Electrical appliances, machines, accessories

High-quality, heat-resistant release and lubricant, water, oil and dirt repellent. PTFE spray. Contents 400 ml.

The 2 in 1 telescopic magnetic holder is perfect for cleaning and adjusting windshield washer nozzles.?Load capacity up to 0.5 kg with telescopic function.Practical service toolwith stable , scriber-like adjustment tipwith thin cleaning rodalso suitable for adjusting the headlight washer nozzleswith retaining clip for breast pocketincludes protective caps li>Aluminum Technical data:Material:AluminumPackaging contents:1Head in mm:8.0Load capacity in kg:0.5Functional attribute 1:TelescopicFunctional attribute 2 :with cleaning needle, length mm: 150.0 - 675.0, weight [g]: 25

Telescopic rod MS, suitable for battery-operated wood saw Faie number 122682Ideal for sawing off branches at higher altitudes, ~The total length varies between 120 and 190 cm.

Special cleaner for indoor and outdoor dirt as well as oil, grease and wax depositsPhosphate-freeWith active dirt removersBiodegradable (DIN) ~The patio and stone cleaner from Krnzle in the practical 5 liter packaging - your ideal solution for thorough and gentle cleaning of all stone surfaces. No matter whether it's a terrace, sidewalk, facade or garden path: with this powerful cleaner Effectively blast stone and concrete surfaces without attacking the materials.Efficient and environmentally friendly cleaning, the Krnzle patio and stone cleaner was specially developed to reliably remove dirt, moss, algae and other deposits while protecting the environment protect. Its formula is effective and at the same time gentle on your surfaces and nature.Easy to use for radiant results: Using the Krnzle stone cleaner is very easy. Dilute it according to the instructions for the respective dirt, apply it to the surface to be cleaned, leave it to act briefly and then rinse it off. The result is clean, fresh-looking surfaces without a lot of work.

Hot water high-pressure cleaner Made in Germany. High-quality steam jets with continuously adjustable hot water delivery (12-80C), steam level at 140C (max. 30 bar.). High-quality brass pump unit with 170 bar max. working pressure adjustable from 30-150 bar. Water output: 5-16.7 L/min or 300 - 1,000 L/h, motor: 5.5 KW / 400 volts, 1400 rpm. Heating output: 68 KW, action model with complete equipment including 20M high-pressure hose reel and lance including flat jet nozzle and quick coupling.

Hot water high-pressure cleaner Made in Germany. ~Krnzle axial pump with max. 165 bar, ~Working pressure adjustable from 30 - 150 bar, ~ Water output max. 720 L/h, ~Hot water output 12 - 80C, ~Heating output 58KW, heating oil consumption max. 6.4 l/h. Thanks to the steam level of 140C, the cleaner is also suitable for disinfecting or dissolving grease. ~Complete equipment with hose reel including 15m HD hose and 4 wheel chassis with parking brake for easy transport for mobile use. ~The standard HD lance is equipped with the Krnzle D12 quick-change plug-in system and enables the easy use of optional accessories for every use. ~The included water inlet filter provides the supply of clean water is safe. ~Technical data: ~Working pressure: 30 - 150 bar ~Water output: 720L/h ~Motor power: 3. 8KW 400volt at 1,400 rpm ~Fuel tank: 25l ~Dimensions: 860x580x1220mm ~Weight: 164 kg ~Inexpensive steam jet in proven Krnzle quality for semi-professional use.

Welding rods for aluminum materials such as: AL Mg3/5, AL Mg Mn, G-AI Mg3/5. Protective gas: pure argon.

Easy filling and draining of air with two buttons, including 750 mm rubber hose with car adapterCalibrated designEasy to read WIKA pressure gauge with 63 mm diameterShatterproof plastic housing ~ TECHNICAL DATAGeneral informationDiameter pressure gauge 63mmMeasuring range 0 10barWorking pressure 10barDimensions and WeightsWeight (net) approx. 0.5kg

Calibrated and extremely robust design for use in gas stations or workshops. With double scale pressure gauge ( 80 mm) and lever connector.

Professional tire inflator for commercial use at gas stations, workshops, etc. Calibrated pressure gauge with 0-10 bar measuring range and professional twin plug.

Very precise tire pressure gauge with pressure gauge 0 to 10 bar, 80 mm and extra long hose.

Very precise tire pressure gauge with pressure gauge 0 to 10 bar, 80 mm and extra-long hose.

Professional tire inflator with rocker arm connector. High-quality, precisely readable pressure gauge, also suitable for tire gas. Measuring range 0-10 bar, pressure gauge 63 mm diameter.

Tire inflation set with practical Quick Lock Moment plug nipple with patented mechanism for a secure hold on the valve, as well as quick connection and removal.Incl. 3-piece adapter set: bicycle valve adapter, narrow and wide nozzle for balls, inflatable boats, air mattresses, etc.Technical data:Measuring range: 0-12barWorking pressure: 10barWeight net: 0.35kgManometer : 60mmConnection thread: 1/4"Length of hose: 410mm

For quickly filling and checking tire pressure in all tires with standard filling nipples. With pressure gauge 63mm diameter, 0 to 8.5 bar display and rubber protective cap.

With a comparable inlet pressure, significantly increased blowing effect thanks to the injection principle.

Practical tool for quickly filling larger tires. With the integrated valve screwdriver, the valve can be safely removed and remains in the plug. Easy to screw in after filling. Length approx. 13cm, weight only 96g.

Turns the stone exactly circular and flat. Is guided by the universal support, which also guides the devices. Effortless feeding with double knobs.

With rubber handle and double-sided plug-in valve. Hose connection 6 mm.

According to DIN 345, HSS quality (high-performance high-speed steel)

With offset shaft 13 mm

Profile-ground professional drills in titanium nitrided design. For all work, including higher quality steels. Increasing in 0.5 mm.

High-quality DIN 338 Type N drill bits from Rukko/Terrax with TiN coating for high drilling performance and longer operating times

​HSS metal drill bits with cone holder for use in pillar drills, lathes etc. Contents: one drill bit each: 14.5/16/18/20/22/24/26/28/30 mm. Supplied in metal case.