Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#27368

iQparts Beaked shares DU 435 S Beaked shares DU 435 S

Version: right

New series from 1989 with 4 hole mounting.

Variants from €54.90*

€54.90*

#27370

iQparts Beaked shares DU 440 S Beaked shares DU 440 S

Version: right

New series from 1989 with 4 hole mounting.

Variants from €59.90*

€59.90*

#FA12768

ESM Beam blade ESM 321.0041 Beam blade ESM 321.0041

€10.39*

#FA12771

ESM Beam blade Hobby beam instead of 321.1221 Beam blade Hobby beam instead of 321.1221

€3.85*

#FA52153

Bearing cap for six-disc bearing Bearing cap for six-disc bearing

€19.90*

#FA24726

bearing housing bearing housing

Suitable for Case and Steyr

€18.50*

#FA24722

bearing housing bearing housing

Suitable for Case and Steyr

€29.95*

#FA24764

bearing housing bearing housing

Suitable for Case, Steyr and New Holland

€14.50*

#FA7739

Bearing housing N78 suitable for mortar Bearing housing N78 suitable for mortar

The bearing housing N78 has an outside diameter of 77mm. The inner diameter is 62mm so that the deep groove ball bearing 6206 (Faie No. 16741) can be mounted.

€45.00*

#FA24777

Bearing housing, front/rear window Bearing housing, front/rear window

Suitable for Case, Steyr and New Holland

€24.90*

#6571

Bearing ring Walterscheid Bearing ring Walterscheid

D1 (mm): 23,9 Protection size: SC05

For converting from ball to plain bearings. The bearing ring is pushed onto the profile shaft and welded to the fork.

Variants from €24.50*

€24.50*

#FA117930

ESM Bearing shaft with right-hand thread M56x2mm, 300.0700 Bearing shaft with right-hand thread M56x2mm, 300.0700

Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.

€315.00*

#FA108033

Bellows air filter Bellows air filter

Inner diameter: 38mm

€4.90*

#FA4199

Belt rake tine instead of Reform 160.420.108, L=295mm Belt rake tine instead of Reform 160.420.108, L=295mm

Belt rake tine suitable for Reform single-axle machines and Metrac built up to 01.2004

€3.95*

#FA123712

Belt rake tine instead of Reform 160.420.109, L=280mm Belt rake tine instead of Reform 160.420.109, L=280mm

Belt rake tine suitable for Reform single-axle machines and Metrac built up to 01.2004

€3.95*

#FA7932

Belt rake tine instead of Reform MKW10.1.122, L=280mm Belt rake tine instead of Reform MKW10.1.122, L=280mm

Belt rake tine suitable for Reform Metrac and motor chain turning.

€5.59*

#FA71213

bevel gear to support foot bevel gear to support foot

Suitable for Simol support foot DG590/706/3SF, outer diameter: 35 mm, bore: 13 mm, 15 teeth.

€9.95*

#FA116094

ESM Bidux serrated blade, instead of ESM 344.0981 Bidux serrated blade, instead of ESM 344.0981

Original ESM Carbodux blade, serrated version

€8.60*

#FA29012

Schneider Big bag carrier arm with 2 hooks Big bag carrier arm with 2 hooks

With FEM 2 / ISO 2 mount for pallet fork carrier frame. With 2 carrier arms, a load of up to 1500 kg and a big bag size of up to 1000x1000 mm can be accommodated.Outreach: 900 mmWeight: 35 kgReception on pallet fork carrier: FEM 2 / ISO 2 Height fork carrier: 407 mm

€298.00*

#FA79754

Schneider Big bag carrier with EURO holder Big bag carrier with EURO holder

Load capacity 1500 kg when using all 4 hooks, for big bags 900x900 mm and 1000x1000 mm, color anthracite gray, dimensions (LxWxH): 1275x1050x860 mm, weight: 90 kg

€759.00*

#67470

Binacchi drive shaft, 1 3/8x6 Binacchi drive shaft, 1 3/8x6

Length (mm): 800 Power at 1000 rpm: 40 kW Power at 540 rpm: 26 kW Size: 4

Triangular profile, fork attachment 1 3/8x6 with sliding pin, length = total length

Variants from €119.90*

€119.90*

#68769

Binacchi drive shaft, 1 3/8x6 with freewheel RL1, clockwise Binacchi drive shaft, 1 3/8x6 with freewheel RL1, clockwise

Length (mm): 1073 Power at 1000 rpm: 74 kW Power at 540 rpm: 47 kW Size: 6 Torque (Nm): 2400

Triangular profile, fork 1 3/8x6 with sliding pin, freewheel mounted on the device sideDirection of rotation right - use for e.g. Rear PTO shaft (PTO shaft stub running clockwise) Direction of rotation left - use for e.g. Front PTO shaft (PTO shaft stub left-hand running)

Variants from €279.90*

€329.90*

#60800

Binacchi drive shaft, 1 3/8x6 with freewheel RL1, left-hand running Binacchi drive shaft, 1 3/8x6 with freewheel RL1, left-hand running

Length (mm): 1200 Power at 1000 rpm: 40 kW Power at 540 rpm: 26 kW Size: 4 Torque (Nm): 2400

Triangular profile, slip-on fork 1 3/8x6 with sliding pin, freewheel mounted on the device side, e.g. for front PTO shaft

Variants from €279.90*

€279.90*

#60803

Binacchi drive shaft, 1 3/8x6 with overload clutch Binacchi drive shaft, 1 3/8x6 with overload clutch

Length (mm): 1200 Power at 1000 rpm: 40 kW Power at 540 rpm: 26 kW Size: 4 Torque max. (Divers): 1200 Nm

Triangular profile, attachment fork 1 3/8x6 with sliding pin

Variants from €269.90*

€349.90*

Seite 11 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery