Electrical appliances, machines, accessories

High-quality paint gun with infinitely variable color and air quantity regulation. Plastic cup (0.75 L) with drip stop, nozzle 1.4mm. Ideal for all painting work.

Cordless drill/screwdriver with BL motor for a long service life and maximum performance.Robust 2-speed planetary gearbox with up to 54Nm torque. Speed 0 - 500 and 0 - 2,000 rpm, 13mm keyless chuck, 21 level torque setting. Impact stage for use in concrete or masonry.Special model with charger, 2x batteries 18V/6.0! Ah and MAKPAC transport case.

Vario-Tacho-Constamatic (VTC) full-wave electronics for working with material-appropriate speeds that remain constant under load Adjusting wheel for pre-selecting the speed Robust die-cast aluminum gear housing for optimal heat dissipation and longevityRotatable carbon brush bridge: Maximum performance even in anti-clockwise rotation for loosening stuck screwsMetabo Marathon motor with patented dust protection for a long service lifeMetabo S -automatic safety clutch: mechanical decoupling of the drive when the insert tool is blocked for safe workingRight-left rotationKeyless drill chuck and spindle stop gear for convenient one-handed tool changeSpindle with Hexagon socket for screwdriver bits for working without a drill chuckOverload protection: protects the motor from overheatingRestart protection: prevents unintentional starting after a power interruptionCable-friendly ball grommet for optimal freedom of movement when WorkCarbon brush wear indicator shows the impending carbon brush change in good time Comparable device characteristics Max. torque: 46 Nm/17 Nm Drilling diameter in concrete : 20 mm Drilling diameter in steel: 16 mm/8 mm Drilling diameter in soft wood: 40 mm/25 mm Idle speed: 0 - 1,000 / 0 - 3,100 /min Rated input power: 1,300 W Output power: 790 W Speed at nominal load: 1,000/3,100 /min Max. impact rate: 58,000 /min Clamping neck diameter: 43 mm Drill spindle thread: 1/2 " - 20 UNF Drill chuck span : 1 - 13 mm Drill spindle with hexagon socket: 1/4" (6.35 mm) Weight without power cable: 3 kg Cable length: 4 mScope of delivery: Keyless drill chuck Futuro Plus, ~ long additional handle, ~ Drilling depth stop, ~ Plastic case

3/4? to 1/2?, extra strong version, original Gedore.

Proven professional impact wrench, for tough use in the automotive sector, on assembly lines and in agriculture. Handy impact wrench with impact-resistant composite housing, double hammer impact mechanism for rapid torque build-up. Exhaust air is routed via the handle, which prevents brake dust from being stirred up. Holder square ", torque clockwise rotation adjustable in 3 stages, torque counterclockwise rotation 1220 Nm, air requirement 510l/min., working pressure 6.3 bar, weight 3.2 kg, connection 3/8".

Powerful 1/2? impact wrench with a maximum torque of 1112 Nm. ~Despite high performance, it only weighs 1.9 kg. ~Exhaust air via the handle, so no brake dust is stirred up. ~Composite housing for maximum stability and comfortable working. ~Air requirement approx. 190 l/min, working pressure 6.2 bar, tightening torque adjustable in 3 levels.

Handy and lightweight impact wrench, with double hammer impact mechanism up to 560 Nm torque. Air requirement approx. 420 L/min, weight only 2.1 kg, complete set including impact wrench, oiler, extension and 10 impact sockets 9-27 mm.

Removes the most stubborn dirt and incrustations from surfaces contaminated with oils, grease, grease, coal dust, tar stains, bitumen and adhesive residue.

for cut-off grinder CS 23-355, especially for inox/stainless steel metals, 350x3x25.4mm

Modern, robust welding inverter for quick and easy welding of all common standard electrodes.Complete incl. 3m welding cable 16mm with electrode holder and 3m ground cable 16mm with ground terminal 200ADevices with PFC (power factor correction), VRD (voltage reduction when idle)TIG DC function = enables easy TIG welding with contact ignitionPrecise setting of the welding parameters via digital displayUniversally usable for welding anything common electrode typesConstant deposition performance is achieved through constant welding currentAll devices are constructed using modern inverter technologyThis allows small and light electrode devices to be manufacturedThis makes it ideal for assembly work (on ladders, on scaffolding, etc.) and, thanks to protection class IP 23, generally also for outdoor work. At least 30% ED for all devices. < li>Thanks to the quietly running built-in fans, the heat is dissipated well from the devices and thus a long duty cycle is achievedHot Start: By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-Stick If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from burning outArc force control: Internal monitoring of the welding current and welding voltage prevents short circuits quickly and safely dissolved This stabilizes the arc and the electrode can be processed without any problems Technical data: Length: 365mm li>Width / depth: 150mmHeight: 28mmWeight: 6.1kgConnection voltage: 160-275VType of power: ACMains frequency: 50/60HzPower consumption: MMA 22 / TIG15Total output: 5/3.5kVA Standard: IEC 60974-1:2012Protection level: IP23Insulation class: HEMC class: AMarking: CE< /li>Required generator power: >~5kVAPower plug: 16AOpen circuit voltage: 14.5VWeldable electrodes: 1.6-4, 0mmAdjustable electrode: 10-160ADuty cycle at max. current 40C electrode: 30%Current at ED 100% 40C electrode: 90A Power consumption electrode: 5kVA Sheet thicknesses: 1.0mm - 7.0mm

Modern, powerful compact welding inverter Suitable for use on generators, e.g. in company workshops, schools, metal construction, on construction sites or for farmers Protection against moisture, salt spray, corrosion thanks to a sealed circuit board also suitable offshoreDevices equipped with PFC (power factor correction), VRD (voltage reduction when idle)TIG DC function = enables simple TIG welding with contact ignitionPrecise adjustment of the Welding parameters via digital displayCan be used universally for welding all common types of electrodesConstant deposition performance is achieved through constant welding currentAll devices are constructed using modern inverter technology< /li>This allows small and light electrode devices to be manufacturedThis makes them ideal for assembly work (on ladders, on scaffolding, etc.) and, thanks to protection class IP 23, also generally for outdoor workAt least 30% ED for all devices Thanks to the quietly running built-in fans, the heat is dissipated well from the devices and thus a long duty cycle is achieved All CRAFT STICKs have the following functions as standard:Hot Start: By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-Stick If the electrode accidentally sticks, the welding current is automatically reduced and thus prevents the electrode from burning outArc force control: Through the internal monitoring of the welding current and welding voltage, short circuits are resolved quickly and safelyThis stabilizes the arc and the electrode can can be easily processed Technical data: Length: 365mm Width/depth: 150mm Height: 28mm li>Weight (net): 6.1kgConnection voltage: 160-275VPower type: ACMains frequency: 50/60HzPower consumption: MMA 31 / TIG 22Total power: 7 / 4.8kVAStandard: IEC 60974-1:2012Protection class: IP23Insulation class: HEMC class: AMarking: CERequired generator power: >~7.0kVa Power plug: 16AOpen circuit voltage: 14.5VWorking temperature: -10 - 40 degreesWeldable electrodes: 1.6-4.0mmSetting range electrode / TIG: 10-200ADuty cycle at max. current 40 TIG DC: 30%Duty cycle at max. current 40 electrode: 30%< /li>Current at ED 100% 40C TIG DC: 110ACurrent at ED 100% 40C electrode: 110APower consumption TIG DC: 4.8kVA Power consumption electrode: 7kVA Sheet thicknesses: 1.0 - 8.0mm Scope of delivery &~ Equipment 3m welding cable 16mm with electrode holder 3m ground cable 16mm with ground terminal 200 A

The welding power electrode inverter EASY-STICK 141 is a reliable device that is based on modern inverter technology and was specially developed for 230 volt applications. With its versatile functions, it is ideal for use in workshops, schools, metal construction, construction sites or for farmers. Its robust construction and the ability to work on the generator make it a reliable companion for various welding applications.Hot Start: By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-Stick: If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from burning outArc force control: Internal monitoring of the welding current and welding voltage resolves short circuits quickly and safely. This stabilizes the arc and the electrode can be processed without any problems Technical data:weldable electrodes 1.6 - 3.2mm< /li>Setting range 10-140AMains voltage 160-275VNo-load voltage 76VPower consumption electrode 4.9kVAmax . Current consumption 35AElectrode duty cycle at A max 15%Electrode welding current ED 100% 55AProtection class IP23Insulation class HWorking temperature -10 - 40CLength x width x height 320x135x255mmWeight 3.6kgRequired generator power >~8kVA< /li>Standard EN 60974-1:2006-07/EN 60974-10:2008-10Total output 8 kVASheet thicknesses 1.0 - 4.0mm< br>

For demanding private users and semi-professionalsInverter technology for constant performanceReliable power generator for home and garden, camping, caravans, boats, computers and other sensitive electronic devicesIn Eco mode, the generator regulates the speed depending on power consumption: this reduces fuel consumption and noise emissionsChoke for problem-free cold startsIndicator lights for output voltage, overload and lack of oil Overload protection through thermal protection switch Low oil shutdown with warning lamp Technical data: Length x width x height: 448x236x392mmWeight: 12.1kgType: InverterTime-limited output power (active power): 1.1kWContinuous output power (active power): 1.0kWRated voltage: 230VGenerator protection class: IP 23MStarting system: manual startFuel: petrolTank capacity: 3.0lRunning time at 50% load: 6.6hRunning time at 100% load: 4.4hSound pressure: 70 dB(A)< /li>

Powerful 720W with electronic starting current limitation and constant electronics, with 4-stage pendulum stroke adjustment to optimize the cutting speed. The saw blade can be changed without tools, the base plate can be swiveled by 45 on both sides.For low-dust work, an external suction system can be connected, the guide handle is non-slip with an inserted rubber pad. Delivered in a MAKPAC case with Allen key, anti-splinter protection, extraction nozzle and case insert.Technical data: Power consumption: 720WNo-load speed: 800-2800/min Lifting height: 26mmPendulum stroke: 4 stagesCutting capacity (wood): 135mmCutting capacity (steel/aluminium): 10mm< li>Weight: 2.5kg

Extensive range for all common jigsaws.

Cutting range of 5-65mm, 70mm toothed length. cam shaft. Suitable for: Makita, Bosch, Festool, B&D, DeWalt, ELU, AEG, Millwaukee, Metabo

Cutting range of 3-30mm, 74mm toothed length. Professional series, cam shaft.Suitable for: Metabo, AEG, Atlas Copco, Black&~Decker, Bosch, DeWalt, ELU, Festo, Hitachi...

​All curved jigsaw blades have a narrow blade body for more flexible cuts.The blades have teeth on both sides.This enables easy and precise sawing of tight curves.For best results, switch off the pendulum action on the machine.Suitable for wood Length: 75 x 4/1.2 mm SPECIAL 5 piece pack

Bow handle with non-slip soft grip surfaceMetabo Quick for tool-free saw blade changesVario (V) electronics for working with stroke rates appropriate to the materialExtraction option by connecting an all-purpose vacuum cleanerChip blowing function for a clear view of the interfaceNominal input power 450W, output power 230W, material thickness wood 65mm, non-ferrous metals 18mm, sheet steel 6mm, swivel range -45/+45, pendulum stroke levels 4, number of strokes at idle 600-3000/min., saw blade stroke 18mm, weight 2.5 kg, cable length 2 .5mScope of delivery: Jigsaw blade for wood, jigsaw blade for metal, hex key, plastic case

self-tightening, for quick clamping and loosening of drilling tools with clamping force lock for impact drills with high natural frequency for clockwise and anti-clockwise rotation.

The Airprofi 850/200 is a powerful commercial compressor, ideal for industry and trade.With an industrial unit made of gray cast iron, 2-stage compression and a suction capacity of 850 L/min, it offers high efficiency and long durability . ~It is particularly suitable for short-term high air requirements and heavy compressed air equipment. The 5.5 kW industrial motor and the 200 liter galvanized boiler enable demanding applications.The built-in Condor pressure switch offers precise pressure control and automatic on/off function. ~A complete maintenance unit filters, drains and lubricates the compressed air for optimal performance Quality and longer tool life.The Airprofi 850/200 is a reliable commercial compressor that efficiently meets the requirements of industry and trade.Technical data of the Airprofi 850 /200 compressors:Suction power: 850 L/minPressure: 10 barMotor power: 5.5 kW (7.5 HP)Voltage: 400 voltsBoil capacity: 200 liters (galvanized boiler)Pressure switch: Condor pressure switchMaintenance unit: Complete maintenance unit

The Airstar 500/90 compressor is a reliable choice for home and hobby. With a belt drive and 2-cylinder high-performance unit made of gray cast iron, it offers durability and performance.Large fan wheel and cooling air baffle ensure optimal cooling. The electric motor with high torque and motor protection switch ensures safety. The aftercooler with cooling fins lowers the container inlet temperature and reduces moisture. Fully ready for connection and equipped with safety devices, operated with 400 volts, the compressor is versatile. The 90 liter container offers sufficient air supply. Robust design and sturdy belt grille protection ensure safety. The Airstar 500/90 is perfect for workshops, garages and hobby rooms, with enough air volume and pressure for tires, air tools and blowing out surfaces.Summary: ~Compressor for Home and hobby with proven belt drive and 2-cylinder high-performance unit made of gray cast iron2-cylinder high-performance unit made of gray cast iron for a long service lifeLarge fan wheel and a cooling air baffle on the cylinder for optimal cooling of the CompressorQuality electric motor with high tightening torqueElectric motor equipped with motor protection switchAftercooler with cooling fins ensures a low container inlet temperature and thus less moisture in the compressed air.Stable belt grid protection made of metal400 volt model - standard with phase inverter for easy manual reversal of the direction of rotationCompressed air tank equipped with safety valve, tank pressure gauge and condensate drain valveWith all safety featuresCompletely ready for connectionTechnical data:Compressor system: HOSMaximum volume flow: 500l/minFilling capacity approx. 375l/minMaximum pressure: 10barContainer content: 90lCylinder / stages: 2/1Speed: 1300 1/minMotor power: 3kWElectrical connection: 400VMains frequency: 50HzWeight: 75kgDimensions ( lxwxh): 1070 x 475 x 870mm

The Krnzle K 2000 line is perfectly tailored to the different requirements for high-pressure cleaning devices. Naturally designed with the Roto-Mold chassis and, as standard, with a dirt killer and Vario-Jet lance and a practical organization system for efficient handling when working. This makes it ideal for demanding use in agriculture. Slow-running electric motors have the particular advantage that they work particularly gently and can therefore be used longer than fast-rotating motors.The Krnzle 2160 TST high-pressure cleaner from the K 2000 line has been specially developed to meet different requirements to meet high-pressure cleaning devices. The Roto-Mold chassis offers stability and mobility. The slow-speed motor with 1400 rpm works gently and enables a longer service life.The brass pump, made in Germany, enables continuously adjustable working pressure from 30 to 140 bar with a maximum permissible overpressure of 160 bar. ~The 3. 2 kW motor runs at 230V and delivers a water output of 11 L/min for efficient cleaning. With a weight of 39.5 kg, the high-pressure cleaner is stable, the integrated hose reel and 15 meter high-pressure hose make handling easier. The M2000 safety trigger gun ensures safety Work. Dirt killer and Vario-Jet lance offer versatile cleaning options. The Krnzle 2160 TST is ideal for demanding applications in agriculture and other areas. Robust construction, high water output and adjustable working pressure make it an effective cleaning solution.New version with professional plug-in system for lance changes in seconds ~Technical data:High-quality brass pump (Made in Germany)Infinitely adjustable working pressure 30-140 bar max. Permissible overpressure 160 barWater output 11L/min.Motor 3.2kW / 230VSlow speed 1400rpm.Weight 39 .5kgRoto-Mold chassisIntegrated hose reel15 meter high-pressure hose5 meter connection cableSafety - Trigger gun M2000 Dirt killer lance with stainless steel tube Vario-Jet lance with stainless steel tube

For wooden shaft 6x30 mm.