Products

Robust spreader for rough winter use. Equipped with composite frame and 35L PE container. Spreading width 1 -4 meters, 6 spreading levels for different spreading materials, adjustable spreading width limiter for precise work.

Stainless steel spreader with PE container. For use in private and commercial areas. Suitable for different scattering materials. Simple and quick assembly, robust construction, axles and frame made of stainless steel. Push rod adjustable in length and height in three ways, foldable support foot. Anti-compaction insert, greaseable axle bearing and wheel shutdown.

Universally applicable professional spreader for fertilizer, seeds, lime and road salt. Large 29 liter plastic container with standard cover, spreading width up to 3 meters. Stable metal rod for adjusting the dosage amount. Large pneumatic tires for good traction and optimal floor protection.

Compression springs:10 pieces - 5.5 x 17 mm10 pieces - 6.5 x 10 mm 10 pieces - 7.0 x 19 mm6 pieces - 9.5 x 16 mm10 pieces - 5.5 x 38 mm10 pcs. - 7 x 12.5 mm8 pcs. - 9.0 x 35 mm12 pcs. - 9.5 x 19 mm12 pcs. - 9.5 x 19 mm li>Equipment of tension springs:12 pieces - 4 x 79.5 mm10 pieces - 5 x 20.5 mm< /li>10 pcs. - 6.5 x 22 mm12 pcs. - 7.0 x51 mm10 pcs. - 8 x 31.5 mm< /li>8 pcs. - 4.5 x 44.5 mm10 pcs. - 5.5 x 25.5 mm10 pcs. - 7, 0 x 38.0 mm8 pcs. - 8.0 x 28.5 mm12 pcs. - 8.0 x 44.5 mm

For quick weight control, with robust carabiner hook. Measuring range up to 50 kg.

This TCN 9313 spring balancer with a load capacity of 2–3 kg and a 1.6 m stainless steel wire rope supports the automatic return of tools to their starting position. The die-cast aluminium housing and low-friction rope guidance enable consistent operation in industrial applications. Advantages & Functions • Die-cast aluminium housing – for industrial applications • Stainless steel wire rope Ø 2.0 mm – with 1.6 m rope length • Spring mechanism – automatic return of the tool to its starting position Frequently Asked Questions What load capacity is the spring balancer designed for? The working range is 2–3 kg load capacity. What is the rope length? The stainless steel wire rope has a length of 1.6 m. What applications is the spring balancer suitable for? The spring balancer is designed for industrial applications.

16.3 mm, 20 turns, for Steyr Plus

The spring compressor set with plastic protective inserts is ideal for assembling and dismantling the McPherson springs on the front and rear axles. A spacer is available for springs that taper in one direction. This means that small and large penholders can be used together. The spacer causes an offset of 30 mm. The plastic protective inserts prevent the spring coating from being accidentally scratched, thus reducing the risk of rust and the spring breaking again. The different pairs of spring holders with a diameter of 60 mm - 21.2 cm enable use on many types of vehicles such as BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi /strong> etc. The spring compressor has a maximum clamping force of 1500 kg, a working distance of 30 cm and is not suitable for impact wrench operation. for quick and professional removal and installation of spring struts< /li>suitable for most McPherson struts with conical and cylindrical springs

Simply bent, galvanized, in a practical economy pack.

The newly developed vintage car seat in the original design of the 60s with weight-adjustable suspension from 50 to 120 kg. The SPIRAMATIK NEW fits wherever the original  ~KLEPP SPIRAMATIK-SEAT ~ is or was mounted, especially on the following Steyr vintage tractors: Type T80, T84, T86, 180, 188, 280, 285, 290. The tractors thus retain their original appearance and maintain good suspension comfort.

17 mm, 16 turns, for Steyr Plus

​Replacement spring compatible with Felco 50 and 51 hoof shearsFelco original spare part no. 50/11

Feder für Ausrücklager passend zu Steyr Jubiläumsserie & Plus Serie

Suitable for Steyr Series Plus, 8000, 900, 9000, CVT~ Case series C, CS, CVX

Length: 65mm

Equipment:42 pieces - 2.1 x 25 mm25 pieces - 1.7 x 35 mm< li>20 pcs. - 3.1 x 40 mm30 pcs. - 1.7 x 30 mm25 pcs. - 2.5 x 35 mm 8 pieces - 3.7 x 60 mm

galvanized, DIN 127

Replacement plate made of spring steel, ~with barbs for better grip, ~Per piece.

​Ideal for bulls, dairy cows and suckler cowsThe two brushes in combination with the spring plates keep the animals busy as well as cleaning themHot-dip galvanized protective frame ensures greater durability of the bristlesMounting height depends on animal sizeFor attaching to the wall or housing (e.g. stable uprights)Dimensions 140 x 50 x 30 cm (LxWxD)Weight 41 kg

Springform pan with flat and tube base Black Metallic, sheet steel with non-stick coating/Teflon Classic, springform ring with groove embossing for extra stability, non-stick coating for easy demoulding, easy to clean by hand, 5 year guarantee, Made in Germany. Dimensions approx. 280x65mm.

​Reproduction clutch bell with drive pinion and needle bearing. Pitch 3/8 inch Hobby / Picco / LowProfile, 6 teeth, suitable for STIHL: 017, 018, 019, 019T, 021, 023, 025, MS170, MS180, MS190,MS191, MS192, 192CE, MS210, MS211, MS230, MS250,can be used instead of: 1143 640 2000Dimensions: Diameter 66 mm, drum height. 17.8 mm,Inner diameter of needle bearings 11.5 mm.