Products
Average rating of 5 out of 5 stars
robust, hot-dip galvanized design
Particularly suitable for attachment to the front PTO shaft to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The transmission is mounted on the tractor side.Input Y:PTO shaft stub or internal toothing540/1000 rpm, 26.4/51.5 kW, 477/928 NmConnection 1 3/8x6, internal or external toothingPossibility with through drive 1:1 (direction of rotation constant).Output X:284/ 526 rpm, 482/895 NmConnection 1 3/8x6 external toothingReversal of direction of rotationIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
Especially suitable for the front PTO to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The gearbox is installed on the device side.Input Y:540/1000 rpm26.4/39.7 kW 477/386 NmConnection 1 3/8x6Output X:284/526 rpm895/725 NmConnection 1 3/8x6 inner profile Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same). In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
The 95000 series reduction gearbox is a compact gearbox designed for use with hydraulic motors. The gearbox has a reduction ratio of 2:1, which means that the speed at the output of the gearbox is 2 times slower than the speed at the input. The direction of rotation of the output shaft is the reverse of the direction of rotation of the input shaft (viewed at the visible shaft end). The gearbox is equipped with a robust aluminium housing. The input side has a bore with a diameter of 25 mm and a keyway of 8 mm. The connecting flange is suitable for oil motors with an SAE-A flange.The output side is a hollow shaft with a diameter of 35 mm and a keyway of 10 mm. Four M10 holes with a bolt circle diameter of 110 mm are arranged on the output side for fastening the gearbox. Please fill up and check the oil level before commissioning the gearbox. The maximum power transmission is 10 kW.Compact and robust High-quality workmanship High torque Long service life Universal application possibilities
The 96071 series reduction gearbox is a compact gearbox designed for use with hydraulic motors. The gearbox has a reduction ratio of 3:1, which means that the speed at the output of the gearbox is 3 times slower than the speed at the input. The direction of rotation of the output shaft is the reverse of the direction of rotation of the input shaft (viewed at the visible shaft end). The gearbox is equipped with a robust aluminium housing. The input side has a bore with a diameter of 25 mm and a keyway of 8 mm. The connecting flange is suitable for oil motors with an SAE-A flange.The output side is a hollow shaft with a diameter of 35 mm and a keyway of 10 mm. Four M12 holes with a bolt circle diameter of 110 mm are arranged on the output side for fastening the gearbox. Please fill up and check the oil level before commissioning the gearbox. The maximum power transmission is 20 kW.Compact and robust High-quality workmanship High torque Long service life Universal application possibilities
Made of brass, with cone connection
Made of brass
Rohrfitting nach ISO M4, verzinkt
Rohrfitting nach ISO M2, verzinkt
Three-Blade Reed Scythe Reed scythe for removing aquatic plants in ponds, ditches, and rivers, featuring a three-blade design made of forged scythe steel for precise and even cuts underwater. The flexible connection between the blade sections allows for optimal adaptation to the bottom of the water and facilitates effective weeding even in dense vegetation. Advantages & Features • Three-section construction made of robust scythe steel – high stability and long service life • Flexible screw connections and pull eyes – easy assembly and versatile mounting options • Universally suitable for ponds, ditches, and rivers – efficient removal of aquatic plants and reeds The reed scythe comes with connecting screws and sturdy pull eyes and is ready for immediate use. To ensure a consistent cutting depth, the use of additional weighting materials is recommended. Operation requires two people who pull the device jerkily against the direction of flow to ensure a clean cut along the bottom of the waterway. FAQ How many people are needed to operate it? Two people are required for safe and effective operation. Is the Reed Cutter ready for immediate use? Yes, the cutter comes complete with connecting bolts and pull eyes. Can the blade be resharpened? Yes, the knife blades can be sharpened regularly by honing or whetting.
The Reed Sensor is a milk flow indicator and suitable for DeLaval Reed Relay 984482-01.3 meter cable length.
Average rating of 4.25 out of 5 stars
Light, handy, break-proof and weather-resistant. For plastic strands and tapes, the drum can be locked~ suitable for approx. 500 m of strand.
With metal instead of plastic hooks for permanent electrification. Light, handy, break-proof and weather-resistant. For plastic strands and tapes, drum can be locked, for approx. 500 m of strand.
Average rating of 4.5 out of 5 stars
The wet udder wipes are ideal for efficient and quick cleaning of the teats before milking. The wipes are enriched with nourishing substances and shorten the milking time, while at the same time stimulating the milk flow. The top quality ensures optimum hand cleaning for the milker. The closable dispensing opening ensures that hygiene is guaranteed right down to the last wipe. The refill pack contains 1000 pieces.
for wasp trap No. 119699. 2 x 125 ml. Ingredients: food flavors.
Average rating of 3 out of 5 stars
Refill pack with bag and attractant for the reusable fly trap standard 8 l XL (order no. 45027). 2 pieces/pack.InfoXgen listed!
52x12cm
Average rating of 4 out of 5 stars
With screw M5.
Average rating of 4.41 out of 5 stars
With screw hole 6 mm.
Average rating of 2.5 out of 5 stars
With screw hole 6 mm.
With screw M5.
for gluing, 60x40mm
More visibility in the dark on all four horse legs! Two reflective neon yellow stripes each ensure you can be seen better. The reflective bandages can be easily used thanks to two Velcro straps.
This Reform landing net frame, made entirely of galvanized steel with a polyamide net attached, enables safe and efficient landing of fish in a variety of applications. The combination of a sturdy frame and a durable nylon net ensures high load-bearing capacity and a long service life even with regular use. Advantages & Features • Galvanized steel frame – ensures high stability and corrosion resistance during frequent use. • Polyamide net (nylon) – durable and suitable for professional use. • Delivered fully assembled – ready for immediate use without additional assembly effort. FAQ What frame widths are available? The Reform landing net frame is available in various widths from 30 to 75 cm. What mesh sizes are available? Depending on the model, nets with mesh sizes ranging from 4 to 20 mm are available. Is a wooden handle included in the package? No, the landing net handle is delivered without a wooden handle.
