Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Agricultural machinery


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-22 %
#FA34389
Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-27 %
-34 %
#FA25672
M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA47365
Blade holder suitable for BCS, VOGEL and NOOT Blade holder suitable for BCS, VOGEL and NOOT

For 4mm blades, without screw

€3.99*
#FA6537
Blade holder suitable for CLAAS Blade holder suitable for CLAAS

Blade holder suitable for Claas

€17.90*
#FA28002
Blade holder suitable for CLAAS, Krone, P�ttinger, PZ-Zweegers Blade holder suitable for CLAAS, Krone, P�ttinger, PZ-Zweegers

Blade holder suitable for Claas, Krone, Pttinger, PZ-Zweegers

From €14.85*
#FA2366
Blade holder suitable for Deutz-Fahr, Fort, Kuhn, P�ttinger Blade holder suitable for Deutz-Fahr, Fort, Kuhn, P�ttinger

Suitable for drum mowers for Deutz-Fahr, Fort, Kuhn, Pttinger

€15.99*
#FA32175
Blade holder suitable for FELLA Blade holder suitable for FELLA

Knife holder for Fella drum mower KM, length 185mm

€19.79*
#FA1971
Blade holder suitable for Fella, Niemeyer Blade holder suitable for Fella, Niemeyer

Blade holder suitable for Fella &~ Niemeyer, length 174mm

€20.50*
#FA43933
Blade holder suitable for M�RTL Blade holder suitable for M�RTL

Suitable for Mrtl disc mowers

€27.99*
#FA34315
Blade holder suitable for M�RTL Blade holder suitable for M�RTL

for driving mower drum inside

€32.50*
#FA55569
Blade holder suitable for P�ttinger Blade holder suitable for P�ttinger

Blade holder suitable for Pttinger NOVA CAT and NOVA DISC, length 195mm

€17.90*
#FA111303
Blade holder suitable for P�ttinger 434.125 Blade holder suitable for P�ttinger 434.125

€19.99*
#FA7907
Blade holder suitable for P�ttinger, PZ-Zweegers Blade holder suitable for P�ttinger, PZ-Zweegers

Blade holder suitable for Pttinger and PZ-Zweegers

€17.00*
#FA12166
ESM Blade instead of 344.0091, 51x73x2 mm Blade instead of 344.0091, 51x73x2 mm

Original ESM blade. The rivet holes have a countersink on the underside

€4.95*
#FA19098
ESM Blade instead of 344.1331, 51x74x2.5 mm Blade instead of 344.1331, 51x74x2.5 mm

Original ESM blade 3-hole with oval center hole. The rivet holes have a countersink on the underside.

€4.95*
#4169
Schröckenfux Blade N336, 80 x 76 x 2 mm Blade N336, 80 x 76 x 2 mm
Version: gezahnt

Blade N336 serrated, 80x76x2mm - wide Mrtl blade. This type of blade was installed on the medium-Rasant, high-Rasant and high-Florett mowers.

€1.35*
#7604
Schröckenfux Blade Phantom Blade Phantom
Version: gezahnt

€1.29*
#FA41921
Blade RS7500, 76x80x2 mm Blade RS7500, 76x80x2 mm

€1.19*
#5379
iQparts Blade share DU 40 S Blade share DU 40 S
Version: right

Variants from €62.90*
€62.90*
#5375
iQparts Blade share DU30 S Blade share DU30 S
Version: right

Variants from €57.90*
€57.90*
#5377
iQparts Blade share DU35 S Blade share DU35 S
Version: right

Variants from €59.90*
€59.90*
#FA75367
rasspe radura Blade suitable for Claas WM290F Blade suitable for Claas WM290F

rasspe radura original spare parts tested according to ISO 5718

€1.27*
#FA4737
ESM Blade with knob for bidux double knife mower Blade with knob for bidux double knife mower

Original blade with knob suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

From €6.21*
#FA7757
ESM Blade with knob for Busati's double knife mower Blade with knob for Busati's double knife mower

Original ESM blade with knob suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260. Made in Germany.

From €5.47*
#FA73801
Schröckenfux Blade, 5 holes Blade, 5 holes

83x76x2 mm, recessed at the top

From €1.52*
#FA73800
Schröckenfux Blade, 83x76x2 mm Blade, 83x76x2 mm

From €1.39*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.