Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Charger for the STIHL AS 2, AP &~ AK batteries, Lithium Ion PRO system,Cable storage with practical Velcro strap, wall mounting possible.Connection 230V, power consumption 0.1 kW, charging current 1.6 A, weight 0.7 kg.Charging time AK 10: <~cbht />~ 80 min 1)Charging time AK 20: <~cbht />~150 min 1)Charging time AK 30: <~cbht />~205 min 1)Loading time AP 100:<~cbht />~ 90 min 1)Charging time AP 200:<~cbht />~165 min 1)Charging time AP 300:< ~cbht />~250 min 1)1) Charging time in minutes to 100% capacity
Intelligent battery charger with microprocessor control through multi-stage charging cycle, microprocessor controlled and monitored, optimal for seasonal vehicles with long standing times (convertible/bike).Charging and external starting in one device, the voltage (12V or 24V) to match the vehicle battery is selectable. It is an all-round battery charger for various types of batteries, gel, AGM, maintenance-free and low-maintenance lead-acid batteries.The trickle charge function guarantees a permanent ideal charge condition, regular use extends battery life.Led battery voltage and charge progress indicator.Electronic overcharge, short circuit and reverse polarity protectionFully insulated battery terminalsErgonomic handle for optimal transport
Microprocessor-controlled charger with 2 - 10A output. Suitable for practically all 12V batteries from 3-200 Ah including gel, AGM and maintenance-free lead-acid. Batteries. With trickle charge function &~ LCD display in a compact design.
2in1 all-round charging and starting device for GEL, AGM &~ maintenance-free and low-power lead-acid batteries. With intelligent microprocess control and multi-stage charging cycle, as well as trickle charging function &~ LED battery voltage and charging progress display. Ideal for use in seasonal vehicles, with fully insulated battery terminals and ergonomic handle for optimal transport. Mains connection 230V, charging voltage 12V. With jump starter 100A - 5 seconds charging current 2.7-15A.
Intelligent all-round battery charger with microprocess control and multi-stage charging cycle, suitable for gel, AGM, maintenance-free and low-power lead-acid batteries. Also ideal for seasonal vehicles, with winter charging mode for outside temperatures below 5C, including fully insulated battery terminals, hanging loop and LED voltage and charging progress display. Mains connection 230V, charging voltage 12V, charging current 1-2A.
Microprocess-controlled, intelligent charger with multi-stage charging cycle, for GEL, AGM, maintenance-free and low-power lead-acid batteries. With trickle charge function for a permanent, ideal charge level. Ideal for seasonal vehicles, with winter charging mode and reconditioning mode for charging deeply discharged batteries, as well as power supply mode for use as a power supply. Includes LCD display with voltage and charging progress display, as well as electronic overcharging, short circuit and reverse polarity protection. Mains connection 220-240V, charging voltage 12V, charging current 1-4A. With hanging loop for attaching and fully insulated clamps.
The Einhell battery charger CE-BC 1 M is an intelligent all-round battery charger with microprocessor control for a wide range of battery types.For gel, AGM, maintenance-free and low-maintenance lead-acid batteries< /li>Push button to choose between 6/12V vehiclesProtection class IP65: Dust-tight and protected against jets of waterFloat charging function for a permanent, ideal charging state Ideal for seasonal vehicles with long idle times (convertibles/motorcycles)Increase in battery life through chargingElectronic overcharging, short circuit and reverse polarity protectionFully insulated battery terminalsTechnical data:Mains connection: 220-240V / 50 HzCharging voltage: 6 V / 12 V Length: 151 mmWeight: 0.21 kg
Compact electronic charger with 10-stage charging process for optimal charging of 6V or 12V batteries from 4-120Ah. Ideal for seasonal vehicles such as motorcycles, lawn tractors, and similar vehicles thanks to its trickle charge function. Rescue function for deeply discharged batteries, for all common batteries such as PB, GEL, AGM, WET, and LiFePO4.Technical data: Power consumption: 70W/230V, dimensions: 220x60x60mm, weight: 0.5kg.
The Digital GDB 24V/12V-200 battery charger from Güde is suitable for all standard 12 V and 24 V batteries and is safe and simple to operate thanks to its intelligent charging technology. The microprocessor-controlled inverter technology protects the sensitive electronics of your vehicle and therefore allows direct and completely safe charging of batteries that are connected in the vehicle. The particularly battery-friendly 10-stage charging process ensures the longest possible battery life at full power. It includes a fully automatic diagnosis, charging and maintenance function as well as a rescue function, which can be used especially for deeply discharged batteries (from 1.5 V). The jump-start function (up to 250 A) is also very useful in some unpleasant situations. The device also has a number of technical protection mechanisms, such as overcharging, short-circuit, overheating and reverse polarity protection. Once the charging process is complete, i.e. the battery is fully charged, the device also automatically switches to trickle charge mode. This means it can remain permanently connected to maintain the battery's full state of charge. The practical LED display gives you information about the current charging current, the charging voltage and the charging progress. It goes without saying that the battery charger is spark-proof, the battery terminals are fully insulated and the device is easy to maneuver thanks to its two castors, despite weighing just under 17 kg. Inverter technology for efficient energy useProcessor-controlled intelligent charging technologyBattery-friendly 10-stage charging processFor all standard 12 V and 24 V batteriesDirect charging of a battery connected to the vehicle possibleConstant charge retentionOvercharging, short-circuit, overheating and reverse polarity protectionRescue function especially for deeply discharged batteries (from 1.5 V)Fully automatic diagnosis, rescue, charging and maintenance functionSpark-proofJump-start function up to 250 ALED display for charging current, charging voltage and charging progressFully insulated battery terminalsEasy to transport thanks to 2 castorsBattery types: PB, GEL, AGM, WET, PB - lead-acid battery (also MF), GEL - gel battery, AGM - flow battery, WET - wet battery Technical data: Mains voltage: 230 VFrequency: 50 HzOutput voltage: 12 / 24 VFuse protection, slow-blow: 16 AMains power: 8000 WCharging current rms: 10/20/35/50 ABattery capacity: 20-550 AhNumber of fuses: 10 pcs.Fuse: 100 AJump start device 1.5 V: 250 ABattery start without pre-charging: 35-50 AhLength: 304 mmWidth: 295 mmHeight: 674 mm
Inexpensive charger for 12V batteries. Charging voltage 5A. Manual charging current display. Ideal charger for every car.
Universally usable for all Power X-Change batteries. Parallel, rapid charging of two batteries is possible using fast charging technology, with integrated refresh mode for reactivating deeply discharged batteries. Current charging status display via 6 LEDs. Ideal for 36V applications.
Electronically controlled charging and starting device for all common starter batteries in the automotive sector. Suitable for gel and AGM batteries. Charging strength adjustable in 2 levels (4A or 12A), switchable for 24V batteries. Also suitable for trickle charging (seasonal vehicles, lawn tractors, etc.) thanks to electronic charging control. BOOST function with 100A as a starting aid. Winter mode ensures optimal charging even at temperatures below 0C. Supplied with 1.5m charging cable and carrying handle.Technical data:Power: 270WCharging voltage: 12/24 VCharging current: 4/8/15/100 ACharging cycles: 6Connection voltage: 230VDimensions (LxWxH): 295x235x195mmWeight: 8.5kgArea of application:Suitable for battery types: AGM, GELArea of application: charging: motorcycle, car, kB, kT, trucks<~7.5t, boatsArea of application starting: Motorcycles, cars, kB, kT, trucks<~7.5t, boats
Automatic charger with 3.5/7 A charging capacity, ideal for batteries from 30 - 120 Ah. The fully automatic charging process also makes it possible to charge wet, AGM and GEL batteries. Furthermore, trickle charging offers the possibility of gently and permanently charging rarely used batteries (boats, vintage cars). With this device, batteries in vintage cars, for example, can be kept in an optimal state of charge for months.
Professional cordless grease gun with max. 690 bar, Now for a short time for free - see photofor direct filling, containers or 400g standard grease cartridges, LED light for optimum visibility, grease quantity adjustable in 10 steps. 1200mm hose and nipple, without battery pack without charger.
Powerful battery-powered grease gun.You can empty up to 7 cartridges with one battery charge.Technical data: ~Battery system: 18VCapacity: 400g CartridgesHose length 1219mmPressure: 690 barWeight 3.9 kgDelivery without battery and charger.Faie No. Battery and charger starter set: 124169
High-quality, newly developed grease gun for the safe and comfortable delivery of all commercially available greases. . Long delivery hose (1m) ideal for use even when space is limited.Continuous grease delivery perfect even for large lubrication points. Suitable for 400g cartridges or loose fat. Max. pressure: 680 bar, flow rate: approx. 150 g/min, weight: 3.56 kg. Complete with charger (1 hour), 2 batteries 20V/2.0Ah, hose, pipe, mouthpiece and transport case. 2 adjustable grease delivery speeds.Delivery volume/battery capacity: approx. 25 cartridges 400g without counter pressure, approx. 7 cartridges with 100g counter pressure.With LED light on the grease gun head, soft grip, as well as stand and hose holder.
Powerful and at the same time very compact impact wrench with a max. 881Nm loosening torque. ~With a length of only 152mm and the low weight of 2.3kg (including battery) ideal for commercial use (tire service, agriculture, etc. ) suitable. ~Delivery without battery and charger. Faie No. Battery and charger starter set: 124169Technical data: ~Torque: 475/ 610/ 745/ 47Nm ~Max. Release torque: 881 NmIdle speeds: 0 - 1,250/ 0 - 1,950 / 0 - 2,575 / 0 - 1,325 /min. ~Max. Screw diameter M2.2 ~Weight (with battery pack): 2.3 kg
Powerful compact impact wrench. Thanks to Red-Lithium technology, maximum performance, gentle charging, optimal energy utilization and a long service life. ~Thanks to One-Key technology, you can locate and monitor your tool at any time. ~Delivery without battery and charger. Faie number battery and charger: 124169Technical data:Type of battery pack: Li-IonVoltage of the battery pack: 18VMax. Torque: 226 NmIdle speeds: 1,750/ 3,000 /3,900 / ~0 - 3,900 /minStroke rate: 1,400/ 3,600 / 4,400 / ~0 - 4,400 /minWeight (with battery pack ): 1.7kg
Powerful compact impact wrench with 3/4" square drive. ~The maximum loosening torque of up to 2034 Nm makes it ideal for heavy-duty applications in industry or agriculture. ~Thanks to one-key technology, you can do it at any time Locate and monitor your tool.Despite extremely robust construction and high torque, it only weighs 3.5 kg (including battery). ~Delivery without battery and charger. Faie No. battery u Charger starter set: 124169Technical data:Type of battery pack: Li-Ion ~Voltage of the battery pack: 18V ~Max .Torque: 702/ 1138/ 1627/ 1627 Nm ~Max. loosening torque: 2034 Nm ~No-load speeds: 0 - 800/ 0 - 1,300 / 0 - 1,800 / 0 - 1,800 /min ~Impact number: 0 - 850/ 0 - 1,850 / 0 - 2,400 / 0 - 2,400 /min ~Weight (with battery pack): 3.5 kg
The Buffalo! Extra-strong 1/2" impact wrench with 1,898Nm loosening torque - loosens "every" screw. ~Thanks to one-key technology, you can locate and monitor your tool at any time. ~Despite the extremely robust design, only 3 ,3Kg including battery. ~4-shock levels adjustable. ~Delivery without battery and charger. Faie No. battery and charger: 124169Technical data: ~Type of battery pack: Li-IonVoltage of battery pack: 18V ~Max. torque: 130/400/1356/1356 Nm ~Max. loosening torque: 1,898 Nm ~No-load speeds: 0 - 950/ 0 - 1,750 / 0 - 2,100 / 0 - 2,100 /min. ~Max. screw diameter M33 ~Weight ( with battery pack): 3.3 kg. ~
Powerful lithium-ion battery for the Portable Winch PCW 3000 Li cordless winch.Professional performance and high efficiency provide sufficient energy to operate powerful tools over a long period of time. The battery is also characterised by particularly low self-discharge. Only 1.25 % per month. With charge level indicator, charging time approx. 90 minutes, only 2.6 kg.
High-quality pole grease for secure contact and protection
Content: 0.05 kg (€145.00 / 1 kg)
The durable blue and temperature-resistant film protects battery poles, pole terminals and plug connections from corrosion, weather influences and battery acid. Particularly suitable in the area of vehicle workshops, shipping companies and fleets. Prevents contact resistance and voltage drop - thus increasing the lifespan of the battery.Do not spray on paint! Remove residues on the paint immediately, otherwise stains may occur! Silicone-freeTemperature: -40C to 120C
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.