Forestry

Useful aid for home and garden, 80 m, approx. 2 mm .

​STIHL HTA 50 Cordless Pole Pruner – Quiet and PowerfulThe STIHL HTA 50 is a practical cordless pole pruner for garden and property maintenance.It is ideal for pruning high branches, maintaining shrubs and trees, and removing deadwood.The compact cutting head ensures good visibility when working in tree canopies.The tool uses batteries from the STIHL AK system and operates particularly quietly, so you can usually work without hearing protection.The ergonomic handle fits comfortably in the hand and allows for easy two-handed operation.The 1/4" PM3 saw chain ensures clean and efficient cutting performance.Thanks to its light weight and side-mounted chain tensioner, the chain is easy to adjust.The semi-transparent oil tank makes it easy to check the oil level.The branch hook on the cutting head allows you to conveniently remove loose branches.The pole pruner has a total length of 280 cm.The two-piece shaft makes it easy to transport and store.With an optional shaft extension, the length can be increased to 330 cm.Battery and charger not included.Technical specifications:Nominal voltage: 36 VMax. voltage: 40 VPower: 0.60 kW 1)Recommended battery: AK 20Device weight without battery: 3.6 kg 2)Guide bar length: 25 cm 3)Groove width: 1.10 mmChain pitch: 1/4"PIP Protection Rating: IPX0Max. device length with tool: 280 cmSound pressure level: 78 dB(A) 5)Sound power level: 94 dB(A) 5)Vibration level left: 0.5 m/s² 6)Vibration level right: 1 m/s² 6)

Husqvarna semi-chisel saw chain, ~which has been specially developed for cordless chainsaws to increase cutting speed and efficiency. ~Optimized geometry for a smooth cut and improved maneuverability.suitable for Husqvarna battery chainsaws 535iXP, T535iXP, 540iXP, T540iXP.

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is loosened to be pulled out. The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield. Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 1400 kg pulling force at 175 bar,large drum with 40 meters of 6 mm wire rope with hook,The rope speed is 0.45 meters / second at 40 liters/min. Connections: 3/8?AG/IT..

​Crane winch, auxiliary winch with gear reduction for higher pulling force, the reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply connect to a double-acting control unit.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1700 kg pulling force at 175 bar,Large drum with 35 m 8 mm wire rope with hook,The rope speed is 0.36 metres / second at 40 l/min.Connections: 3/8 inch AG/IG.

​Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling force. The gear reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply install in a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer line and extra return line,max. 50 l/min flow rate, max. 175 bar, connections 1/2 inch female thread, pressure transfer 1/2 inch male thread.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1400 kg pulling force at 175 bar,The rope speed is 0.45 metres / second at 40 l/min.Large drum with 40 m 6 mm wire rope with hook.Complete set with hoses and HY plug,Electro-magnetic valve with professional radio unitpermanently wired with 7-pin vehicle plug.

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is released to be pulled out.The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield.Dimensions of the housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg pulling force at 175 bar,large drum with 35 meters of 8 mm wire rope with hook,The rope speed is 0.36 meters / second at 40 liters/min.Connections: 3/8?AG/ IG.

The light and compact auxiliary winch for mounting on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fasteners that can be easily mounted to your device. This crane winch is a robust construction and made for demanding use in the forest. Simply connect to a double-acting control device. Can be used for anything that needs to be pulled.Compact crane winch - easy and quick assembly.The maximum pulling force is a full 700 kg at a maximum of 175 bar.The rope speed is 1.2 meters / second at 40 liters/min.Connections: 3/8?AG/IG.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. The reduction is released to pull it out.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation, <~cbht />~Valve with built-in pressure transfer and extra return, <~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.<~cbht />~Dimensions of the winch housing: 40 x 25 x 20 cm. Can be used for anything that needs to be pulled.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes ! Max.1700 kg pulling force at 175 bar,The rope speed is 0.36 meters / second at 40 liters/min.large drum with 35 meters of 8 mm wire rope with hooks. Complete set with hoses and HY plug, electro-magnetic valve with professional radio unit >Fixed wired with 7-pin car plug.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. With freewheel for pulling out the rope.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer and extra return ,max. 40 liters/minute flow, max. 175 bar, connections 1/2 Zoll IG, pressure continuation 1/2 Zoll AG.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for everything What needs to be pulled can be used.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg tensile force at 175 bar,The rope speed is 0.29 meters / second at 40 liters/min.Large drum with 35 meters of 8 mm wire rope with hook.Complete set with hoses and HY plug,electro-magnetic valve withprofessional radio unitwith 7 -pin vehicle plug permanently wired.

The light and compact auxiliary winch with radio control, for installation on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fastening elements that can be easily attached to your device can be mounted.This crane winch is a robust construction and made for demanding use in the forest.It is operated via radio on a 12 V control valve with additional manual operation. Control valve: 12 volts Simply install solenoid valve into a hydraulic circuit<~cbht />~Valve with built-in pressure transfer and extra return,<~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.The maximum tensile force is a full 700 kg at a maximum of 175 bar.The rope speed is 1 .2 meters / second at 40 liters/min.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~ Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.Can be used for anything that needs to be pulled . Complete set with hoses and HY plug, electro-magnetic valvewithprofessional radio unitwith 7-pin car plug< /strong> permanently wired.

Electronic ignition coil suitable for Husqvarna chainsaws! ~Replica suitable for the Husqvarna models: ~36, 41, 136, 137, 141, 142 ~also suitable for Poulan 4618, 4620 and McCulloch 2818 ~Replaces original Husqvarna: 530 03 92-39, 545 06 39-01, 530039239, 545063901 ~(not an original part!)

​Electronic ignition coil suitable for Husqvarna chainsaws! Replica suitable for Husqvarna models:  Husqvarna: 120 MarkII, 235, 235E, 236, 236E, 240, 240E        Poulan 4618, 4620,                                            McCulloch 2818                                        replaces Husqvarna No. 575 80 35-01, 545 19 99-01, 530 03 91-43 (not an original part!)

Electronic ignition coil suitable for Husqvarna chainsaws! ~Replica suitable for the Husqvarna models: ~336, 338, 339, 340, 345, 346, 350, 353, 357, 359, 455, 460 , 461 ~also suitable for JONSERED models 2141, 2145, 2149, 2150, 2159, ~CS2135, CS2139, CS2141, CS2145, CS2147, CS2150, CS2152, CS2153, CS2156, CS2159, CS225 5 ~

​Ignition coil suitable for STIHL models: 009, 010, 011, 012, 020 (1114), 020 (1129), 020T (1129), 021, 023, 025, FR160, FR220, FS160, FS180, FS200, FS220, FS220K, FS280, FS280K, FS290, MS200, MS200T, MS210, MS210C, MS230, MS230C, MS240, MS250, MS250C, MS251, MS280, MS280K, MS290. Can be used instead of: 0000 400 1306, 0000-400-1306, 00004001306. Cable length from the coil to the spark plug connector: 195mm.

Electronic ignition coil suitable for Stihl machines!Replica suitable for the models:024, 026, 028, 029, 034, 036, 036QS, 038, 039, 044, 046, 048, 064, ~MS240, MS260, MS290, MS310, MS340, MS360, MS360C, MS380, MS381, MS390, MS440, MS640, ~FS360, FS420, FS420L ~Replaces original STIHL: 0000-400-1300, 1119-400-1308, 1122-400-1311, 00004001300, 11194001308, 1122400131

​Electronic ignition coil suitable for Stihl machines! Replica suitable for the models:FS: 120, 200, 250, 300, 350FR: 350, FR450,BT: 120, BT121,HT: 250,Replaces original STIHL: 4134 400 1301, 4134 400 1306, 41344001301, 41344001306, 4134-400-1306, 4134-400-1301

​Electronic ignition coil suitable for Stihl machines! Replica ignition module suitable for the models: FS 160, FS 180, FS 200, FS 220, FS 220K, FS 280, FS 290,  FR 160. FR 220,                                           SR 340, SR 420,                                           BR 340, BR 380, BR 420                                      Replaces original STIHL: 0000-400-1306, 00004001306, 4203-400-1301, 42034001301 ,ATTENTION: specific for brushcutters! NOT for chainsaws!Translated with DeepL.com (free version)

​This tester checks the function of the spark plug, ignition and solenoid coil ignition systems of chainsaws, lawnmowers, motorbikes and cars. The display is shown by two LED lights.Simply and quickly clamp between spark plug and plug! 

Handy LED inspection lamp with 3W COB and a power LED. With two light functions and a 3-way adjustable clip including magnet. Delivery includes 3 AAA batteries, total length 185 mm.

From planting to harvest-ready stock Whether you are a small forest owner or a large forestry entrepreneur - this book offers you practical instructions for successful forest management. The spectrum ranges from planting young trees to plant protection and forest care through to initial thinning and pruning. Read here what you need to do in a healthy and productive forest to make forestry worthwhile.

Pedal tractor with RollyJunior loader and rollyFarm trailer for children from approx. 3 to 8 years, adjustable seat with roll bar, opening hood, protected integral chain drive with adjustable pedal crank, silent running tires, extra stable 12 mm steel rear axle, can be retrofitted with functional accessories. Dimensions 210 x 53 x 62 cm

Birnenförmiger, leichter und kompakter Karabiner mit Schraubverschluss. Der kompakte ATTACHE-Karabiner mit SCREW-LOCK-Schraubverschluss ist für verschiedene Sicherungsvorgänge geeignet: Einhängen eines Sicherungsgerätes in einen Gurt, Sichern mit Halbmastwurf usw. Das H-Profil reduziert das Gewicht dieses sehr kompakten Karabiners und das Keylock-System verhindert, dass sich der Karabiner beim Ein-/Aushängen verhakt.Zertifizierungen: CE EN 12275 type H, UIAAProduktinfos:Material: AluminiumGewicht: 58 gBruchlast längs: 21 kNBruchlast quer: 7 kNBruchlast Schnapper offen: 6 kNÖffnung: 23 mm