Electrical appliances, machines, accessories

Rubber-coated syringe protects against surface damage With attachment clip Air volume can be adjusted by turning Can be connected directly to quick couplingPractical compact design Air requirement 150l/minWorking pressure 6barWeight 0.03kgAir connection 1/4"Nozzle opening 2mmMax. Inlet pressure 11bar

DL chisel hammer for medium chiseling work and light demolition work. Piston stroke 50 mm, stroke rate 3600 rpm, air consumption approx. 250 L/min, complete incl. 1 flat and 1 pointed chisel and 1 wide flat chisel. The impact energy is 10 joules.

Collet 6 mm suitable for all standard mounted points and milling cutters. Shaft 3 and 6 mm. Idle speed 24000 rpm. Weight only 0.4 kg, complete including 10-piece grinding pencil assortment and case.

Right/left rotation, 1800 rpm, 1/4? female connection, maximum pressure 6 bar, minimum air consumption 250 L/min. New model with quick-release chuck.

Practical grease gun with a capacity of 500 g. Suitable for cartridges or loose grease. Complete with tube, hose and mouthpiece.

With vent valve and filling nipple for grease filling device. Pressure ratio 1:50 - recommended working pressure 6 bar. Capacity 500 cc, for filling with cartridges, loose fat and through filling devices. Complete with nozzle pipe and Hy mouthpiece.

Perfect for restoring cars, motorcycles, boats and tractors, four nozzles included for different applications. Selective processing without dismantling the component is also possible. The inner and outer edge attachments are suitable for door edges, bumpers or sills. Low-dust work thanks to the practical collection bag.Average air requirement: 200-350 l/min.Working pressure: 2.8 - 8.0 barContainer volume: 0. 9 lBlast media grain size: 0.12 - 0.25 mmNozzle diameter: 4.5 mmDimensions: 330x100x250 mmWeight: 0.85 kg

Air consumption approx. 250 L/min., cutting performance in steel approx. 1.6 mm, weight only 0.6 kg, including saw blades.

For professional use ~Hybrid polymer material with fabric insert, extremely flexible even at low temperatures, abrasion-resistant and high resistance to environmental influences, such as. B. UV light, oil, ozone.Operating pressure up to a maximum of 20 bar, significantly lower weight than rubber hoses.Can be used in temperature ranges between -40C and 80C.Equipped with kink protection at both ends and a quick coupling and plug-in nozzle

Robust fabric hose with an inner diameter of 8 mm. Complete with screw coupling and plug nipple. Hose length 10 meters. Maximum pressure 16 bar.

Compressed air rubber hose extremely flexible and light. Antistatic and silicone-free, resistant to oil, gasoline, chemicals, weather and more. Fabric reinforced.Working pressure up to 20bar, blasting pressure 70bar. Temperature range -40C to +100C. Inner diameter 10mm. Incl. steel coupling and nipple.

Extremely flexible fabric compressed air hose, even at low temperaturesParticularly resistant to compressed air containing oil. Inner diameter 6mm, operating pressure max. 15 bar. Complete with nozzle and coupling

High-quality professional DL hose with 10m length and 9.5x15.5mm (3/8"). Completely including quick coupling.Thanks to the hybrid technology - particularly resistant, even against compressed air containing oil, ideal for e.g. Impact wrench.

Inner 8.5 mm, length 10 m, complete with coupling and plug, highly flexible and abrasion-resistant. For tough use.

High-quality polyurethane compressed air hose with fabric insert for professional use in workshops, garages, etc. Hose is equipped with kink protection, swiveling steel bracket for wall or ceiling mounting. Locking and automatic rolling up of the hose by simply pulling.Technical data:Hose inside: 9.5 mmHose outside: 13 mmHose length: 15 mOperating pressure: 15 barConnection thread : 1/4?Connection thread type: external threadDimensions (LxWxH): 320x140x380 mmWeight: 12 kgScope of delivery:Swivel bracket for wall and ceiling mounting< /li>Quality quick coupling Quality plug nipple

​Robust hose reel with automatic rewind and locking mechanism for easy operation.Sturdy steel frame for heavy-duty use. Mounts to the floor, ceiling, or wall using the two large guide rollers.Equipped with a high-quality 30 m PU mesh hose with a 9.5 mm inner diameter and a 20 bar operating pressure.1/4" male thread connection compatible with standard DL couplings (e.g., part no. 7378).Complete with a 1-meter connection cable and quick-connect fitting.

Automatic hose reel with 20 m hose length. Hose inner diameter 9.5mm, maximum pressure 17 bar, connections male thread. Complete with 1.7m connection hose including 1/4?AG nipple. Matching quick coupling for hose 7378 and plug nipple for inlet Faie No. 7372.

PU fabric hose up to max. 15 bar. Price per meter.

With adjustable exhaust air outlet For making boxes, disposable pallets, crates, frames, partitions, racks, formwork and for attaching gypsum fiber boards With rubberized handle, cold-insulating, Non-slip and vibration-reducing With bottom loader magazine and contact protection Special features:For strip-bound nails 55-90 mm with an angle of 34 degrees and a diameter of 2. 87 mm, 3.05 mm and 3.33 mmAir requirement: approx. 4.8l/shotWorking pressure: approx. 6bar Weight: approx. 4.5kg Connection: 1/4"~

Powerful tool for quickly and precisely removing rust from metal, knocking off paint, removing plaster and concrete residue, working on stone, etc. Long service life thanks to the metal design with 12 needles made of special steel. Stroke rate 3800 min, air requirement approx. 170 L/min, weight only 1.2 kg.

Resin-free oil for all Compressed air tools, 1 liter.

With 1 liter container and rigid 300 mm long spray pipe, adjustable spray valve. Now with a large filling opening.

DescriptionClamping devices for fastening foil, fabrics, leather, wall coverings, insulating materialsAlso ideal for interior work, especially for fastening tongue and groove boards, profiles, strips, chipboard, etc.< /li>With rubberized handle, cold-insulating, non-slip and vibration-reducingWith bottom loader magazine and contact protectionIn a practical plastic case Special features: Combination device with adjustable exhaust air outletUsable clamps from 16 - 40 mm type 90Usable nails from 20 - 50 mm type F Technical dataAir requirement: approx. 0.6l / shotWorking pressure: 6bar Weight: 1.6kg suitable clamps: 16-40mm type 90 suitable nails: 15-50mm type F

High-quality stapler in a practical PVC case. The large spine width (13 mm) makes it ideal for attaching foil, fabrics, leather, insulating material, etc. Clip size max. 16 mm.