Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Agricultural machinery


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-22 %
#FA34389
Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-27 %
-34 %
#FA25672
M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA53171
Blade bolt suitable for KUHN, P�TTINGER Garnier Blade bolt suitable for KUHN, P�TTINGER Garnier

complete with mother

€2.79*
#FA53172
Blade bolt suitable for NIEMEYER Blade bolt suitable for NIEMEYER

Blade bolt complete with screw and nut

€3.19*
#FA51905
Blade bolt suitable for P�TTINGER Blade bolt suitable for P�TTINGER

Delivery without mother! ~

From €2.24*
#FA27100
Blade bolt with screw suitable for BCS, Vogel Noot Blade bolt with screw suitable for BCS, Vogel Noot

Blade bolt complete with screw and nut

€3.99*
#41913
Schröckenfux Blade DIN 75 2 holes Blade DIN 75 2 holes
Version: gezahnt can be used instead of Aebi: AM8670/1, AM8670-1, AM8670.01, 100.6158, DIN75

75x76x2mm

Variants from €1.04*
From €1.04*
#FA23321
Schröckenfux Blade DIN 75 3 holes Blade DIN 75 3 holes

ML 5.5mm

€1.49*
#FA51241
Schröckenfux Blade DIN 75 3 holes Blade DIN 75 3 holes

ML 9mm

€1.49*
#FA12208
Schröckenfux Blade DIN 75 recessed at the bottom Blade DIN 75 recessed at the bottom

The rivet holes have a countersink on the underside.

€1.49*
#7498
Schröckenfux Blade DIN 80 2 holes Blade DIN 80 2 holes
Version: glatt

80x76x2mm

Variants from €1.01*
From €1.01*
#FA12168
Schröckenfux Blade DIN 80 3 holes, countersunk at the top Blade DIN 80 3 holes, countersunk at the top

Side hole right 11 mm

€1.75*
#FA52960
Schröckenfux Blade DIN 80 3 holes, ML 10 mm Blade DIN 80 3 holes, ML 10 mm

€1.54*
#23318
Schröckenfux Blade DIN 80 333a Blade DIN 80 333a
Version: gezahnt

3 hole, ML 9 mm

€1.49*
#FA40344
Schröckenfux Blade DIN 80 333b Blade DIN 80 333b

hole, ML 5.5mm

€1.49*
#FA41915
Schröckenfux Blade DIN 80 4 holes, ML 10 mm Blade DIN 80 4 holes, ML 10 mm

€1.49*
#FA41917
Schröckenfux Blade DIN 80 5 holes Blade DIN 80 5 holes

€1.59*
#FA7500
Schröckenfux Blade DIN 80 serrated, 2-holes, thickness 2,5mm Blade DIN 80 serrated, 2-holes, thickness 2,5mm

80x76x2.5mm

€1.59*
#FA16049
Schröckenfux Blade DIN 80, with recess Blade DIN 80, with recess

€1.29*
#FA4736
ESM Blade for bidux double knife mower Blade for bidux double knife mower

Original mower blade suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

From €3.49*
#FA7756
ESM Blade for Busati's double knife mower Blade for Busati's double knife mower

Original ESM blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Made in Germany.

From €2.84*
#7759
Schröckenfux Blade GB543 2 hole Blade GB543 2 hole
Version: gezahnt

€4.75*
#FA53052
ESM Blade guide plate right ESM 332.1320 suitable for double blade mowers Blade guide plate right ESM 332.1320 suitable for double blade mowers

Blade guide plate on the right suitable for Busatis and Busatis bidux double blade mowers for guiding the upper and lower blades in the area of the outer shoe

€11.70*
#FA49506
ESM Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470 Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470

Blade holder for lower knife guide arm for screwing. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM 1124, BM 1260. The through holes on the back of the bar should have a diameter of at least 10.1mm. If the knife holders to be replaced are riveted, then the hole diameter on the back of the beam is usually 9.20 to 9.50 mm.Please check the diameter of the holes on the back of the beam before ordering the version withscrews!

€61.90*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.