Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA12197

ESM Bar blade smooth for leaf cutting bar, instead of ESM 321.0061 Bar blade smooth for leaf cutting bar, instead of ESM 321.0061

Bar blade with a smooth counter edge suitable for ESM leaf trimmers and Schanzlin vine trimmers. The blade has a length of 110 mm, a width of 70 mm and the hole spacing of the rivet holes is 51 mm. The blade is fastened to the back of the bar with 6x20 mm countersunk rivets.

€6.69*

#FA49088

Base 70x36x12mm for knife holder instead of BCS, Reform B563.51402.2 Base 70x36x12mm for knife holder instead of BCS, Reform B563.51402.2

Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.

€11.50*

#20122

Battery charger 200A Battery charger 200A

Color: rot

fully insulated

Variants from €14.95*

€14.95*

#20195

Battery charger 600A Battery charger 600A

Color: schwarz

fully insulated, with two cast inserts and ground strap

Variants from €22.95*

€22.95*

#48408

Battery clamp 10-50 mm� Battery clamp 10-50 mm�

Version: minus

Variants from €2.70*

€2.70*

#FA29098

Battery cover Steyr Plus series Battery cover Steyr Plus series

External dimensions 330x188 mm

€18.95*

#FA99361

Battery cover Steyr Plus series Battery cover Steyr Plus series

External dimensions 270x188 mm

€16.95*

#FA45528

Battery disconnect switch Battery disconnect switch

12 V/100 A, manual switch for switching + or - lines. Switching key can be removed in the off position, 2 connection screws for 8 mm cable lug, switching current 12/24 V = 100 A, switching current for short-term operation (5 seconds) 500 A.

€9.99*

#FA51576

Battery disconnect switch 12V/24V Battery disconnect switch 12V/24V

Switch lever can be removed in the off position, 2 connection screws for 10 mm cable lug, 250 A, short-term operation (5 seconds) 2500 A.

€19.95*

#FA108128

Battery lock MF Battery lock MF

Delivery: 1 pair

€32.95*

#FA156

Battery pole grease tube 50 g Battery pole grease tube 50 g

High-quality pole grease for secure contact and protection

Content: 0.05 kg (€145.00 / 1 kg)

€7.25*

#48404

Battery terminal 25 mm� Battery terminal 25 mm�

Version: plus

Variants from €3.85*

€3.85*

#FA110168

Battery terminal Plus screwable Battery terminal Plus screwable

Simple fixation using a double cable clamp, for cables up to 70 mm

€11.50*

#48597

Bayonet connection set 5-pin Bayonet connection set 5-pin

Color: gelb Version: left

For Multipoint I, with contact sockets and 2 grommets, including assembly instructions.

Variants from €6.25*

€6.25*

#FA16046

BCS double finger center cut suitable for 590.27624.5 BCS double finger center cut suitable for 590.27624.5

Double finger middle cut suitable for Aebi, BCS and Reform

€17.90*

#FA16050

BCS knife holder new suitable for 523.02824.0 BCS knife holder new suitable for 523.02824.0

Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.

€3.90*

#5303

iQparts Beak share 14 Beak share 14

Version: right can be used instead of Kverneland: 073002

without rotating interchangeable tip

Variants from €39.90*

€39.90*

#5306

iQparts Beak share, 16 Beak share, 16

Version: left can be used instead of Kverneland: 073005

without rotating interchangeable tip

Variants from €39.90*

€39.90*

#32367

Frank Original Beak share, 16 Beak share, 16

Version: right can be used instead of Kverneland: 073056

without rotating interchangeable tip

Variants from €45.00*

€45.00*

#68608

iQparts Beak share, 18 Beak share, 18

Version: right can be used instead of Kverneland: 073080

without rotating interchangeable tip

Variants from €47.90*

€47.90*

#FA100604

iQparts Beaked share SSP-350 W left suitable for Rabe Beaked share SSP-350 W left suitable for Rabe

Beaked share SSP-350 W suitable for Rabe plow bodies BP-330WS, BP-350 W and BP-350 WS. Hole spacing twice 120mm, spine length 470mm. Suitable plow screws with a square attachment for attaching the shares are Faie No. 1863.

€69.00*

#FA100602

iQparts Beaked share SSP-350 W right suitable for Rabe Beaked share SSP-350 W right suitable for Rabe

€69.00*

#43700

iQparts Beaked share SSP293-0 Beaked share SSP293-0

Version: left can be used instead of Rabe: 2700.1002, 2700.4802

Variants from €65.00*

€65.00*

#8065

Frank Original Beaked share, 14&quot Beaked share, 14&quot

Version: right can be used instead of Kverneland: 063014

without rotating interchangeable tip

Variants from €45.90*

€45.90*

Seite 10 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery