Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
Washing brush across 240x90mm with fine bristles and tube 500mm long. ~For cleaning vehicles, windows, etc. ~Suitable for every Krnzle with standard plug-in system.< br>
With real horsehair, 400 mm with joint.
Suitable for Krnzle high-pressure cleaners. Rotating washing brush with 500 mm stainless steel extension.With anti-twist protection on the brush head,minimum water quantity 10l/min - max. 20l/min. ~Temperature max . 35 C.Plug system D12 ~Rotating washing brush: 50% horsehair and 50% nylon ~Brush head 180 mm ~Working pressure (bar): max. 20Tube length: 500 mm
Compact container with 30l capacity. Funnel diameter 420mm, tube (adjustable) : 50mm. Minimum height 680mm, maximum height 1650mm. With 4 wheels for easy transport (wheel diameter 60mm)
Practical, mobile collection container with 65L content. Complete with safety valve, pressure gauge and outlet hose for easy emptying with compressed air. Drip tray with 16L capacity and stopcock on a height-adjustable tube for easy and clean work.
Professional waste oil collection container with a filling volume of 65l.With transparent intermediate storage for quantity control.Technical data:Working pressure: 6-8barAir consumption: approx. 150l/min Container capacity: 65lOil cup volume: 16lThe device includes the following suction probes (1 piece each):5mm x length 80cm made of copper, suction line approx. 1.9l/min6mm x length 80cm made of copper, suction line approx. 3.2l/min6mm x length 70cm made of PVC, suction line approx. 4.2l/min8mm x length 70cm made of PVC, suction line approx. 6.2l /min6mm x length 80cm made of PVC, suction line approx. 3.7l/min8mm x length 80cm made of PVC, suction line approx. 5.2l/min
The life insurance for your Krnzle high-pressure cleaner. Reliably filters sand, dirt and other impurities out of the water and guarantees you low wear and trouble-free work. Suitable for all wreaths HD cleaner.
With push button adjustment, best Gedore quality with diving handle protective cover.
Newly developed Wapu pliers with practical push button adjustment. Inductively hardened teeth, chrome vanadium special steel, 2-component handle protection cover, length 250 mm.
Width adjustment via push button.
Pluvonin from Ballistol for universal impregnation!The spray is ideal for anglers, hunters and anyone who is exposed to wind and weather for work or sport. It is breathable, cares for the material and protects against moisture and dirt!Impregnates and cares for:Outdoor clothingTextiles and suedeCamping equipment Rain, ski and sports clothing Sun and umbrellas Sweaters, coats and anoraks Tents, tarpaulins, sails and Awnings Shoes and backpacks and much more
Content: 0.2 l (€26.95 / 1 l)
Your liquid tool with 5 times the effect! ~Best proven in agriculture and forestry, in tools, machines, electrics and electronics, motor vehicles and commercial vehicles.Five products in one:Rust removerLubricantContact sprayCorrosion protection Cleanerwith 2-way SmartSpray spray head, ~400 ml spray ~
Silicone-free release agent protects workpieces, nozzles and tools from weld spatter.
Content: 0.4 l (€11.58 / 1 l)
Compact vise made of high-quality welded steel, with hardened steel jaws and a large anvil.Adjustable guide.Ideal for universal use.
Reliable and proven welder with 250Amp power. High-quality and compact device for universal use. With the welder, sheet metal thicknesses of up to 10mm can be easily welded, with 10 switching levels, current adjustable from 25-250A. The wire is fed via a high-quality 2-roller system, with integrated automatic welding: 2-stroke, 4-stroke, spot and interval welding. Dimensions: 440x750x640mm ~ ~WxDxH, weight approx. 75 kg. ~Complete with ground cable, pressure reducer, wire coil adapter and 3m MB 25 hose package.
Newly developed MIG/MAG welder with up to 315 amps of power.For steels up to 1.2 mm thick.Thanks to modern inverter technology, this machine is suitable for the following welding processes: MIG/MAG, TIG (DC), and electrode welding.Settings are made via a user-friendly LCD display.Reliable wire feed thanks to a 4-roller wire feeder.Ideal machine for universal use in metalworking shops, mechanical engineering, or agriculture.Technical Data:Adjustment range MIG/MAG 30-315 Amp,Electrode 10-250 AmpPower consumption: 15.4 kVA, 400 VoltDimensions: 1100 x 530 x 850 mm (L x W x D x H)Weight: 54 kgDuty cycle at max. power: 40%Supplied with: 35 mm² ground cable, pressure regulator,4 m gas hose and MAG torch SMB 25-4 m
Ideal for square and round pipes, angles or flat steel. Holding force 75Kg, angle 45/90, dimensions: 152x130x35mm.
according to EN 420 EN 388 EN 12477 Version A + B Cat. II Material: cowhide/split leather Cuff made of durable split leather tested for harmful substances good grip properties strong leather very high tear resistance and high puncture resistance GS (tested safety) tested by TV Rheinland Application: metal, steel and heavy industry, foundries, suitable for oxyfuel, MIG/MAG welding Other technical properties Category: II Abrasion resistance: 2 Tear resistance: 4 Puncture resistance: 3 Cut resistance (cutting test): 1 Version: cuff made of split leather Standard: EN 388, EN 12477
according to EN 388 EN 420 EN 12477 Version A + B Cat. II Material: quality cowhide grain/split leather fully lined good grip properties strong leather with high tear resistance and puncture resistance breathable GS (certified safety) tested by TV Rheinland Application: Welding work under extreme mechanical stress Metal processing Automotive and shipyard industries, foundries, suitable for oxyfuel, MIG/MAG, inert gas and TIG welding Other technical properties Category: II Abrasion resistance: 2 Tear resistance: 4 Puncture resistance: 3 Cut resistance (cutting test): 1 Design: fully lined Standard: EN 388, EN 12477
EN 166, EN 169 EN 175 foldable with clear lenses and fold-up DIN 5 lenses lens 50 mm adjustable headband
for welding to front loaders, excavators, traverses, etc.
The universal welding pliers for the maintenance and assembly of all wearing parts for your welder. High quality made from special tool steel.
For workshop and mobile use ~ - ~The welding power TIG inverter Easy TIG 201 AC/DC is a state-of-the-art welding machine that is ideal for workshops and mobile applications. ~With its 230V connection, it is particularly practical for assembly work. The digital display allows precise settings of the welding parameters. This device offers a variety of functions such as TIG DC for easy TIG welding, TIG pulses for reduced heat input and HF high-frequency ignition without touching the workpiece. The quiet cooling ensures a long duty cycle and efficient heat dissipation. At around 9 kg, it is light and mobile. The welding power TIG inverter Easy TIG 201 AC/DC is suitable for workshops, metal construction, construction sites and agriculture. It is a powerful, versatile device for precise and efficient welding in various applications. ~Summary: ~All devices use modern inverter technology.Best suited for assembly work thanks to 230V connection.TIG DC function enables easy TIG weldingPrecise adjustment of the welding parameters via digital displayUniversally usable for welding all common types of electrodesSuitable for use on generators, e.g. in company workshops , schools, metal construction, on construction sites or for farmersTIG pulsing enables welding with reduced heat inputHF high-frequency ignition ignites during TIG welding without touching the workpieceThanks to the quiet running fans, the heat is dissipated well from the devices and thus a long duty cycle is achieved Technical data:Length: approx. 460mmWidth / depth: approx. 150mmHeight: approx. 280mmWeight : approx. 9kgPower type: ACTotal power: 7.0 / 9.5kVAStandard: EN 60974-1:2006-07/EN 60974 -10:2008-10Protection rating: IP23Open circuit voltage: 52VWeldable electrodes: 1.6 - 4.0mm Setting range TIG: 10-170ASetting range electrodes: 10-170ADuty cycle at max. current 40C electrode: 40%Current at ED 100% 40C TIG: 120ACurrent at ED 100% 40C electrode: 110APower consumption TIG: 6.4kVAPower consumption electrode: 8.9kVA Pulse frequency: 0.5 - 200HzIgnition: high frequencyBurner cooling: airPower factor: cosphi 0.6Sheet thicknesses: 1.0 - 8.0mm
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.