Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Powerful drilling with low vibrationsSafe hammer thanks to AUTOSTOP™ technologyFIXTEC™ quick-change tool system for various applicationsThe fastest rotary hammer in its class, resulting in increased productivityPowerful hammer mechanism delivers 2.5 joules of impact energy with low 12.9 m/s² vibrationsDrills up to 125 ⌀ 10 x 50 mm holes with one M18™ HIGH OUTPUT™ 5.5 Ah battery chargeAUTOSTOP™ switches the tool off to protect the user in dangerous situationsFIXTEC™ system for tool-free chuck change between SDS-Plus and 13 mm metal chuckAll-metal gear housing - optimum fit of the gears for increased tool life4 operating modes: rotary hammering, hammering only, drilling only and Variolock for maximum versatilityCompatible with M18 FCDDEXL or M18 FDDEXL dust extractorsThe FUEL™ platform was developed for the most demanding users. The technology delivers maximum performance and combines three central components -100% system-compatible with the MILWAUKEE®-M18™ product rangeSupplied without battery and charger (FAIE no. 129044)Technical data:Designation: Model variant: M18 FHX-0XSupplied in HD boxWeight: 3.4 kgWeight with battery: 4.4 kgIdle speed: 0 - 1330 rpmMax. Drilling diameter in concrete: 26 mmMax. Drilling diameter in wood: 28 mmMax. Drill diameter in steel: 13 mmMax. Impact speed: 0 - 4800 [min_1]Impact energy: 2.5 EPTA JVoltage: 18 V
Practical, lightweight everyday helper for drilling and screwingMobile workshop (74 pieces): 5 wood drill bits (4/5/6/8/10mm), 14 HSS drill bits (1.5/1.5/2/2/2.5/3/3/3.5/4/4.5/5/5.5/6/6.5mm), 20 screwdriver bits length 25mm (PH1/PH2/PH2/PH3/PZ1/PZ2/PZ2/PZ2/PZ3/H3/H4/H5/H6/T15/T20/T25/T30/S4/S5/S6), 10 screwdriver bits length 50mm (S4/S5/S6/PZ1/PZ2/PZ3/T15/T20/T25/T30), 10 screwdriver bits length 75mm (S4/S5/S6/PZ1/PZ2/PZ3/T15/T20/T25/T30), bit holder (60mm), 8 socket wrenches (6/7/8/9/10/11/12/13mm), Wooden countersink (12.7mm), centering pin (5x100mm), Cutter knife with 2 spare blades, tape measure (3m/10"), pencil (HB), notepadIntegrated work light to illuminate the work areaWith practical belt hook, can be fixed on the right or left without tools Technical data:Battery voltage: 18 VBattery capacity: 2 x 2 AhMax. Soft torque: 24 NmMax. Torque hard: 48 NmAdjustable torque: 0.5 - 4.5 NmDrill Ø steel: 10 mmDrill Ø softwood: 20 mmIdle speed: 0 - 450 / 0 - 1600 /minDrill chuck clamping width: 1 - 10 mm Scope of delivery:Quick-action drill chuckBelt hook2 LiPOWER battery packs (18 V/2.0 Ah)SC 30 chargerAccessory set
Powerful cordless impact drill with 82 Nm torque. 2-speed metal gearbox with impact function and sturdy 13 mm keyless chuck. Compact, brushless motor for the toughest applications and a long service life. Special offer set with tool, 18 V/5.0 Ah battery.Supplied with charger and practical carrying case.
Milwaukee professional cordless drill/driver with up to 158Nm torque. ~Despite high performance, extremely compact design with only 173mm length, ideal for tight spaces or long working days. ~The drill/driver has a metal 2 -gear transmission, a stepless speed setting (0-500, 0-2,100) and R+L-run. ~The robust 13mm keyless chuck ensures a secure tool hold during heavy use. ~With the standard LED Work light means you always have a perfectly illuminated working area. ~Delivered with case but without battery and charger. Faie No. battery starter set: 124169
Compact drill driver with a length of only 173 mmNewly developed drill chuck for improved bit and drill bit retentionLED workplace lightingPowerful 158 Nm torqueThe compact dimensions of 173 mm in length allow work even in hard-to-reach placesAUTOSTOP™ function to protect against over-tightening and for greater safetyFastest drilling and screwdriving applications under loadLED workplace lightingBattery charge level indicatorMetal belt clipSupplied without battery and charger (FAIE No. 129044)Technical dataBattery: Li-ionBattery system: M18Designation: Model variant M18 FDD3-0XDrill chuck_clamping range: 13 mmSupplied in 1 HD boxWeight with battery: 2.1 kgMax. Drilling diameter in wood: 89 mmMax. Drill diameter in steel: 16 mmMax. Torque: 158 NMVoltage: 18 V
This 18V cordless drill/driver system with up to 65 Nm of torque enables powerful screwdriving and precise drilling, even under demanding conditions. Its compact design makes it comfortable to hold and facilitates overhead work and working in confined spaces.Advantages & Features• Brushless motor – high efficiency, longer runtime, and reduced maintenance• Aluminum gearbox housing – robust construction for heavy-duty use and a long service life• LED work light with afterglow – even illumination in low-light conditionsFrequently Asked QuestionsIs the tool suitable for intensive use?The robust housing and overload protection allow for use under heavy loads.Which batteries can be used?Compatible with all 18V CAS battery packs and chargers.Is any accessory included?The tool is supplied in a metaBOX, without a battery or charger.
Profi Akku-Fettpresse mit 2 Arbeitsstufen für Auspressdruck bis 690 bar. Die Auspressmenge ist in 10 Stufen einstellbar. Die Presse kann mit Direktbefüllung, Gebinde oder 400 g Standard Fettkartuschen befüllt werden. Keine Luft im Fettraum durch integriertes Entlüftungsventil, optimales Arbeiten durch langen (1200 mm) Schlauch und LED-Lampen am Gerät und beim Mundstück, Magnet und Schultergurt für komfortables Arbeiten. Komplett mit 2x Akku 18 V/2,0 Ah, Ladegerät und Metabox-Systemkoffer.
Practical hammer drill, battery operated. 40-fold chisel adjustment, motor brake, drilling, impact drilling or chiseling functions. With dust-protected tool holder, suitable for SDS plus. Includes new rubber damping construction - reduces vibrations on the machine, battery and battery contacts. With LED light with afterglow function and slip clutch. For 18V lithium battery system, delivered loose in a box.Technical data:Tool holder: SDS plusNo-load speed: 0 - 1,100/minImpact rate: 0 - 4,000/minDrilling performance (steel/concrete/wood): 13/20/26Single impact strength: 2.0JBattery: 18V< /li>Weight: 4.0kgDimensions: 358x84x259mmAccessories included: depth stop, side handle.
Dust container with a capacity of 540 mlFloor nozzle for hard floors and smooth surfaces Crevice nozzle for hard-to-reach places Upholstery nozzle for cleaning upholstery and materialsExtension tube (0.465 m) for use as a canister vacuum cleanerDelivered without battery and without charger (sold separately)The Einhell cordless handheld vacuum cleaner TE -VC 18 Li solo is a handy power pack from the Power X-Change family from Einhell. Whatever happens in the house, whether crumbs on the carpet, the sofa, the parquet or tiled floor: the cordless handheld vacuum cleaner adapts to the respective conditions and makes it possible to clean any surface quickly and thoroughly with an individual attachment. A floor nozzle is especially suitable for hard floors and smooth surfaces. A second nozzle is designed for upholstery and fabrics. The dust collection container has a capacity of 540 milliliters.
Milwaukee professional cordless impact drill with max. 158Nm for the toughest applications. ~Can be used for practical drilling and screwing work thanks to the metal gear with 2 gears and impact function. ~The short length of only 175 mm provides Easy to work with even in tight spaces.Of course, this top-of-the-line device has electronic speed control and an R+L run. The impact-resistant 13 mm keyless chuck ensures that the tool is held securely in every use. The standard LED light ensures safe illumination and thus a good view of the work area in any light. ~It is delivered with Case, drill chuck and additional handle but without battery and charger.Faie No. Battery ~ - Starter set ~ 124169
Powerful and extremely compact impact wrench with max.339Nm.The short overall length of just 124 mm and the low weight of 1.8 kg (incl. battery) make it ideal for use in hard-to-reach places, on assembly sites or for overhead work.DRIVE CONTROL™ allows you to quickly switch between 4 gear steps with different speed and torque settings.Precise working, helps prevent damage to the screw and material, for maximum performance and the toughest applications and for smart working; the device switches off automatically as soon as the screw connection is made.Three LEDs ensure optimum illumination of the work area½″ Square snap ringMetal belt clipSupplied without battery and charger. File no. battery and charger starter set: 124169Technical data:Idle speed (min-¹): 0-900 / 0-1650 / 0-2400 /0-1200Impact speed (min-¹): 0-1000 / 0-2400 / 0-3400Max. Torque (Nm): 102 / 203 / 339 / 34Max. Release torque (Nm): 339
The M18 FUEL™ cordless impact wrench with ONE-KEY™ technology delivers 1,017 Nm of torque in a compact 206 mm size, giving you a better grip on the workpiece.DRIVE CONTROL allows you to quickly switch between 4 gear stages with different speed and torque settingsLevel 4 - for an optimum mix of power and precision when loosening screws. 1/2” square PIN socket.ONE-KEY™ Tool-Tracking and Tool-Security offers a free cloud-based tracking and inventory management platform for your tools. Supplied without battery and charger (FAIE No. 129044)Technical data:Battery voltage: 18 VIdle speed: 1st/2nd/3rd/4th speed 0-950/0-1,500/0-1,800/0-1,800 min-1 Impact speed: 1st/2nd/3rd/4th stage 0-1,150/0-2,100/0-2,400/0-2,400 min-1 Max. Tightening torque: 1st/2nd/3rd/4th stage 190/400/1,017/1,017 NmMax. Loosening torque: 1,491 NmTool holder: 1/2” square with PINWeight with battery (5.0 Ah): 3.2 kg
Professional cordless jigsaw for the Milwaukee 18V system.Powerful brushless motor for long service life and high cutting performance – up to 32 m in 19 mm OSB board with a single 5.0 Ah battery.Cutting capacity up to 100 mm, easy, tool-free blade change thanks to FICTEX technology.6-stage adjustable cutting speed suitable for all materials.5-stage adjustable pendulum stroke for optimal cutting results.The standard dust blower and LED work light ensure optimal visibility in all lighting conditions and during long cuts.Battery and charger not included.
High sawing performance: over 32 meters in chipboard (19 mm) with just one battery charge Extremely handy thanks to the small handle circumference and soft grip surface Precise and material-appropriate sawing thanks to variable Number of strokes, pendulum stroke and low-lying, spring-supported saw blade guide Switchable chip blowing function ensures a clear view of the interface Integrated LED work light to illuminate the interface Delivery without battery and charger. Faie No. Battery and charger starter set: 124169Technical data:Type of battery pack: Li-IonVoltage of the battery pack: 18 V< br>Largest material thickness in wood: 100 mmLargest material thickness in steel: 10 mmPendulum stroke levels: 5Number of strokes when idling: 800 - 3,500 rpmWeight (with battery pack): 2.9 kg (without battery pack, without charger)
Powerful battery-powered light with independently rotating light headBalanced handle positionFour keyhole slots for variable mounting options4000 lumen TRUEVIEW™ highly efficient lightingUp to 12 hours runtime with one M18™ REDLITHIUM™ 5.0 Ah batterySpotlight head can be rotated by 120° and pre-screwed holes for horizontal and vertical hangingShock-resistant spotlight head and roll cage for maximum service lifeHybrid power source: Operation either with an M18™-REDLITHIUM™ battery or by cableEasy one-handed transportation thanks to integrated carrying handlesLow charge warning - lamp starts to flashSupplied without rechargeable battery and charger (FAIE no. 129044)Technical data:Max. Luminosity 4000 / 2000 / 1200 lumenMax. Running time 3.0 / 6.0 / 12.0 hWeight with battery approx. 3.3 kgTranslated with DeepL.com (free version)
Multitool mit oszillierendem Bewegungsablauf (2,1° links/rechts) Werkzeugloses FIXTEC™-Schnellwechselsystem und Universal-Adapter für Wettbewerbs-Zubehör Professionelles 18-V-Multitool zum Trennen, Sägen und Schleifen Akku-Multitool mit POWERSTATE™-Motor, unterstützt durch den oszillierenden Bewegungsablauf von 2,1° links/rechts, optimal geeignet für professionelle Geeignet für verschiedene anspruchsvolle Anwendungen, z. B. Rissschnitte durch Harthölzer und Holz mit Nägeln 10 Geschwindigkeitseinstellungen mit Sanftanlauf Werkzeugloses FIXTEC™-Schnellwechselsystem und Universal-Adapter für Wettbewerbs-Zubehör 180° LED-Beleuchtung des Arbeitsbereichs.Lieferumfang: 1x oszillierende OPEN-LOK-Holzklinge, 1 x Schleifteller, 1x Schleifpapier mit 60er Körnung, 1x 80er Schleifpapier, 2x 120er Schleifpapier.Lieferung ohne Akku und Ladegerät (FAIE Nr. 129044)Technische Daten:Ausführung: Li-IonSpannung: 18 VOszillationswinkel: rechts/links 2,1ºLeerlaufschwingzahl: 10000-20000 (r/min)Gewicht: 1,9 kgType: M18 FMT-0X
The GE-LC 18 Li T cordless pole pruner is a powerful device that can be used to trim higher branches effortlessly from the ground, regardless of the power supply. The versatile Power X-Change cordless system from Einhell makes extended work operations possible! Metal gears for high durability and the OREGON quality bar and the OREGON chain for clean cutting results. The 880 mm ~ Up to 1840 mm infinitely lockable telescopic handle (results in a total length of up to 2770 mm) can be precisely adjusted to the desired working height up to approx. 4 measuring device. The also continuously adjustable additional handle is included The practical quick-release fastener adapts to every user. The attachment, which can be rotated through 90, ensures effortless horizontal cuts. In order to be able to carry out even difficult cuts at height cleanly and precisely, the motor head can be tilted 7 times and the main handle 4 times, thus adapting it to any work situation. The claw stop prevents this slipping when sawing. The automatic chain lubrication via an oil container supplies the OREGON chain with the necessary lubrication. If necessary, it can be tensioned and changed without tools using the practical chain tensioner. A chain catch bolt reliably prevents the chain from accidentally slipping off the bar.The most important facts at a glanceSystem battery - power X-Change batteryBattery level indicator with 3 LEDs90 rotatable attachment for easy horizontal cuttingMotor head can be tilted 7 timesMain handle can be tilted 4 timesInfinitely lockable aluminum telescopic handle - working height up to 4 meters!Adjustable additional handle with quick releaseOREGON quality sword and chain< /li>Tool-free chain tensioning and chain changingMetal gear for long service lifeOil container for automatic chain lubricationClaw stop Chain catch boltTechnical data: 18 volt Power X-Change battery system, max. 17 cm cutting length, weight 4.6 kg.Without battery and without charger!
Powerful cordless pruner for professional use in the tree care sector.With practical telescopic shaft, resulting in a long reach. Low-vibration and very quiet also ideal for urban areas. With side chain tension and captive nut on the sprocket cover.Technical data:Total length: 270-390mmRail length : 30cmWeight: 4.6 kgSaw chain pitch: PBattery system: Lithium Ion PROBattery runtimes:Battery runtime with AP 100/200/300/300S: up to max. 18 min / 42 min / 55 min / 68 min.< li>Battery life with AR 2000/3000: up to max. 195 min / 300 min Delivery without battery and without charger!
Handy cordless pruning saw cuts hardwood up to 75 mm. Very light and easy to handle thanks to its low weight of just 2.3 kg. The standard oil reservoir ensures a long service life for the chain. Technical specifications: Bar length 15 cm, chain speed 5 m/s, weight: 2.3 kg, cutting capacity: up to 120 cuts with a 4.0 Ah/12 V battery. Comes complete with chain and bar, but without battery or charger.
A very practical cleaning tool for small jobs around the house.This cordless pressure washer is ready to use in moments and, with up to 24 bar of pressure, is surprisingly effective for cleaning vehicles, garden furniture, windows, and much more. Water is supplied via a standard garden hose or, if no water line is available, independently of a water mains connection using a container or the included collapsible water container.Thanks to the battery operation (included), a mains connection is not required.Technical specifications:Maximum pressure: 24 barWater flow rate: max. 230 L/hWater temperature: max. 40°CWeight: only 1.3 kgRuntime with one battery: approx. 15 minScope of delivery: tool, 4-in-1 nozzle, spray lance extension, spray hose with filter, collapsible water container, cleaning agent spray set, and practical storage bag. Complete set: includes 2x AS2 batteries and AL1 charger.
A very practical cleaning tool for small jobs around the house.This cordless pressure washer is ready to use in moments and, with up to 24 bar of pressure, is surprisingly effective for cleaning vehicles, garden furniture, windows, and much more. Water is supplied via a standard garden hose or, if no water line is available, independently of a water mains connection using a container or the included collapsible water container. Thanks to its battery operation (battery not included), a mains connection is not required.Technical specifications:Maximum pressure: 24 bar, maximum water flow rate: 230 L/h, maximum water temperature: 40°C, weight: only 1.3 kg, runtime with one battery: approx. 15 min.Scope of delivery:` ...
Powerful compact reciprocating saw. Thanks to Red-Lithium technology, maximum performance, gentle charging, optimal energy utilization and a long service life. ~Thanks to One-Key technology, you can locate and monitor your tool at any time. ~Delivery without battery and charger. Faie No. Battery and charger starter set: 124169Technical data:Type of battery pack: Li-IonVoltage of the battery pack: 18VMax. Cutting depth of softwood: 300mmMax. Cutting depth steel: 20mmMax. Cutting depth aluminum: 25mmMax. Cutting depth non-ferrous metal: 25mmMax. Cutting depth of metal pipes: 150mmNo-load stroke number: 0 - 3,000 /minStroke length: 32mmWeight (with battery pack): 3.8 kg
High-quality pipe wrench made of chrome vanadium steel, drop-forged, painted blue, polished, adjusting nut lock, pliers mouth inductively hardened ~Total length 420mm, for pipes up to 1 1/2 inches.
Total length 330 mm Span 0-45 mm for pipes 1 inch S-jaw Chrome vanadium steel drop forged painted blue, polished Locking nut lock Plier jaw inductively hardened Other technical properties Material: chrome vanadium Steel Model: S-mouth
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.