Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
The KMAG mower blade grinding device is characterized by the precisely crafted guides. This means you can achieve a perfect parallel grind when grinding and burning the blades is a thing of the past. The grinding device is infinitely adjustable. The precise parallel grinding is achieved because the device can be swiveled and tilted laterally and can be moved vertically and horizontally. The secure clamping of the mower blades using the single-lever system prevents any risk of injury when working with the grinding device. The KMAG mower blade grinding device is suitable for mower blades from the double blade mowers as well as mower blades from finger bars. High-speed grinding machines with the EURO neck 43mm or the original KMAG precision die grinder can be used.
The STIHL MSA 60 C-B cordless chainsaw is perfect for private garden and property maintenance around the house or for craft work.The machine is part of the STIHL AK battery system. Stihl recommends the STIHL AK 20 lithium-ion battery and the STIHL AL 101 standard charger for the MSA 60 C-B.The Stihl MSA 60 C is the successor model to the popular Stihl MSA 120!Delivery WITHOUT battery and WITHOUT charger – see accessories!With the lightweight MSA 60 C-B, you can easily cut branches from trees and shrubs or cut and process fallen wood.This chainsaw is so quiet that you can use it without ear protection and in noise-sensitive areas such as residential areas. Thanks to its emission-free operation, you can even work with it in enclosed spaces.Technical data:Bar length 30 cm Weight 2.9 kg (saw without battery) Sound pressure level 83 dB (A) Battery life with AK20: up to 40 min / 160 cuts (10 x 10 square timber!),Charging time: AK20 with AL101: up to 80% / 100%: 135 min / 205 min.Translated with DeepL.com (free version)
Height 188 cm, WxD 100x40 cm, 5 shelves, load capacity per shelf 70 kg, no screws, assembled in 5 minutes.
The Multi Workshop Oil is lubricating, easy to penetrate, displaces water from metal surfaces, infiltrates moisture, and does not gum up or stick together. It offers reliable and lasting rust protection. The oil is the versatile, high quality and affordable liquid tool for almost every purpose. Multi workshop oil keeps everything that could creak, squeak or lock in good condition. Everything works like new, is protected and maintained. ~In use by well-known automobile manufacturers~ ~Tested according to DIN 50 021-SS (salt chamber spray test) ~Cleaning: Cleans dirty, oil-sticky metal parts, removes rust film and removes foreign particles.Lubricating: Keeps moving parts running smoothly. Cares for chains, sprockets, ball bearings, hinges, telescopic cables, etc., prevents mechanical wear ~Protecting: Reliably protects iron, steel and non-ferrous metals from corrosion< li>Protects against corrosion, preserves, cleans, lubricates, serves as a contact spray and rust removerExceptionally high rust protection and best adhesion propertiesFrees stuck mechanicsProven as a cutting oil PTFE and silicone free Shake very well before use Hazard statements: Extremely flammable aerosol. Harmful to aquatic organisms, with long-term effect. Container is under pressure: May burst if heated.Physical and chemical characteristics:Appearance: oily, brownish ~Smell: like petroleum ~Relative density: approx. 0.86 g/cm Lower explosion limit: approx. 1.5% by volume Upper explosion limit: 10.9% by volume Kinematic viscosity: approx. 21 mm/s Temperature range: -30 C to approx. +190C
Content: 0.2 l (€26.95 / 1 l)
bright silicone and resin-free lithium soapy, water-resistant, flex-stable, oxidation-resistant can be used at low to high speeds, at low and high temperatures, as a universal grease for general machine lubrication as well as for demanding lubrication points temperature-resistant from -30 C to + 120 C Dropping point: >~180 C DIN 51 502: K 2 K-30 Consistency class according to DIN 51 818: NLGI class 2 for the lubrication of plain and rolling bearings in construction machinery, conveyor systems, etc. as a lubricating grease in Construction and agricultural machinery Other technical properties Color: light Temperature: -30 C to +120C
Content: 0.4 kg (€17.90 / 1 kg)
BALLISTOL multi-purpose grease is characterized by the wide temperature range from -30C to +120C ~ and very good water resistance. This means it offers reliable long-term lubrication, good sealing and problem-free conveyability in central lubrication systems. It is resistant to wet and dusty environments as well as to cold and hot water.BALLISTOL multi-purpose grease reduces friction and wear, has a high pressure absorption capacity, is resistant to aging and flexing, and it also protects against corrosion. Does not contain silicone and does not become resinous.Typical uses:Automotive &~ Motorcycle Sliding and rolling bearings Construction and agriculture Industrial machines
BALLISTOL multi-purpose grease is characterized by the wide temperature range from -30C to +120C ~ and very good water resistance. This means it offers reliable long-term lubrication, good sealing and problem-free conveyability in central lubrication systems. It is resistant to wet and dusty environments as well as to cold and hot water. BALLISTOL multi-purpose grease reduces friction and wear, has a high pressure absorption capacity, is resistant to aging and flexing, and it also protects against corrosion. Does not contain silicone and does not become resinous.Typical uses:Automotive &~ Motorcycle Sliding and rolling bearings Construction and agriculture Industrial machines
Content: 0.4 kg (€13.47 / 1 kg)
Universal wire stripping pliers for gripping, stripping, cutting, separating, and crimping. Separates up to M3.5 thread, crimps 0.75–2.5 mm². Ergonomic 2-component handle for fatigue-free working. Total length 203 mm.
The try square is also called a rafter square, rafter square or speed square and has the shape of an isosceles right-angled triangle with a stop on a side. ~The variety of scales and recesses make the try square a multifunctional tool, which is ideal for marking lines and angles as well as as a scribing tool and saw guide. The try square from SOLA combines the functions of a ruler, try square, miter square, protractor, marking aid, saw guide and rafter knife.The rafter square in the shape of a right-angled triangle has a robust stop on a side for exact 90 and 45 markings. In addition, the stop in conjunction with the robust edge also serves as a sawing aid or saw guide. Parallel to the stop there is a recess with a metric scale in mm and cm (offset scale), which is ideal for marking vertical lines. ~The measuring leg of the other catheter also has a metric scale, the quick one Measurements allowed. Below this scale there is a recess with notches with which horizontal or parallel lines can be marked. The hypotenuse has a degree scale for angle measurements between 0 and 90. The desired angle degree is determined starting from the opposite pivot point (designation on the rafter angle: PIVOT). ~ ~Parallel to the degree scale there is another recess with two scales for shifter cuts. The lower scale is for ordinary rafters or normal rafters (designation on the rafter angle: COMMON), the upper scale for hip rafters and valley rafters (designation on the rafter angle: HIP-VAL). A 90 marking aid for purlin cuts runs at right angles to the degree scale. ~Technical data:Item name: ~ Rafter angleMaterial: ~ AluminumSurface: ~ coatedColor: ~ blackSpecial feature: ~ Stop ~Roof rafter gaugeScaling: ~ mm/cm, ~1-piece, laseredScale grid: ~ 1 mmAngle dimension: ~ 45, 90, variable 0 - 90Scribing holes: ~ 0.5cm
High-quality universal device made of stainless steel.With a comfortable 2-component handle. Length approx. 24cm.Can be used as ~Paint scraperNail pullerPaint scraper ~Paint roller cleaner
Mobile workbench for universal use. Quick assembly and disassembly thanks to foldable, height-adjustable legs. Easy to transport (only 22 kg), load capacity 120 kg, MDF table top with 960 x 710 x 20 mm and 20 mm hole pattern. All-round V-groove for suitable clamps, Dimensions: Folded: 750 x 1000 x 88.5 mm, Set up: 750 x 1000 x 1000 mm. Supplied with 2 x one-hand clamps, 4 x bench hooks and 2 x corner connectors.
Set consisting of the powerful multi-hammer, additional keyless chuck and practical SDS Plus drill and chisel set. The hammer can be used for two-speed non-impact drilling, hammer drilling and chiseling. With the Metabo Quick System, a quick change between SDS-Plus hammer chuck and keyless chuck for drilling in wood and metal is possible quickly and easily. The built-in Vario electronics and the two-speed transmission guarantee work at the right speed, even under load. Mechanical decoupling of the drive when the drill is blocked for safe working thanks to the built-in Metabo safety clutch. Precision-mounted high-performance impact mechanism in aluminum alloy housing, durable and robust. Adjusting wheel for pre-selection of speed and number of strokes, switch underneath protected against damage and dust, lockable switch for comfortable work in continuous use.Technical data:Max. Single impact energy (EPTA): 2.8 JMax. Impact rate: 4200 /minNominal input power: 800 WDrilling of concrete with hammer drills: 26 mmDrilling of masonry with drill bits: 68 mmDrilling steel: 13 / 6 mmDrilling soft wood: 32 / 28 mmNo-load speed: 0 - 1050 / 0 - 2500 /minSpeed at nominal load: 790 / 1860 /minTorque: 18 / 18 NmTool holder: SDS-plusClamping neck diameter: 50 mm Weight without power cable: 3.1 kg
High-quality multimeter for the following measurement functions: continuity test, transistor tester, diode test, capacity, frequency measurement and data hold function. ~Technical data: DC voltage: ~ 326 mV to 1000 VDC current: 326 mA to 10 AAC voltage: 3.26V to 750 VAC current: ~ 326 mA to 10 AResistance: 326 ohms to 32.6 ohmsCapacity: 0 to 32.6 qFFrequency: 10 Hz - 200 kHz
Revolutionary universal pliers for holding, gripping, cutting, stripping and crimping. Professional version with 2-component handle.
High-quality multi-purpose grease, ~specifically developed for the gearboxes of hedge trimmers. Electric chainsaws and cordless chainsaws.Tip: check the level in the gearbox after the first few hours of operation ~and top up if necessary!Tube with 80 grams.
Content: 0.08 kg (€143.75 / 1 kg)
Robust nail irons made of hardened steel, forged design for tough use. 1 piece of nail iron each 350, 600 and 900 mm.
Newly designed assembly iron with oval body for maximum stability, wide, narrow cutting edge for easy attachment in tight spaces. The optimized shape provides perfect power transmission even with vertical loads.
Large pack in proven quality
Hochwertiger Industriesauger mit 1.500 Watt starken Motor und 225 mbar Saugleistung. Die Saugleistung ist stufenlos einstellbar für optimale Anpassung an die jeweilige Verschmutzung. Durch die automatische Steckdose mit bis zu 1900Watt Leistung auch perfekt als Absauganlage für E-Werkzeuge und dgl. verwendbar.Ein Blasanschluss ermöglicht die zusätzliche Nutzung als Blasgerät. Der 40l große Edelstahlbehälter verfügt über große Räder für einen einfachen Transport und einen Ablass zum einfachen Entleeren bei der Verwendung als Nass-Sauger.Die Lieferung erfolgt komplett mit HEPA-Faltenfilter, Schaumstofffilter, Vliesbeutel sowie umfangreichen Düsenset und 3 m Saugschlauch 3600 Durchmesser. Eigengewicht nur ca.10kg. Leistungsstarker und stabiler Sauger für den universellen Einsatz in Werkstatt, Gewerbe oder der Landwirtschaft.
Ideal device for removing rust or coatings on rims, frames, etc. ~Also suitable for knocking off plaster, paint or concrete processing. ~Technical data: ~< /u>Air requirement depends. 170 L/min. ~Stroke rate approx. 3,200. ~Weight: 2.6 kg ~Working pressure: approx. 6 bar ~Equipped with 19 needles 3x180mm (DxL)
Special grease gun mouthpiece with pointed nozzle for funnel grease nipples according to DIN 3405 or difficult lubrication points.
VDE insulated, up to 1000 V with cutting edge 40 curved jaws manufactured in accordance with DIN EN/IEC 60900, individually tested special tool steel, forged, oil-hardened and tempered cutting edges additionally inductively hardened to 60 HRC serrated gripping surface Chrome-plated pliers with multi-component sleeves Other technical properties Jaw design: flat round Material: special tool steel
High-quality 2-arm trigger set with slim hooks. Clamping width 140 mm, clamping depth 100/200/250mm.
Start booster and power bank for all 12-volt batteries. ~The NOBB40 has a powerful lithium-ion battery that ensures trouble-free starting aid with up to 1,000A. ~Up to 20 starts with one charge . Very compact design 196x80x43mm and low weight: only approx. 1.2kg. Thanks to the additional USB (5V, 2.1A) and USB-Micro (5V, 2.1A) socket, it is also perfect as a power bank for cell phones, laptops and the like. Ideal for diesel or petrol cars, motorcycles, small tractors etc. Charging time with 2.1A charger approx. 3 hours.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.