Agricultural machinery

Self-locking nut M16x2, strength 8.8

Suitable for Falc, Kuhn, Kverneland, Landsberg, Maletti, Maschio, Niemeyer, Rabe, Rau, Vogel &~ Noot

Hutmutter passend zu Lenkrad Massey Ferguson

Abmessungen (mm): 48x5

340 pieces, from 2.90 x 1.78 to 28.17 x 3.53 mm.

408 pieces, 3x2 to 50x3,5 mm, quality 70 shore. In the practical storage box.

425 pieces, 3x1.5 to 30.2x3 mm, quality 70 shore.

Position No. 47

Dimensions: 67x4mm

Dimensions: 78x2mm

Dimensions: 16.3x2.4mm

O-ring set for connecting DVS directional control valves. Consisting of 3 pieces of O-rings for 2-way valves and 6 pieces of O-rings for 3-way valves.

Suitable for Steyr

Suitable for Steyr with MWM engine

Sealing cap for oil filler neck without ventilationOn Steyr T190, T288, T290 also as a radiator cap for the filler neck ~

Suitable for Steyr: T80, T84

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.