Agricultural machinery

with 7 connections, for insertion hole 19mm

Number of contacts: 7 

Einbauöffnung: ø 27mm

4 switching positions with preheating, suitable for Lamborghini, Same, 40 mm, mounting hole 22 mm

Passend zu Massey Ferguson 135, 240

Passend zu Massey Ferguson MF35

Zündschloss passend zu John DeereAusführung: 5 Anschlüsse

Gear ratio 1:2, same direction of rotation, weight: 26 kgInputx: 540 rpm, 51.5 kW, 928 Nm, connection 1 3/8"x6 stubsOutput y: 1080 rpm, 460 Nm, connection 1 3/8"x6 inner profileIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Flat plug connection, silver-plated, BA9s socket for 2W light bulb. (without bulb)

For Steyr Plus. Installation dimensions: 210x20 mm (without lamp holder)

Multi-chamber light specifically for the Steyr Plus series. With reflector 207x120 mm, 2 screws M5x20 mm, distance 45 mm. For front installation.

Metal base plate with PVC ring, 2 holes for fastening with M5 screws, 45 mm hole spacing, 78 mm, suitable for e.g. Case IH, Claas, Deutz, Holder, Johne Deere, MF, ...

For mounting at the front, base plate made of impact-resistant plastic, cover glass with snap fastening, 2 holes M5, 70 mm hole spacing, can be used right/left, LxWxH: 170x75x64 mm, suitable for e.g. Case IH, John Deere, ...

Front attachment, 2 holes M4, hole spacing 104mm,LxWxH: 125x63x49mm,suitable for e.g. Class, Deutz, John Deere right/left

Metal housing, 2 M6 holes, hole spacing 45mmLxWxH: 110x57x45mm

44 mm, with indicators, horn, high/low beam.

15-pin connector

2 circuit indicator system, indicator light redInstallation : 26 mm Connections: 49a/R/L/54R/54F/L/C/C

left with license plate lighting, dimensions: 155x140mm, including bulbs, suitable for Case Series CS, CS Pro, CVX, Steyr Series 9000, 9100, CVT

right without license plate lighting, dimensions: 155x140mm, including bulbs, suitable for Case Series CS, CS Pro, CVX, Steyr Series 9000, 9100, CVT

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

Application: Area sprayingInjector nozzle with double flat jet, 110 spray angle each.Angle of 60 between the two spray jets directed forward and backwards.Drop size like long AI TeeJet, therefore very low drift from 1.5 to 4 bar , optimal pressure for the effect from 4 bar, drift reduction excellent.Good lateral attachment to upright target surfaces and intensive penetration of tiered foliage.Large, round cross-sections for liquid and air increase operational safety and minimize wear.Two outer and inner air intake holes, injector insert can be removed if necessary.Automatic alignment of the spray jets with Quick TeeJet cap Order No. 66757.When using the nozzle with a fastening cap from a manufacturer other than TeeJet pay attention to the orientation of the nozzle. The black dot on the nozzle must point in or against the direction of travel.

Application: Liquid fertilization, surface sprayingPlastic versionVery low drift at 2-4 bar, optimal pressure for the effect 4-8 bar, JKI loss-reducing, Very good drift reduction.Thanks to the injector principle and depending on the properties of the crop protection product, drops with air pockets are possible.Larger drops can burst on the target surface, smaller drops that are created improve the deposition.The AI nozzle mouthpiece pressed into the Quick TeeJet cap ensures automatic alignment of the spray jet.

Application: surface spraying, liquid fertilization110 spray angle, injector technology, especially designed for the low pressure area, flat jet spray pattern.Compact dimensions with a length of 22 mm reduce the risk of damage.The injector principle produces larger drops, depending on the preparation Air pockets are also possible.Removable injector insertPressure range from 1.0 to 6 bar, optimal pressure 2 to 3.5 bar.Drift reduction very good, reducing JKI lossesAutomatic alignment of the spray jet with Quick TeeJet cap Order No. 66756