Hydraulic program

Hydraulic pumps and accessories

Filters, pressure gauges & tanks

Hydraulic motors & accessories

Control units & directional control valves

measuring connections

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#69840

Plunger cylinder piston rod Ø S = 30 mm, with ball joint Ø d = 20 mm Plunger cylinder piston rod Ø S = 30 mm, with ball joint Ø d = 20 mm

Installation length (EL) (mm): 333 Stroke (mm): 150

Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 30 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 1272 kg at 180 bar, connection M16x1.5, T = 38 nominal pressure 250bar.

Variants from €159.00*

€179.00*

#69849

Plunger cylinder piston rod Ø S = 40 mm, with ball joint Ø d = 20 mm Plunger cylinder piston rod Ø S = 40 mm, with ball joint Ø d = 20 mm

Installation length (EL) (mm): 338 Stroke (mm): 150

Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 40 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 2260 kg at 180 bar, connection M18x1.5, T = 38 mm, nominal pressure 250bar.

Variants from €219.00*

€219.00*

#FA114308

Pressure continuation bushing for DE50 valves, R1/2' Pressure continuation bushing for DE50 valves, R1/2'

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

€17.00*

#FA114309

Pressure continuation bushing for DE85 valves, R3/4' Pressure continuation bushing for DE85 valves, R3/4'

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

€17.00*

#FA118729

Pressure gauge box with 2 pressure gauges and accessories Pressure gauge box with 2 pressure gauges and accessories

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:1 piece pressure gauge 63mm 0-250bar, graduation 10bar1 piece pressure gauge 63mm 0-600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece pressure gauge direct connection with Minimess screw coupling1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread M10x1 AG with O-ring1 piece thread reduction 1/4?AG / M10x1 IT1 piece thread reduction 3/8?AG / M10x1 IT1 piece thread reduction 1/2?AG / M10x1 IT

€149.00*

#FA118728

Pressure gauge box with 6 pressure gauges and accessories Pressure gauge box with 6 pressure gauges and accessories

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:2 pieces of pressure gauge 63mm 0 - 60bar, graduation 1bar2 pieces of pressure gauge 63mm 0 - 250bar, graduation 10bar2 pieces of pressure gauge 63mm 0 - 600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece mini measuring hose 2m with measuring connection M16x21 piece pressure gauge connection for mini measuring hose 1 piece pressure gauge connection with Minimess screw coupling1 piece pressure gauge connection with union nut 12L (M18x1.5mm IT)1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread 1 /4?AG1 piece test connection M16x2 / screw-in thread 1/2?AG1 piece thread reduction 3/8?AG / 1/4?IG1 piece thread reduction 1/2?AG / 3/8?IG

€298.00*

#120729

OMT Pressure relief valve with cone seat valve Pressure relief valve with cone seat valve

A (mm): 40 B (mm): 55 C (mm): 30 D (mm): 61 Flow rate (l/min): 40 Pressure range (bar): 80 - 300 Standard setting (bar): 150 Thread: 3/8 Zoll

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat.

Variants from €39.00*

€39.00*

#120735

OMT Pressure relief valve with cone seat valve and pressure gauge connection Pressure relief valve with cone seat valve and pressure gauge connection

A (mm): 50 B (mm): 92 C (mm): 50 D (mm): 61 Flow rate (l/min): 90 Pressure range (bar): 50 - 250 Standard setting (bar): 120 Thread: 3/4 Zoll

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat. This version is equipped with a 1/4" pressure gauge connection.

Variants from €40.90*

€59.00*

#FA10007

Pressure transfer (carry over) to blb Pressure transfer (carry over) to blb

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump FAIE control valve with pressure transfer-auxiliary control unit-hoist.for control valves BM/BF40, GM08, R 1/2?

€18.50*

#FA113

Pressure transfer 3/4 Pressure transfer 3/4

€24.90*

#FA59001

Print forwarding to GM08 Print forwarding to GM08

Internal thread R1/2"~

€14.95*

#FA65010

Print forwarding to GM10 Print forwarding to GM10

Internal thread R1/2?

€17.90*

#FA38793

Profile sleeve 1 3/8' x 6 Profile sleeve 1 3/8' x 6

Bore 22 mm.

€79.90*

#FA37494

Profile sleeve 1 3/8' x 6 internal teeth Profile sleeve 1 3/8' x 6 internal teeth

For attaching to oil engines. Bore 25 mm, keyway 8mm, outer 49 mm, length 130 mm.

€49.90*

#FA38792

PTO shaft stub for outer bearing, 1 3/8 x 6" PTO shaft stub for outer bearing, 1 3/8 x 6"

Bore 22 mm. Total length 100mm.

€39.90*

#FA9433

PTO stub 1 3/8 x 6" PTO stub 1 3/8 x 6"

For attaching to oil engines. Bore diameter 25 mm, keyway 8 mm.

€24.95*

#379

OMT Pump carrier Pump carrier

E-motor power (kW): 5,5-9 Length (mm): 143 Pump Group: 3 Ø bolt circle (mm): 265 Ø flange (mm): 300

Used to attach the hydraulic pumps to the electric motor. Material: aluminum

Variants from €21.90*

€52.90*

#26862

Pump driver Pump driver

BG: 2 Groove width (mm): 4 mm Interlocking: A 25x22 Length (mm): 23 Number of teeth: 14

Connecting hub between hydraulic pump and gearbox or hydraulic pump and outer bearing.

Variants from €7.99*

€9.00*

#101989

Push-pull coupling sleeve with screw-in thread and O-ring Push-pull coupling sleeve with screw-in thread and O-ring

Thread: G1/2 Zoll BSP AG

With O-ring seal. For screwing directly onto Bosch additional control units SB23. Suitable for all tractor types with Bosch SB23 control units e.g. Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor.Can be coupled under pressure!

Variants from €59.90*

€69.90*

#FA20484

Push-pull coupling sleeve with screw-in thread M22x1.5 and ring socket Push-pull coupling sleeve with screw-in thread M22x1.5 and ring socket

For the additional installation of a ring eye with an inner diameter of 22 mm. The total length of the coupling including the connecting piece for the ring eye and the screw-in thread is 134.80mm.Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!

€72.90*

#FA129516

Push-pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L Push-pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L

Push-pull plug-in coupling suitable for Fendt SCR, S4 and Gen6 series.Length (without thread) L: 80 mmL1: 30 mmBulkhead thread 15LSize: BG 3Standard designation: ISO 7241-1 A

€99.00*

#FA125550

Push-Pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L Push-Pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L

Push-pull plug-in coupling suitable for Fendt with collar and O-ring groove for attaching the Fendt original oil leak housing.Length (without thread): 110mmExternal thread: M22x1.5 bulkhead thread 15L Size: BG 3Standard designation: ISO 7241-1 A

€79.90*

#FA53758

Indemar Pushbutton, normally open contact Pushbutton, normally open contact

The pushbutton is a normally open contact. This means that when the pushbutton is pressed, the circuit is closed and current can flow in the working circuit. The pushbutton has an installation thread M12x0.75mm. The maximum switching capacity is 8 A.Suitable for Faie handles no. 34623, 34624, 34625 and 22800

€17.90*

#FA101666

Faster PVC hose �8x11mm black PVC hose �8x11mm black

Oil-resistant PVC hose with an inner diameter of 8mm for leakage oil collection systems. Price unit is 1 meter.

€1.59*

Seite 23 von 29

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Hydraulic program

Press fittings

Hy. hoses, pipes, fittings

Hydraulic cylinder & top link

Hydraulics in general

Hydraulic power units

Couplings, ball valves,

Hydraulic valves

Hydraulic pumps and accessories

Filters, pressure gauges & tanks

Hydraulic brake

Transmission