Products

This regulator enables pressure and flow control and regulation through the Colombo 6 and 12 filters. It is installed between the pump and the inlet hose to the filter layers.By reducing the pressure and quantity, direct filling can be made possible, for example. Connection thread 3/4?IG / grommet 20 mm.

Stainless steel pressure barrel, stainless steel riser pipe with dispenser and stainless steel ball valve with plastic outlet elbow. Screw connection with pressure gauge, safety valve and blind plug for gas connection valve. 395 mm, height 532 mm. With this versatile barrel you can ~ You can store up to 50 liters of your own ~ Making drinks for months ~ keep it fresh and tap it conveniently every day - without heating and without ~ Addition of chemical preservatives. ~Sweet cider or cider With any high alcohol content from apples, pears, berries or ~ Grapes. You can determine the alcohol content yourself: ~ The shorter the barrel remains open after filling, the less fermentation, the lower the ~ Alcohol content (max. 10 bar through fermentation). Low-alcohol sweet cider made from apples, pears, berries, etc. Almost alcohol-free thanks to the addition of carbon dioxide: low secondary fermentation, freshness for months (max. 10 bar). Fermented drinks Wine, cider, beer, sparkling wine can be tapped fresh like in a pub: just 0.5 to 1 bar of carbon dioxide keeps the drink fresh for months and provides the necessary pressure when tapping. In wine, carbon dioxide prevents excessive sulfurization.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

for PTO pump No. 47451

Attachment set with 1"~ Connections for ZWP 111. For continuous regulation of pressure and flow rate during cleaning and rinsing work. Absolutely necessary if, for example, water extraction is stopped without turning off the pump during casting work.

The KELOMAT pressure cooker has been combining modern, healthy and time-saving cooking with timeless elegance for decades. Even with the two-piece Alfa pressure cooker set, dishes that normally take a long time to simmer can be prepared in a flash. The extreme pressure inside the pressure cooker speeds up the cooking time and saves energy. Despite the cooking time being reduced by up to 70%, the food is not leached out in the steam: thanks to the short cooking and heat time, aromas, flavors and, above all, valuable vitamins and minerals are better preserved. This makes the pressure cooker ideal for an energy-saving, gentle and healthy diet. Whether vegetables, meat, fish, grains or legumes - the pressure cooker is suitable for most dishes.The Alfa pressure cooker set includes a pressure cooker and a pressure frying pan. Also included is a matching pressure lid for both sizes. All parts are made of high quality stainless steel. The pressure frying pan can also be used for regular frying of meat and vegetables. Handling the cookware is made easier by the ergonomically shaped insulated handles and the safety window in the edge of the lid. The pressure cooker is particularly easy to use thanks to the pressure control valve with 2 cooking levels and the exhaust steam valve. The heat is conducted quickly thanks to the thermal sandwich base. Two-piece pressure cooker set AlfaThe advantages of KELOMAT Alfa at a glance:Pressure cooker (22 cm) with 6.0 L capacityPressure frying pan (22 cm ) with 3.0 L capacityPressure lid suitable for both pressure cooker and pressure frying panMade of high-quality 18/10 stainless steel with internal scaleSuitable for all types of stoves ( Electric/gas/glass ceramic/induction)Thermal sandwich base with the best heat properties for energy-saving cookingPot handle with locking slide for easy opening and closingEasy to use pressure control valve with 2 Cooking levels (gentle, quick setting) and evaporation positionParticularly safe to use thanks to safety valve, handles with flame protection andSafety window in the edge of the lidCompression level indicator with silicone cap - protects against contamination Pot (without lid) dishwasher safe Steam insert and Rostals accessories available as well as spare parts

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:1 piece pressure gauge 63mm 0-250bar, graduation 10bar1 piece pressure gauge 63mm 0-600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece pressure gauge direct connection with Minimess screw coupling1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread M10x1 AG with O-ring1 piece thread reduction 1/4?AG / M10x1 IT1 piece thread reduction 3/8?AG / M10x1 IT1 piece thread reduction 1/2?AG / M10x1 IT

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:2 pieces of pressure gauge 63mm 0 - 60bar, graduation 1bar2 pieces of pressure gauge 63mm 0 - 250bar, graduation 10bar2 pieces of pressure gauge 63mm 0 - 600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece mini measuring hose 2m with measuring connection M16x21 piece pressure gauge connection for mini measuring hose 1 piece pressure gauge connection with Minimess screw coupling1 piece pressure gauge connection with union nut 12L (M18x1.5mm IT)1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread 1 /4?AG1 piece test connection M16x2 / screw-in thread 1/2?AG1 piece thread reduction 3/8?AG / 1/4?IG1 piece thread reduction 1/2?AG / 3/8?IG

0 to 25 bar, 60 mm, thread connection 1/4?.

Type RF, bar 0 to 10, 60 mm, thread connection 1/4?.

With this atomizer made of high-quality polyethylene you can also work overhead. ~for various chemicals such as detergents, solvents and cleaning agents etc.unsuitable for brake cleaners Spray head made of brass, adjustable and lockable Seals made of Viton Suitable for overhead work

With 2x internal thread and pressure gauge. Push-pull design to fix the set value. For pipe installation, compressors, etc. Includes pressure gauge, display up to 16bar, approved for 12bar.

High-quality pressure reducer in the best Fronius quality for argon and Co2. Adjustable from 3-30l/min - precisely adjustable, keeps the output pressure constant during the welding process.Robust housing with low weight, shut-off valve runs smoothly, up to 200bar inlet pressure.

Suitable for pressure drum 50 liters, for ARGON/Co2 working pressure 230/10 bar

Oxygen pressure reducer for fish transportThis high-quality oxygen pressure reducer has been specially developed for use in demanding conditions, such as low flow rates. It ensures stable, safe pressure control, making it ideal for fish transport and use in aquaculture.Equipped with a content pressure gauge and a working pressure gauge for precise control of the oxygen pressure. An integrated shut-off valve allows easy opening and closing of the gas flow.Features:Pressure reducer for oxygen applicationsWith content and working pressure gaugeRobust design for mobile useShut-off valve for safe handlingReliable even at low flow rates

Oxygen pressure reducer for fish transportation and aquacultureThis pressure reducer ensures a safe and controlled oxygen supply for fish during transportation and farming.Maximum inlet pressure: up to 200 barFinely adjustable outlet pressure: 0 to 10 barMaximum flow rate: 50 m³/hThe robust design and reliable control technology ensure a constant supply of oxygen.Ideal for use in oxygen systems on transport vehicles, basins or tanks.

TeeJet pressure reducer &~ Control valve model 23120 made of plastic with spring made of stainless steel 302 and EPDM seal. The regulation takes place via a bypass. Any pressure can be set within the pressure range specified for the respective valve. Once selected, the pressure is secured by the lock nut. Particularly large passage cross-sections minimize flow resistance.Inlet 3/4"~ Male thread, output 3/4"~ Internal thread, pressure gauge connection 1/4"~ Internal thread.Setting range: 0 - 10 bar

50 mbar R 1/4? for gas.

Pressure regulator without pressure gauge for universal syringe 120088

TV tested, setting range: 0.3 to 1.5 bar

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat.