Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
For pulling, tensioning, lifting and lashing loads. For unlimited rope lengths, robust steel housing - but low weight, overload protection through shear pins, smooth lifting and lowering of loads possible. Stainless steel grab hook. European quality product!
Roller 125 mm, load capacity 500 kg, deflection rope pulley with rotating safety hook or eyelet and rope guide bracket. Rope diameter max. 24 mm.
High-strength rope sliding hook with safety latch
With hand reel and hook, 5 times more break-proof.
Content: 20 m (€5.00 / 1 m)
The ropes are suitable for towing, hoisting and lifting loads, but not for use with a free-floating load that can twist during the lifting process! For this application, low-twist or torsion-free ropes must be used. Rope:Tensile load: 900 kgRope length: 12.5 mWeight: 2.9 kgCoating hook: galvanized CR6 free
High-quality reversible ratchet with additional angle screw function. Fine-toothed gear (52 Z) makes it easy to loosen or tighten in tight spaces. The screwing work is done quickly and easily by turning the handle.
Hardened steel parallel vice including turntable100 mm clamping jaws with milled teeth, with anvil,precise spindle guiderotatable
Corrugated wire, with a small diameter for use in hard-to-reach places, internal surfaces and grooves. Ideal for cleaning and derusting, shaft 6mm.
For practical storage of screws or other small parts.
For devices with high air consumption. Inner 10 mm, length 10 m, with coupling and plug.
Content: 10 m (€3.99 / 1 m)
Rubber mallet with ash handle with 2 flat trackslow-reboundtough-hard rubber
rubber mallet with an ash handle and 2 flat tracks.Head length: 139 mmHandle length: 380 mmWeight: 1185 gHardness: 90 Shore AStandard: Din 5128-90
safe and long-term corrosion protection, as the rust layer is neutralized and converted into a protective layer particularly effective and safe to use due to the excellent penetration ability into the rust pores easy further processing due to the good spray pattern and perfect film formation safely stops the development of rust when used correctly neutralizes the rust layer forms a perfect primer layer for further processing ideally suited for the maintenance and renovation of industrial structures, systems, machines, vehicles ~Note: ~loose rust, grease, dirt as well Remove layers of paint that have been infiltrated with rust Clean the rust area thoroughly. Shake vigorously before use, then spray on just a covering layer. (Spray distance approx. 25 cm). Can sprays perfectly above +10 C ~Other technical properties ~Colour: colorless
Content: 0.4 l (€35.98 / 1 l)
Dissolves stubborn rust with immediate effect, protects against corrosion, makes it grippable, displaces water immediately.
Content: 0.75 l (€19.93 / 1 l)
High-performance rust remover with corrosion protection extremely penetrating with high capillary action reduces the mechanical force and prevents bolts and screws from tearing absolutely acid-free special formula does not resinify synthetic oil mixture in slowly evaporating solvent allowed to evaporate after spraying onto the surface to be treated with liquid products Use a brush, cloth or dipping method and allow the solvent to evaporate loosens even completely rusted connections can be used as corrosion protection, care oil for tools and precision mechanics.
Content: 0.4 l (€11.90 / 1 l)
Robust hand lever hoist with a maximum load capacity of 250 kg and a lifting height of 1.5 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
Robust hand lever hoist with a maximum load capacity of 250 kg and a lifting height of 3,0 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
Robust hand lever hoist with a maximum load capacity of 500 kg and a lifting height of 1.5 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
Robust hand lever hoist with a maximum load capacity of 500 kg and a lifting height of 3,0 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
For 18 mm square mount, arm length 300 mm, for 5, 10, 16, 20 ton winch.
Can be used with all types of winches.For applications in limited space.Lifting by moving the ratchet up and downFor 16 mm square socket, arm length 250 mm, for 2.5 ton winch.
High-quality tow rope with 2 load hooks, breaking load 2500 kg, length 4 m.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.