Products

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

Plug, external thread, lightweight series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

with cable for standard blade fuse max. 30 amps

For flat and V-belt pulleys. 50 mm stiz for pulley, 3-hole flange with 70 mm bolt circle. Diameter refers to shaft . From shaft 35 mm - disc min. 130 mm.

Version: for plugging

Connectors are used to connect pieces of pipe, but not fittings. Weight: 0.2kg

Occurrence: plums, plums and mirabelle plums ~Main symptoms:Drilling of the fruits by the larvaA "rubber drop" is often present at the drill holeFructus around the core housing is destroyedFruit becomes unripe and falls off prematurely Biology: ~The larva hibernates in a cocoon under bark scales, rarely also in the ground. The first butterflies appear in May and lay their eggs individually on the fruits. The hatched larvae bore into the fruits and later leave them to pupate in the trunk.At the end of July, the second generation butterflies appear and deposit their eggs on the already ripening fruits. The resulting larvae bore into the fruit again and cause massive damage to the harvest. They overwinter in a cocoon. ~Egg laying: Females lay approx. 40-60 eggs ~Development time from egg to larva: around 10-14 days ~Main flight season: May and August (usually in the evening hours)Application: ~Assemble the trap and attach it with the included wire depending on the area of use. (The exact assembly instructions and the area of use are described in detail for each pheromone trap.) ~In order not to attract the pest directly to the crops to be protected, the trap should be hung in another nearby tree, for example. If this is not possible, the trap can be attached to a stake. Hang the trap between the main wind direction and the tree, at eye level. The trap entrances must not be blocked by branches and leaves. ~Each trap should be checked at regular intervals of 2-3 days. Whenever the trap is checked, the glue base must be cleaned of adhering insects using an auxiliary instrument (e.g. twig, wooden spatula) if necessary so that the full glue surface is retained. If it is heavily soiled, replace the glue base or re-glue it with Soveurode special glue (spray glue). ~Replace the attractant stubble and, if necessary, the glue base after 4-8 weeks.The traps must be hung up before the butterfly begins to fly. ~A trap set consists of: ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~  ~ ~ ~ ~ ~1 trap body (WitaTrap Delta Super trap large) ~2 glue bases (packaged separately) ~ ~ ~ ~ ~ ~ ~ ~  ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~2 pheromone stubbles (packaged separately) ~ ~ ~ ~ ~ ~ ~ ~ ~  ~ ~ ~ ~Hanging wire for assembly and a detailed description.

Made of stainless steel with elastic band for secure closure.

​Coring mirabelle plums, prunes or damsons is child's play? No problem: with the corer from Leifheit, you can remove the stones from these fruits in no time at all. Particularly practical: the plum corer fans out the flesh at the same time. This makes the pitted fruit perfect for decorating cakes or desserts. The sharp stainless steel blade removes the pit easily and cleanly from the plums. The pulp falls directly into a bowl provided, while the pits are collected in the drip tray. Four rubber feet ensure high stability. To pit mirabelle plums / Kriecherl, simply turn the pusher over. After use, the appliance can be rinsed quickly and easily under running water. For automatic, quick and easy coring of plums, mirabelle plums and other fruit.Cored fruit is perfect for decorating cakes as the flesh is fanned outStainless steel blade removes the core cleanly and easilyFruit pulp falls directly into a bowl providedPits collect in the drip trayHigh stability thanks to the four rubber feetPusher can be turned over to remove the stones from mirabelle plumsEasy to clean the plum destoner under running water Dimensions: approx. 20 x 11.5 x 23 cm

Pressure force 883 kg at 180 bar, connection G M16x1.5, nominal pressure 250bar

Pressure force 1272 kg at 180 bar, connection G M16x1.5, nominal pressure 250bar

Pressure force 2261 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar

Pressure force 3534 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar

Pressure force 5089 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar

Single-acting hydraulic cylinder (plunger cylinder) without mounting parts on the piston rod and cylinder base. The piston rod has a diameter of 20 mm and is fitted with an extension lock at the lower end. Our cylinders are provided with a locating hole for dowel pins on the rod and base for easy attachment of fastening elements. A welding bevel is screwed onto the upper end of the piston rod.Pressure force 565 kg at 180 bar, connection G M14x1.5, nominal pressure 250bar

Single-acting hydraulic cylinder (plunger cylinder) with Ø16 mm ball joints. The piston rod has a diameter of 20 mm and is fitted with an extension lock at the lower end. The ball joint have a lubrication hole for lubricating the joint with a pointed nozzle.Pressure force 565 kg at 180 bar, connection M14x1.5, T = 35 mm, nominal pressure 250bar.

Single-acting hydraulic cylinder (plunger cylinder) with Ø16 mm ball joints. The piston rod has a diameter of 25 mm and is fitted with an extension lock at the lower end. The ball joint have a lubrication hole for lubricating the joint with a pointed nozzle.Pressure force 883 kg at 180 bar, connection M16x1.5, T = 35 mm, nominal pressure 250bar.

Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 30 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 1272 kg at 180 bar, connection M16x1.5, T = 38 nominal pressure 250bar.

Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 40 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 2260 kg at 180 bar, connection M18x1.5, T = 38 mm, nominal pressure 250bar.

The ability to drive underneath the container, combined with its stackability, greatly simplifies the storage and retrieval of grit containers, saving both time and space. In addition, the tool-free installation of the highly sturdy lid has been significantly simplified. The new Plus3 generation of grit containers adds three more advantages for handling and installation to the benefits of fiberglass-reinforced plastic (FRP) grit containers. (LxWxH in cm) 89x60x69, capacity 200 LThe additional advantages of the Plus3 container: forklift-accessible and stackable with the lid closed—lid can be removed without tools—lid design is very sturdy and durable

The stackable design greatly simplifies the storage and retrieval of the grit containers, saving both time and space. In addition, the tool-free installation of the highly sturdy lid has been significantly simplified. The new Plus3 generation of grit containers adds three more advantages for handling and installation to the benefits of GRP grit containers. (LxWxH in cm) 121x82x67, capacity 400 LThe additional advantages of the Plus3 container: - stackable with the lid closed - lid can be removed without tools - lid design is very sturdy and durable

The ability to drive underneath the container, combined with its stackability, greatly simplifies the storage and retrieval of grit containers, saving both time and space. In addition, the tool-free installation of the highly sturdy lid has been significantly simplified. The new Plus3 generation of grit containers adds three more advantages for handling and installation to the benefits of fiberglass-reinforced plastic (FRP) grit containers. (LxWxH in cm) 89x60x69, capacity 200 LThe additional advantages of the Plus3 container: forklift-accessible and stackable with the lid closed—lid can be removed without tools—lid design is very sturdy and durable

made of plush, with bendable feet, approx. 32 x 19 x 33 cm