Products
Rotary rake tine suitable for Kuhn Giro rake series
Average rating of 5 out of 5 stars
High-quality reversible ratchet with additional angle screw function. Fine-toothed gear (52 Z) makes it easy to loosen or tighten in tight spaces. The screwing work is done quickly and easily by turning the handle.
Average rating of 5 out of 5 stars
Suitable for Steyr T80, 70 mm, with pre-heating function, 4 connections
90, galvanized, for rotating lights.
Average rating of 4.5 out of 5 stars
Flashing light with mounting base as an accessory for children's vehicles!
Color orange
Warning light with halogen lamp H1 12V/55W fixed mounting with flat base, protection class IP66, operating temperature -30C to 60C, certifications: ECE R10, ECE R65, height 160mm, diameter 140mm, over 10,000 operating hours, connection cable 200mm
Average rating of 5 out of 5 stars
Warning light with halogen lamp H1 12V/55W with magnetic fastening, spiral cable and plug, protection class IP66, operating temperature -30C to 60C, certifications: ECE R10, ECE R65, height 169mm, diameter 127mm, over 10,000 operating hours
Warning light with halogen lamp H1 12V/55W with flexible pipe socket mounting, protection class IP66, operating temperature -30C to 60C, certifications: ECE R10, ECE R65, height 240mm, diameter 127mm, over 10,000 operating hours
Average rating of 4.8 out of 5 stars
Compact, high-quality rotating beacon, total height only 220 mm, 110 mm, with flexible rubber base for pipe mounting. Break-proof hood made of polycarbonate with bayonet lock and unscrew protection. Incl. bulb H1.
Hardened steel parallel vice including turntable100 mm clamping jaws with milled teeth, with anvil,precise spindle guiderotatable
Average rating of 5 out of 5 stars
with 39.5mm shaft and 25mm bore, max. axial load 1.0 tons (static), 350 Nm at max. 250 bar, max. 300 bar for gripper close, max. 200 bar for gripper open, required oil flow 10 liters/ min., connection 1/4", endless rotation range, weight 11 kg.
Industrial rotator with a max. dynamic axial load capacity of 5 tons (static 10 tons) and max. 3.6 tons radial load!Max. Torque 1350 Nm,Connections M 18x1.5Weight 46 kg.
Double flange rotator with endless rotation range!Professional rotator for fixed mounting on crane tips or tilt devices - ~ ~without ~permissible radial load, may only be used hanging! ~ The upper flange of the rotator is designed as a 6-hole flange with a hole pattern of 132 mm.The lower flange of the rotator is designed as a 4-hole flange with a hole pattern of 100 x 100 mm.Torque delivers up to 900Nm at 25MPa.max. Axial load 3.0 tons (static),max. 300 bar for gripper closing,max. 200 bar for gripper opening,required oil flow 20 liters/min.,connection 3/8",weight 21 kg.
FAIE Rotator Professional rotator from Latvian production! Endless rotation range, for use on forwarding wagons, forwarding tongs, front loaders or similar. With protective bracket for the supply lines, without hoses. with 4-hole flange with 140 x 140 mm hole size, 17 mm bore, ~max. Axial load 3.0 tons (static), ~900 Nm torque at max. 250 bar, max. 300 bar for gripper closing, max. 200 bar for gripper opening, ~required oil flow 20 liters/min ., ~Connection 3/8", weight 20 kg.ATTENTION: Regularly check the Allen screw on the flange for tightness - retighten if necessary!
Average rating of 5 out of 5 stars
FAIE RotatorProfessional rotator from Latvian production!Endless rotation range, for use on forestry trailers, forwarding tongs, front loaders or similar. With protective bracket for the supply lines, without hoseswith 49.5mm shaft and 25mm bore, max. Axilla load 3.0 tons (static), 900 Nm at max. 250 bar, max. 300 bar for gripper closing, max. 200 bar for gripper opening, required oil flow 20 liters/min., connection 3/8", weight 20 kg.
Professional rotator from Latvian production!Endless rotation range, for use on forestry trailers, forwarding tongs, front loaders or similar. With protective bracket for the supply lines, without hoses.with 59.0mm shaft and 30mm bore, max. axial load 4.5 tons (static), 1050 Nm at max. 250 bar, max. 300 bar for gripper closing, max . 200 bar for gripper opening, required oil flow 20 liters/min., connection 3/8", weight 25 kg.
Professional rotator from Latvian production!Endless rotation range, for use on forwarding wagons, forwarding tongs, front loaders or similar. With protective bracket for the supply lines, without hoses. with 4-hole flange with 140 x 140 mm hole size, 17 mm bore, ~ max. Axial load 4.5 tons (static), ~ 1050 Nm torque at max. 250 bar, ~ max. 300 bar for closing the gripper, max. 200 bar for opening the gripper, ~required oil flow 20 liters/min., ~connection 3/8", weight 25 kg.ATTENTION: Regularly check the Allen screw on the flange for tightness - tighten if necessary!
Professional rotator manufactured in Latvia!Endless rotation range, for use on forwarding trailers, forwarding tongs, front loaders or similar.The large protective plate provides perfect protection for the supply lines, without hoses.With 69.0 mm shaft and 30 mm bore, max. axial load 5.5 tonnes (static), 1300 Nm at max. 250 bar, max. 300 bar for closing grapple, max. 200 bar for opening grapple,required oil flow 22 litres/min,connection 3/8 inch BSP AG,weight 29 kg.For use in forestry, agriculture, road construction and building construction, as well as in the field of general cargo and material transport.
This FHR 6FD1 hydraulic rotator, featuring a vane-type hydraulic motor, enables the controlled rotation of grapples and attachments in forestry, agriculture, materials handling, and road and building construction. The upper mounting is designed as a fork type with a fork width of 80 mm and a pin diameter of 35 mm. The lower mounting is via a flange with a diameter of 173 mm and six 17 mm mounting holes. The torque is up to 1850 Nm at 25 MPa, the weight is 45 kg and the recommended oil flow is 25 l/min. Advantages & Features • Fork mounting 80 mm / 35 mm bolt for connection to suitable pendulum links and articulation systems • Flange mounting Ø 173 mm with 6 x 17 mm holes for direct mounting on grippers or tools • Hydraulic connections 1/2" BSP, rotational pressure up to 250 bar, grapple closing pressure up to 300 bar for demanding applications Frequently Asked Questions For which applications is the rotator suitable? The FHR 6FD1 is suitable for forestry, agriculture, material handling, as well as road and construction applications. What loads can the rotator handle? The static tensile load is 60 kN, the static compressive load is 50 kN. The dynamic tensile load is 30 kN and the dynamic compressive load is 25 kN.
