Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
High-strength coupling hook for hanging into the chain, with secured bolt, for mounting on the chain link
High-strength slotted ring for hooking into the chain, tightens itself, with secured bolt, for mounting on the chain link. The extra large opening prevents the chain from jamming.
For releasing the plastic clips on door panels, suitable for all vehicle types.
Based on DIN, ISO 3318. Straight shape. Ratchet mechanism with 72 teeth. Back swing angle 5. Jaw position 15. Surface matt satin chrome plated. Chrome vanadium steel. In the holder.Contents: 8x9, 10x11, 12x13, 14x15, 16x18, 17x19 mm.
Solid workshop grinder with 600 watt/230 volt industrial motor. The bench grinder is equipped with one coarse disc K36 and one fine disc K80 measuring 175x20x32mm. Thanks to the adjustable workpiece support and the adjustable spark protection, easy and safe work is possible at any time. Dimensions: 465x316x302 ~ LxWxH, weight approx. 12.5 kg.
Krnzle short double lance, for continuous pressure regulation on the lance - delivery without HP nozzleWith the short Krnzle double lance, the pressure on the lance can be continuously regulated by opening the nozzles. ~1. Nozzle open = high pressure1. + 2nd nozzle opened = low pressure with great flushing effectTechnical data: ~M22x1.5 AG
Made of chrome vanadium, top quality, also for industry &~ Business.
Design according to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Jaw position 15. Surface matt satin chrome plated. Chrome vanadium steel. In the holder.Contents: 6x7.8x9.10x11.12x13.14x15.16x17.18x19.20x22.21x23.24x27.25x28.30x32 mm.
Design according to DIN 895, ISO 3318, ISO 1085. Jaw position 15. Chrome vanadium steel. Surface matt satin chrome plated. In the holder.Contents: 6x7.8x9.10x11.12x13.14x15.16x17.18x19.20x22.21x23.24x26.25x28.27x32 mm.
Open double ring wrench with a wrench size of 17 mm. Particularly suitable for hard-to-reach places, suitable for most diesel engines. Chrome-plated version, 12-point.
ideal for transporting heavy objects such as windows, glass doors or mirrors 120 mm , up to 60 kg
Robust drawers/tool cabinet with 2 drawers each 520x535x150 and 520x535x190mm (WxDxH). Load capacity 80Kg per drawer. Color light gray RAL 7038 and enzin blue 5010. Weight 45kg. High-quality design for tough use in the workshop.
Ground HSS twist drills with high cutting performance and long service life. Contents: yes10 pieces 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5 and 8mm as well as 5 pieces each 8.5/ 9/ 9.5/ and 10mm
Robust design with user-friendly rubber handle.
Professional SDS-Plus 4-cutter drill bit for hard or reinforced concrete.Contents: 5/6/6 x 115 mm, 6/6/8/8/8/10/12 x 165 mm in a PACKOUT-compatible cartridge.
Professional HSS twist drill bits with a special drill tip for precise centering without pre-drilling, even on rounded surfaces – very fast and smooth drilling.Tin-coated tip for extra-long service life and excellent drilling performance in steels up to 1,000 N/mm².25 drill bits with a 0.5 mm pitch and a 3-flat shank to prevent slippage in the chuck (4.0 mm and larger).Supplied in an impact-resistant plastic case.The innovation for effortless, precise, and fast drilling.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.19-piece set with drill bits from 1.0 to 10.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treatable steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure hold in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.25-piece set with drill bits from 1.0 to 13.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean results.6-piece set, containing one drill bit each in 2, 3, 4, 5, 6, and 8 mm sizes.
Professional HSS twist drill in a ground design for a long service life and optimal drilling performance. Metal cassette equipped with drill bits from 1.0 - 10.0mm with a pitch of 0.5mm.
High-quality HSS cobalt drill bits for use when drilling high-quality steels up to a strength of 800N/mm2, e.g. stainless steel. Metal cassette from 1.0 to 10.0mm, pitch 0.5mm.
High quality HSS cobalt drill bits for use in high quality steel such as stainless steel. Metal cassette with drill 1.0-13.0mm in 0.5mm pitch
Professional HSS twist drill in ground design for a long service life and optimal drilling results. Metal cassette with drill 1.0 - 13.0mm in 0.5mm pitch.
High-quality HSS drill set for universal use in alloyed and unalloyed steel. Sizes 1.0 - 10.0mm in 0.5mm pitch.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.