filling quantity 0.9 L.

Cast iron compressor with 2 cylinders and 2-stage compression, suction capacity 820 L/min, speed 1215 rpm, required. Motor power 5.5 kW. Complete with filter and fan wheel 398x9.5 mm. Oil filling quantity 1.34 L.

Switch-off pressure adjustable from 3 to 11 bar. 4 connections 1/4". With relief valve. For 400 volts

This spray removes oil, dirt, flux and oxidation residues from sensitive electrical or electronic devices. It penetrates even hard-to-reach areas and dries quickly without leaving any residue. 400ml.

Displaces moisture and ensures good contact with switches, relays, lights, etc. Simply spray switch contacts (do not rinse), product evaporates and ensures lasting good contact.

Size MB 15

Original Elmag spare part

Wire nozzle MB25 / MB36, length 28mm, outside 8mm, M6, 1.0mm

weather-resistant, quick-drying and copper-colored coating for many surfaces with corrosion protection, abrasion, scratch and brush resistant for repairing damaged surfaces and as a protective seal for pipes and metal structures made of copper copper flakes in the synthetic resin dispersed in fast-volatile solvents on a grease-free, clean surface Spray on and let dry for approx. 20 minutes dust dry at +20 C in approx. 10 minutes can be used in all areas of maintenance, servicing and repair for artistic forging work  ~Other technical properties  ~Container: spray can

​This assembly paste offers reliable protection at extreme temperatures – from -30 °C to +1,100 °C.It forms a robust lubricating and protective layer that prevents corrosion, seizing, and galling.Ideal for parts subjected to high stress, such as exhaust systems, flanges, combustion chambers, or bolted connections.Thanks to its high compressive strength, it remains adhesive and abrasion-resistant even under heavy loads.It dampens noise and vibration and noticeably facilitates installation and removal.Furthermore, it is resistant to salt water, many acids, and alkalis – perfect for use in harsh environments.Contents: 500 ml

Cylinder spray with lubricating ceramic! Especially for the care and cleaning of cylinders and locks of all kinds. The ceramic particles it contains ensure that the mechanism is optimally lubricated and the mechanism runs smoothly again. Achieves even the tightest fits by spraying. Squeaks and creaks are eliminated. It displaces moisture and thus has a preventive effect against icing. This maintains functionality and extends the service life. Protects against rust and removes existing rust.

​Professional tire inflator with digital display and a measuring accuracy of 0.01 bar, measuring range 0.2 - 10.0 bar,Excellent readability thanks to large digits and illuminated display, robust design with rubber coating and integrated hanging loop,Dustproof and waterproof to IP65.Complete with 500mm hose and quick-release fastener for one-handed attachment and removal, as well as a secure fit on the valve.

Suitable for all HD pistols with a 12 mm plug-in coupling

With stainless steel pipe, 500 mm with nozzle 042.

This accessory is only suitable for the professional Krnzle plug-in system.(Not suitable for Krnzle hobby devices (not suitable for K1050 series or : 042

Simple bleeding at the coupling, no whipping of the hose line, easy coupling. High quality steel construction.

Robust professional demolition hammer for wall breakthroughs and renovation work.For universal use in tiling, chipping, chiseling work, in construction and in the bodywork areaWith ergonomically shaped handle, cold-insulating and low-vibrationLength: 450 mm< br>Gross weight: 6.9 kgAverage air requirement, approx. 600 l/minImpact strength: 28 joules

DL hose set 10m/9mm with EURO connections, 10m cross-fabric hose blue transparent 9x14mm, completely shrunk with fitted fittings.