Products

suitable for DeLaval 960000-01, 22.5mm hole

4 pieces, suitable for GEA/Westfalia 7022-2725-150, 24mm hole

suitable for DeLaval 960001-01, 27mm hole

Immobilize injured teats with suppositories! The new udder suppository is based on the naturally occurring sebum of the teat canal and is therefore scientifically proven not to cause any harm. It contains no medicines and has no waiting period. The wax-like consistency adapts to the stroke channel. Sticking and scarring of the canal is prevented (pack of 6).

Suitable for InterPuls ?Classic? and ?Vanguard? milking clusters

Suitable for InterPuls ?Classic? milking cluster

​Helmet complete - The Husqvarna Technical forestry helmet with hearing protection weighs little and is nevertheless stable. It can be adjusted to an individual fit and has an innovative ventilation system. The visor has been designed to optimise visibility, whether folded or unfolded, and to provide better protection for the face. The helmet also has a recess for head torches. Hearing protection with FM radio is optionally available.Size 52 - 62, M/LHelmet model Husqvarna H300, EN 397Hearing protection attenuation value SNR 26 dB, EN 352Visor EN 1731

The ultimate two-component adhesive for professional use in modern hoof care. Practical disposable cartridge, 25 ml, for all those who do not want to work with large cartridges due to the low demand. The blue color immediately indicates the correct mixture when pressed. The new recipe has been optimized in terms of the parameters of curing speed, viscosity and degree of hardness after polymerization compared to the two-component adhesives available on the market. The glue becomes glass hard and adheres optimally to the claw and block, the flowability of the glue mixture has been adjusted so that it can be worked at both 45 and 90 angles, the claw is fully resilient again after approx. 2 minutes (at correct storage above 15 C), adheres strongly and permanently to wooden and rubber blocks. The 25 ml content is designed specifically for one-time use~ the matching mixer cannula is already integrated into the airtight packaging! Important: The adhesive should be stored under uniform conditions at approx. 15 - 20 C (summer and winter) to achieve an optimal result.

Inkl. Beschleuniger! Durch niedrige Außentemperaturen wird die Aushärtezeit des Klebers bei Klauenbehandlungssystemen mit Klötzchen oder Schuhen generell verzögert. Der Beschleuniger von Technovit bietet den einzigartigen Vorteil, diese sog. Polymerisationszeit bis zu 50 % zu verkürzen. Als Problemlösung in den kälteren Monaten! Der schnellhärtende Kunststoff Technovit 6091 ist durch seine besonderen Eigenschaften ein unentbehrliches Universalhilfsmittelin der Veterinärmedizin bei der Klauenpflege und Klauenbehandlung. In bestimmten Indikationsbereichen unterstützt Technovit 6091 die Therapie des Tierarztes und verkürzt die sonst oft langen Behandlungszeiten wesentlich. In der Klauen- und Hufbehandlung ergeben sich für Technovit 6091 vor allem folgende Anwendungsbereiche: Ruhigstellung von Klauen beientzündlichen Erkrankungen, Fixierung von Klauenspitzen, Abdeckung von Hufdefekten, Hornspalten, Formgebung des Hufes, orthopädische Hufbehandlung, besonders bei Fohlen (Bockhuf, Stelzfuß).Lieferumfang:320 g Pulver160 ml Flüssigkeit4 x Anrührbecher4 x Spatel4 x HolzklötzeBeschleunigerEmpfohlenes Mischverhältnis Beschleuniger : Flüssigkeit+5°C - 1 : 7+10°C - 1 : 10+20°C - 1 : 14

Incl. Accelerator!Low outside temperatures generally delay the curing time of the glue in hoof treatment systems with blocks or shoes. Technovit's accelerator offers the unique advantage of shortening this so-called polymerization time by up to 50%. As a solution to problems in the colder months!The fast-hardening plastic Technovit 6091, thanks to its special properties, is an indispensable universal aid in veterinary medicine for hoof care and hoof treatment. In certain indication areas, Technovit 6091 supports the veterinarian's therapy and significantly shortens the otherwise often long treatment times. In claw and hoof treatment, Technovit 6091 has the following areas of application: immobilization of claws in inflammatory diseases, fixation of claw tips, covering of hoof defects, horn gaps, shaping of the hoof, orthopedic hoof treatment, especially in foals (bock hoof, stilt foot).< br>Scope of delivery:1000 g powder500 ml liquid10 x mixing cups 10 x spatulas 10 x wooden blocks 70 ml accelerator Recommended mixing ratio accelerator : liquid+5C - 1 : 7+10C - 1 : 10+20C - 1 : 14< /li>

For using the Technovit 6091 hoof care items. 500ml

Suitable for approx. 10-12 treatments.

Accelerator for claw adhesive Technovit. Flat 70 ml

The fast 2-component PU adhesive for hoof treatment! With just a small amount of adhesive, you can attach wooden or rubber blocks to healthy hooves in seconds to relieve the diseased hoof after treatment and accelerate healing. Advantages: Dries within 30 seconds, adheres strongly and permanently to wooden and rubber blocks, easy to use – no mixing, no waste, odorless and safe to use even in closed rooms. Contents: 190 ml

​Refill set for Technovit-2-Bond.Consisting of: 1 x 2K adhesive cartridge 190 ml10 x mixing nozzles10 x wooden blocks

​The fast 2-component PU adhesive for hoof treatment! Technovit-2-Bond is a fast-drying two-component adhesive for hoof treatment. With just a small amount of adhesive, you can attach wooden or rubber blocks to healthy hooves in seconds to relieve the diseased hoof after treatment and accelerate healing. The advantages at a glance:Dries within 30 secondsStrong and permanent adhesion to wooden and rubber blocksEasy to use – no mixing, no wasteOdorless and safe to use, even indoorsThe practical Technovit-2-Bond set with dispensing gun includes accessories for approx. 10 applications (depending on claw size and application skill).1 x 190 ml cartridge with 2-component adhesive10 x mixing nozzles10 x wooden blocks1 x dispensing gunIt's so easy to use: Remove the cap from the cartridge and attach the mixing nozzle. Squeeze out a small amount of adhesive. This is necessary to ensure that the two components mix optimally. Now apply a bead of adhesive to the block. Quickly place the block on the previously prepared, clean, dry, healthy hoof. The adhesive hardens after approx. 30 seconds, and the hoof can be loaded again after approx. 2–3 minutes.

​FFP2 respirator mask for reliable protection against harmful dust, particles, and aerosols according to DIN EN 149.High wearing comfort thanks to the padded nose area and flexible nose clip.

Tedder tine suitable for Stoll "~Speed"~

Hay implement tine suitable for Stoll and JF.

Hot-dip galvanized version

Made from food-grade, naturally renewable raw materials. Polylactic acid obtained from sugar cane, reinforced with wood fibers. Organic, changeable and health-safe activity material. Long service life, biocompatible, biodegradable, GMO-free, selected, HACCP-compliant hardwood from certified, sustainable forest management. Suitable for fattening pigs, 7.5 cm, WITHOUT hanging chain.

Brass drinking nipples for bulls, sows and fattening pigs. Water flow can be regulated!Projection: 97 mmConnection: external threadWater output: 2.3 l/min at 5 barWeight: approx. 385 g