Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA24191

Ball joint M20x1.5 left Ball joint M20x1.5 left

External thread M20x1.5LCone 16.2 - 18.2 mm

€39.95*

#FA24197

Ball joint M22x1.5 left Ball joint M22x1.5 left

Cone 16.2 - 18.3 mm

€29.95*

#FA24192

Ball joint M22x1.5 right Ball joint M22x1.5 right

External thread M22x1.5 RCone 16.2 - 18.3 mmSuitable for Steyr: T190, 30, 430, 40, 540, 545, 548, 50, 650, 658 , 760, 768, Valtra: 900, 505, 605, 705, 805, Same: Explorer, RowCrop, Silver, Case: 433, 440, 533, 540, 553, 633, 640, 644, 654, 724, 733, 740, 744, 824, 833, 840, 844, 933, 940, 946, 1046, Deutz: Agrolux , Agroplus 60-100, Ford: 2810, 2910, 3910, 4110, 4600, 4610, David Brown: 990, 995, 996, 1290, 1390, 1490

€29.95*

#FA24200

Ball joint M24x1.5 left Ball joint M24x1.5 left

Cone 18.2 - 20.2 mm

€36.95*

#FA24198

Ball joint M24x1.5 right Ball joint M24x1.5 right

Cone 18.2 - 20.2 mm

€34.90*

#FA117987

Ball joint M24x1.5R cone 19.9-22.3 Ball joint M24x1.5R cone 19.9-22.3

Thread: M24x1.5RCone: 19.9-22.3mm

€55.00*

#FA118751

Ball joint M24x1.5R IT, 27.1-30.3mm Ball joint M24x1.5R IT, 27.1-30.3mm

Ball joint suitable for: 8060, 8065, 8070, 8075, 8080, 8090, 8100, 8110, 8120, 8130, 8140, 8160.

€132.00*

#FA118750

Ball joint M24x1.5R, 27.1-30.3mm Ball joint M24x1.5R, 27.1-30.3mm

Ball joint suitable for: 8060, 8065, 8070, 8075, 8080, 8090, 8100, 8110, 8120, 8130, 8140, 8160.

€99.00*

#FA19380

ESM Ball joint on the left Ball joint on the left

Thread M14x1.5, pin 19 mm.

€179.00*

#FA15212

ESM Ball joint on the right Ball joint on the right

Thread M14x1.5, pin 19 mm.

€179.00*

#FA24165

Ball joint suitable for Steyr Ball joint suitable for Steyr

External thread M18 x 1.5 RCone 12.7 - 14.5 mm

€36.90*

#111324

Ball pin M8 for Stabilus gas springs Ball pin M8 for Stabilus gas springs

Ø: 13

Length 29.5mm

Variants from €3.90*

€3.99*

#FA115446

Ball race steering gear for Steyr T80 Ball race steering gear for Steyr T80

Ball race for steering gear for Steyr T80, T84, T86, T180, T188

€79.95*

#FA27451

Ball ring Ball ring

Suitable for type 116, 316

€15.50*

#FA115443

Ball shell for shift lever for Steyr T188-T290 Ball shell for shift lever for Steyr T188-T290

Ball shell for shift lever for Steyr: T188, T190, T288, T290

€13.95*

#FA13756

Ball socket for 116, 316 Ball socket for 116, 316

Suitable for type 116, 316

€165.00*

#FA38461

Ball socket M8 for Stabilus gas spring Ball socket M8 for Stabilus gas spring

for 10mm ball pinscrew-in thread M8

€7.99*

#38281

Ball tilt bearing, � 45 mm, type 1000 Ball tilt bearing, � 45 mm, type 1000

Version: right

Up to 8 t total weight, use: in agricultural vehicle and light tipper construction for rear tippers or three-way tippers. With loose, replaceable Durethan shell.

Variants from €25.95*

€25.95*

#17694

Ball turntable JOST Ball turntable JOST

A (mm): 650 Axial load (t): 1,5 B (mm): 592 C (mm): 542 D (mm): 480 H (mm): 45 Type: 650 L

L = for agricultural vehicles and transport equipment up to 30 km/h, N = for heavy agricultural vehicles over 30 km/h, top quality, at a speed below 30 km/h the permissible axle load for TYPE N increases by 30 - 50%

Variants from €259.00*

€348.00*

#39329

Ball, black Ball, black

Nominal size: DN108 Size (inch): 4

Variants from €5.39*

€7.90*

#FA115488

Ball/gear lever Steyr Plus Ball/gear lever Steyr Plus

Ball/gear lever for Steyr Plus series:30, 43040, 540, 545, 54850, 650, 658, 760, 768

€3.99*

#FA70656

Ballast for LED lights (turn signals) Ballast for LED lights (turn signals)

10 ohms

€18.95*

#8666

banjo bolt banjo bolt

B (mm): 18 CH (mm): 27 I (mm): 38 L (mm): 48 Thread: 1/2 Zoll

Banjo screw for attaching ring eyes and ring soldering pieces

Variants from €1.35*

€3.29*

#FA15906

ESM Bar blade right/left Bar blade right/left

Suitable for ESM universal beams type 30 - 16.

€12.20*

Seite 9 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery