Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
World first! Practical universal pliers for holding and turning round materials such as screws, nails, etc.The special longitudinal and transverse ribbing ensures a secure hold and good power transmission. ~
Screw remover for hammer operation, for loosening stuck screws. Direction of rotation can be switched to right/left. 1/2"~ Square drive according to DIN 3120 - C 12.5, ISO 1174, with ball lock for socket wrench inserts, 1/2"~ Adapter, attachable with hexagon socket according to DIN 3126 - D 8 (5/16"~) with retaining spring for bits, in a sturdy metal box.Contents:Bit adapter 1/2"~ 4-edge to 5/16"~ Inside hexagon5/16"~ Slotted bit 6 8 mm5/16"~ Phillips PH 2 3
Attachment point for load securing, 180° swivelling, Load-bearing capacity at 0° and 90° (safety factor: 4)Supplied without screws - just use 10.9!.
High-quality screwdriver bit in a long design
High-quality industrial design made from the best tool steel
High-quality screwdriver set in industrial quality.Ideal for the workshop - whether in motor vehicles, construction machinery or assembly use.All sockets in a multi-tooth design for a perfect hold, even with slightly worn and stuck screws.Sockets in lengths 55, 100, 140 and 200mm.Contents:Screwdriver bits, drive 1/2", length 55mm Multi-tooth - M5, M6, M8, M9 , M10, M12, M14, M16Screwdriver bits, drive 1/2", length 100 mm ~ ~ ~ Multi-tooth - M5, M6, M8, M9, M10, M12, M14Screwdriver bits, drive 1/2", length 140 mm ~ ~ Multi-tooth - M5, M6, M8, M9, M10, M12, M14Screwdriver bits, drive 1/2", length 200 mm ~ ~ ~ Multi-tooth - M8, M10, M12, M14
Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.Slot: 3.0 - 4.0 - 5.5 - 6.5PH 1 - PH 2
Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.Slot: 3.0 - 4.0 - 5.5 - 6.5PZ 1 - PZ 2
For slotted and cross-head screws PZ3-component handle PowerPositive connection for optimal power transmissionIndustrial quality
Set of 6 common screwdrivers made of CV steelPH1 x 80 mm, PH2 x 100 mmFL3.0 x 0.5 x 75 mm, FL4.0 x 0.8 x 100 mm, FL5 .5 x 1.0 x 125 mmVoltage tester 140 mm, FL3.0 x 0.5 x 65 mm, 125-250 V
Compilations that should be in every toolbox. Complete original equipment for fitters and service technicians.Ergonomic design for good work: Rounded two-component handle shape with flexible "FLEX-DOT" nubs for fatigue-free and pain-free work. Good grip when reaching quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical approach.Oil and acid-resistant special rubber handle that does not stick.Finger grooves for more "grip" when turning quickly.Clear size information thanks to laser marking on matt chrome-plated shafts Made of chrome-silicon-manganese-molybdenum alloyed special steel.Machined black tip for maximum precision when holding screws. Reduces tool slipping. Delivered in red or black
Praktische Satzzusammenstellung in umweltfreundlicher Kartonverpackung. Für Innen-TX Schrauben. 3-Komponenten-Griff Power-Grip³ mit Aufhängeloch. Ergonomische Griffform für präzises, ermüdungsfreies Arbeiten. Formschlüssige Verbindung von Griff und Klinge für optimale Kraftübertragung. Antriebsform-Markierung am Griffende. Klinge aus Molybdän-Vanadium-Stahl, vergütet 2163 TX T10 T15 T20 T25 T30
Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.HX 2.5 - HX 3 - HX 4 - HX 5 - HX 6 - HX 8
with ergonomic multi-component Kraftform handles with roll-off protection.Blades made of molybdenum-vanadium steel nicromatt with laser tip tip "bites" into the screw head and prevents it from slipping out of the screw head and protects against expensive slips Most of the required contact pressure is eliminated Captive size guide system at the end of the handle as a time-saving identification aid for the respective type of screwContents:1 screwdriver each for slotted screws, 3.5 x 100 mm, 4.0 x 100 mm, 6.5 x 150 mm1 screwdriver each for screws with Phillips (PH), size. 1/80 mm, 2/100 mm, 3/150 mm1 screwdriver each for screws with Phillips (PZD), size. 1/80 mm, 2/100 mm, 3/150 mm1 screwdriver each for screws with TORX inner profile size. T 10 - T 15 - T 20 - T 25 - T 30** without laser tip Delivered complete with wall holder.
Compilations that should be in every toolbox. Complete original equipment for fitters and service technicians.Ergonomic design for good work: Rounded two-component handle shape with flexible "FLEX-DOT" nubs for fatigue-free and pain-free work. Good grip when reaching quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical approach.Oil and acid-resistant special rubber handle that does not stick.Finger grooves for more "grip" when turning quickly.Clear size information thanks to laser marking on matt chrome-plated shafts Made of chrome-silicon-manganese-molybdenum alloyed special steel.Machined black tip for maximum precision when holding screws. Reduces tool slipping. Delivered in red or black
Professional screwdriver with 2-component handle, up to 1000V, insulated.
Very robust screwdrivers with impact cap and additional hexagon drive for tough use. Practical combination with slot 4,5,5,5,6,5 and 8mm as well as cross PH 1 and 2.
Complete set with high-quality screwdrivers with ergonomic multi-component Kraftform handles with hexagonal roll-off protection. Equipped with practically all common screwdrivers, with innovative Laser Tip tips for even better grip when screwing. Blades made of extremely strong molybdenum - vanadium steel. Delivery sorted in elegant transport packaging including a practical wall bracket.Contents:1 screwdriver each, VDE-insulated for slotted screws 2.5 x 80 mm - 3.5 x 100 mm1 voltage tester 3.0 x 70 mm1 screwdriver for slotted screws, 4.0 x 100 mm1 each Screwdriver for slotted screws with continuous hexagonal blade, impact cap and hexagonal attachment, 5.5 x 100 - 7.0 x 125 mm, with BlackPoint tip and key aid (for screwing, chiseling and prying)1 screwdriver for screws with Phillips head (PH), size. 2 x 100 mm1 screwdriver each for screws with Phillips (PZD), size. 1 x 80 - 2 x 100 mm1 screwdriver each for screws with inner TORX profile, size. T15 - T20 - T25
Screwdriver with 3-component handle and hardened blade. Contents: slot 4, 5.5, 6.5 and 8 mm, cross PH1 and PH2.
High-quality scriber with replaceable HM tip and retaining clip.
High-quality professional design in aggressive tip and helical design.Areas of application: concrete, sand-lime brick, masonry (for all concrete and stone applications)certified by the Wall Drill Testing Association (PGM) according to the requirements of the German Institute for Construction Technology (DIBt).
High-quality hammer drills in the sizes: 5/6/8x110mm and 6/8/10/12x160mm. In a sturdy metal cassette.
Heavy-Duty Flat Chisel 400x25mm, compatible with all machines featuring an SDS Max chuck.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.