Products

The high-quality table cutter Made in Germany is made entirely of stainless steel and is ideal for processing, chopping and mixing various foods such as sausage. Technical details: Set of 3 knives, 2-speed version (approx. 4,260/8,520 cuts per minute), 11 liter bowl with freewheel for easy and safe emptying and cleaning, bowl speed 14 rpm), two separate drive motors for bowl and knife shaft, incl . analog thermometer. ~Technical data: ~400 volts, plug 16A1.5 kW, weight 60 kg, external dimensions 820 x 510 x 415 mm (LxWxH) footprint 670 x 370 mm (LxW)Area of application: ~Direct marketing, butcher shop, catering. A plastic drying lid is optionally available as an accessory (This must be taken into account when ordering and cannot be retrofitted)

The high-quality table cutter Made in Germany is made entirely of stainless steel and is ideal for processing, chopping and mixing various foods such as sausage. Technical details: Set of 3 knives, 2-speed version (approx. 4,260/8,520 cuts per minute), 11 liter bowl with freewheel for easy and safe emptying and cleaning, bowl speed 14 rpm), two separate drive motors for bowl and knife shaft, incl . analog thermometer and PE lidTechnical data: ~400 volts, plug 16A1.5 kW, weight 60 kg, external dimensions 820 x 510 x 415 mm (LxWxH) footprint 670 x 370 mm (LxW)Area of application: ~Direct marketing, butcher shop, catering.

High-quality work trousers with stretchy waistband for optimal freedom of movement, fly with YKK metal zip, hand pockets in fashionable jeans shape, 3M reflector yoke on front trousers and back trousers, spacious side pocket with CORDURA bellows, flap and PRYM press stud fastener, mobile phone pocket with flap, 2 large back pockets with side compartment, hard-wearing, pre-shaped CORDURA knee pockets for the use of knee pads, CORDURA reinforced ruler pocket with pencil compartmentsMaterial: 65% polyester, 35% cotton. 270g/m blended fabric. Size: 46 - 60.

Wheel cross with forged center piece for tough cases! Sizes: 27x30x32x3/4 inch - square, leg length 37 cm. Ideal for use in agriculture or in the truck sector.

Commercial current tester with slot 3x60mm and total length 140mm with round blade.With WIHA Soft Finish handle made of transparent, impact-resistant plastic and blade made of high-quality chrome vanadium-molybdenum steel, hardened throughout, nickel coated, protective insulation sprayed directly onto the blade.Measuring range 110-250V against earth potential, so can be used worldwide! With metal clip

Forestry grab with open tongs for precise work, offers more precision and efficiency, especially when loading. The reinforced tips make it ideal as a brush gripper and for wood chip production, as almost no soil or dirt is lifted. Including mounted locking block on the cylinder: serves as a safety valve in the event of a hose break and relieves the load on the control valve!

Forestry grab with open tongs for precise work, offers more precision and efficiency, especially when loading. The reinforced tips make it ideal as a brush gripper and for wood chip production, as almost no soil or dirt is lifted. Including mounted locking block on the cylinder: serves as a safety valve in the event of a hose break and relieves the load on the control valve!

Hand-crank rotary pump for low-viscosity, non-flammable liquids such as diesel, heating oil, transmission and hydraulic oil, engine oil, etc. The pump is made of aluminum and steel and features high-quality NBR seals. Thanks to its high-quality construction, it can deliver up to 1 L per revolution (up to 100 L/min). This makes it ideal for refueling vehicles on site when no power source is available. Technical specifications: Immersion tube length 1,080 mm, immersion tube diameter 32 mm, foot strainer diameter 52 mm, self-priming, delivery head up to 15 m. The pump is supplied complete with a G2" drum fitting, mineral oil-resistant hose, and discharge elbow.

This automatic feeder with a mechanical clockwork mechanism enables continuous, even feed dispensing without the need for an electrical connection and supports the healthy growth of fish larvae and fry.After a single manual winding, the feeder operates reliably for 12 or 24 hours, ensuring uninterrupted feeding. The rot-proof aluminum shaft is specifically designed for use in humid environments such as recirculating systems or hatcheries. Thanks to the removable shaft with spring pins, the system can be quickly cleaned and flexibly adjusted to different feeding intervals.Advantages & Features• Mechanical movement → self-contained operation → no power supply required• Aluminum shaft → corrosion- and rot-resistant → ideal for high humidity• Removable shaft with spring pins → quick cleaning → low-maintenance operationFAQHow long does the feeder run?Depending on the model, up to 12 or 24 hours after manual winding.What types of food are suitable?Powdered food, granules, and pellets can be used without any problems.Is the feeder suitable for humid environments?Yes, the aluminum shaft is specifically designed for use in high humidity.

​Highly stable dustpan for a long service life made of hardened sheet steel. Shovel dimensions (without handle) 23 x 27 cm (WxL)

Dimensions: 140x150x5 mm

Dimensions: 280x290x5

Selling only full meters1 3/8 x 6

Anschlusswelle für Gelenkwelle, Zapfwelle

Anschlusswelle für Gelenkwelle, Zapfwelle

Length 57 mm, 1 1/8x6 -1 3/8x6.

Length 76 mm, 1 1/8x6 - 1 3/8x6.

Length 100 mm, outer 60 mm (without holes)

Bore 22 mm.

For attaching to oil engines. Bore 25 mm, keyway 8mm, outer 49 mm, length 130 mm.

2 holes

Length 80 mm, outer 48 mm

Fixed length 1000 mm

Fixed length: 1000mm