Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
This solution contains PTFE, which provides optimal lubrication and leaves a dry, clear film that repels dirt, dust and oil. The solution dries quickly and is also suitable as a mold release agent.Advantages of the product:Withstands temperatures from -20C to +250CEnsures optimal lubrication and protects against wear Does not attract dirt, dust or oil Dries quickly and saves time Recommended forLocks and latchesDoor and window tracksPower tool blades and drillsGears Chains
Content: 0.4 l (€33.90 / 1 l)
High-quality, heat-resistant release and lubricant, water, oil and dirt repellent. PTFE spray. Contents 400 ml.
Content: 0.4 l (€19.90 / 1 l)
Needle-nose pliers with cutting edge, serrated, straight shapeAccording to DIN ISO 5745, flat-round, long jaws, straight gripping surfaces, serrated. For holding, gripping, bending and cutting workInductively hardened precision cutting edges, cutting edge hardness 61 - 63 HRCGEDORE special tempered steel, drop-forged, oil-hardened and temperedJC = chrome-plated, with 2-component handle protection covers .
The 2 in 1 telescopic magnetic holder is perfect for cleaning and adjusting windshield washer nozzles.?Load capacity up to 0.5 kg with telescopic function.Practical service toolwith stable , scriber-like adjustment tipwith thin cleaning rodalso suitable for adjusting the headlight washer nozzleswith retaining clip for breast pocketincludes protective caps li>Aluminum Technical data:Material:AluminumPackaging contents:1Head in mm:8.0Load capacity in kg:0.5Functional attribute 1:TelescopicFunctional attribute 2 :with cleaning needle, length mm: 150.0 - 675.0, weight [g]: 25
Practical tool for replacing lost screws, nails etc. With practical clip. Total length max. 65 cm.
Telescopic ratchet with 12.5 mm (1.2") square drive and switch lever.CV steel with 2-component handle and nut locking function with push-button release. ~Length optionally approx. 455 - 480 - 510 - 540 - 570 - 595 mm, back swing angle 5, 72 teeth.
Telescopic rod MS, suitable for battery-operated wood saw Faie number 122682Ideal for sawing off branches at higher altitudes, ~The total length varies between 120 and 190 cm.
Lashing strap with clamp lock, permissible tensile force 250 daN (strapping), width 25 mm, length 5 m,
For lashing and securing loads in cars, vans or roof boxes. Practical storage bag for the trunk and workshop. TV/GS tested, polypropylene (PP), durable, 25mm width of the straps.Contents: 2 luggage straps 30 cm and 60 cm, 2 straps 2.5 m, 2 ratchet strap sets (2 pieces .) 3 m, 1 warning flag 30x30 cm.
Special cleaner for indoor and outdoor dirt as well as oil, grease and wax depositsPhosphate-freeWith active dirt removersBiodegradable (DIN) ~The patio and stone cleaner from Krnzle in the practical 5 liter packaging - your ideal solution for thorough and gentle cleaning of all stone surfaces. No matter whether it's a terrace, sidewalk, facade or garden path: with this powerful cleaner Effectively blast stone and concrete surfaces without attacking the materials.Efficient and environmentally friendly cleaning, the Krnzle patio and stone cleaner was specially developed to reliably remove dirt, moss, algae and other deposits while protecting the environment protect. Its formula is effective and at the same time gentle on your surfaces and nature.Easy to use for radiant results: Using the Krnzle stone cleaner is very easy. Dilute it according to the instructions for the respective dirt, apply it to the surface to be cleaned, leave it to act briefly and then rinse it off. The result is clean, fresh-looking surfaces without a lot of work.
High-quality 31-piece HSS thread cutting set from Terrax by Ruko from M3-M12 including all the necessary dies, die holders, turning dies and a screwdriver. Packed in a practical sheet steel storage box.
The wheel cross 17, 19, 22 mm and 13/16” HM is a reliable tool for changing tires quickly and safely. Made from high-quality carbide steel, it impresses with its stability and durability. The four wrench widths cover the most common wheel nuts and make the wheel cross versatile - whether for cars, trailers or agricultural vehicles. Thanks to its compact design, it sits comfortably in the hand and offers optimum leverage. Perfect for the workshop, yard or roadside assistance!High-quality special steelCommon wrench sizesIdeal for changing tiresIndispensable in every vehicle
Hot water high-pressure cleaner Made in Germany. High-quality steam jets with continuously adjustable hot water delivery (12-80C), steam level at 140C (max. 30 bar.). High-quality brass pump unit with 170 bar max. working pressure adjustable from 30-150 bar. Water output: 5-16.7 L/min or 300 - 1,000 L/h, motor: 5.5 KW / 400 volts, 1400 rpm. Heating output: 68 KW, action model with complete equipment including 20M high-pressure hose reel and lance including flat jet nozzle and quick coupling.
Hot water high-pressure cleaner Made in Germany. ~Krnzle axial pump with max. 165 bar, ~Working pressure adjustable from 30 - 150 bar, ~ Water output max. 720 L/h, ~Hot water output 12 - 80C, ~Heating output 58KW, heating oil consumption max. 6.4 l/h. Thanks to the steam level of 140C, the cleaner is also suitable for disinfecting or dissolving grease. ~Complete equipment with hose reel including 15m HD hose and 4 wheel chassis with parking brake for easy transport for mobile use. ~The standard HD lance is equipped with the Krnzle D12 quick-change plug-in system and enables the easy use of optional accessories for every use. ~The included water inlet filter provides the supply of clean water is safe. ~Technical data: ~Working pressure: 30 - 150 bar ~Water output: 720L/h ~Motor power: 3. 8KW 400volt at 1,400 rpm ~Fuel tank: 25l ~Dimensions: 860x580x1220mm ~Weight: 164 kg ~Inexpensive steam jet in proven Krnzle quality for semi-professional use.
Handy pipe cutting set with reversible ratchet and cutting heads in sizes. 3/8?, 1/2?, 3/4?, 1? and 5/4?. The switchable ratchet function makes it possible to work in limited space. For quick and easy cutting/repair of pipes up to 5.4? diameter. Delivered in a practical plastic case.
Cutting die set in original Rothenberger industrial quality. With sizes ", ", 1", and 1 ", as well as ratchet lever (small octagonal holder). Version in BSPT R with ratchet lever in a plastic carrying case.
High-quality 44-piece HSS thread cutting set from Terrax by Ruko from M3-M12 including all the necessary dies, die holders, twist drills, turning dies, a screwdriver and a thread template. Packed in a practical sheet steel storage box.
High-quality 54-piece HSS thread cutting set from Terrax by Ruko from M3-M20 including all the necessary dies, die holders, turning dies, a screwdriver and a thread template. Packed in a practical sheet steel storage box.
High-quality thread cutting set especially for fine threads made of tungsten steel.Sizes and pitches: M2 x 0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M6 x 0.75 - M7 x 1.0 - M7 x 0.75 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x 0.75 - M9 x 1.0 - M9 x 1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5 - M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14 x 1.25 - M14 x 1.5 - M14 x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 - M18x1.5
Inexpensive HSS combination cassette from 3-12 mm.Complete with 1 each of M3, 4, 5, 6, 8, 10 and 12 cutting taps, as well as the matching core hole drills.In metal cassette.
Thread cutting cassette in a robust metal cassette. Equipped with a tap set each M3, M4, M5, M6, M8, M10, M12 and a die each in the same sizes. Complete with the necessary holders and a thread gauge.
Welding rods for aluminum materials such as: AL Mg3/5, AL Mg Mn, G-AI Mg3/5. Protective gas: pure argon.
Content: 5 kg (€19.99 / 1 kg)
extra absorbentDimensions: 125 x 200 x 70 mm
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.