Vehicle construction

For Multipoint I, with contact sockets and 2 grommets, including assembly instructions.

For converting from ball to plain bearings. The bearing ring is pushed onto the profile shaft and welded to the fork.

Suitable for Simol support foot DG590/706/3SF, outer diameter: 35 mm, bore: 13 mm, 15 teeth.

Triangular profile, fork attachment 1 3/8x6 with sliding pin, length = total length

Triangular profile, fork 1 3/8x6 with sliding pin, freewheel mounted on the device sideDirection of rotation right - use for e.g. Rear PTO shaft (PTO shaft stub running clockwise) Direction of rotation left - use for e.g. Front PTO shaft (PTO shaft stub left-hand running)

Triangular profile, slip-on fork 1 3/8x6 with sliding pin, freewheel mounted on the device side, e.g. for front PTO shaft

Triangular profile, attachment fork 1 3/8x6 with sliding pin

For trailers, flatbeds,... coarse-meshedMaterial PE, black, mesh size 30 x 30 mm, with elastic cord, incl. expander rope and PVC storage bag.TÜV SÜD certified

for eccentric lock 6043

20mm

Bore 12mm, length 99mm

Bore 12 mm, length 70 mm

Bolt with tab galvanized, there is an additional hole in the tab to secure the bolt against twisting or loss

High-quality bow handle made of plastic, PA thermoplastic (polyamide) glass fiber reinforced, temperature resistant up to 150 C, black, RAL 9005SW

Foldable, galvanized, hole spacing 30 mm.

Sheath 2300 mm long, 12 mm, rope 3800 mm long, 5 mm, incl. insert pocketReversible brake cable for vehicles up to a permissible total weight of 4000 kg, yellow chrome, tab cross section 51x10 mm.

Sheath 3500 mm long, 12 mm, rope 6200 mm long, 5 mm, including insert pocket, tab cross-section 51x10 mmReversible brake cable for vehicles up to a permissible total weight of 4000 kg, yellow chrome.

Sheath 2300 mm long, 12 mm, rope 5200 mm long, 5 mm, incl. insert pocketReversible brake cable for vehicles up to a permissible total weight of 4000 kg, yellow chrome, tab cross section 51x10 mm.

Galvanized cable pull, cable connection thread M8, sleeve length 1230 mm, cable length 1440 mm, bell outer dimension 22 mm

Brake hose for compressed air brake systems in motor vehicles and trailer vehicles. The compressed air hose is 100% pressure tested according to DIN 74310 and has a corded textile insert. The core and the top are made of black, smooth EPDM. The brake hose is very abrasion-resistant, resistant to aging and weather. Roll length 10m

For Steyr 80, M10x1.2 flat connector.

Closer, rest position "~Off"~

Switch for brake light or start safety 12/24V, 4 flat plugs,IP67, can be used instead of CNH: 82026949, 5163618, 47132449, Steyr: 321564850

PVC, 2 flat connectors, thread 12 mm, thread length 35 mm.