Products

With 4 hydraulic connections and 1 3-pin electric coupling. Hydraulic connection M22x1.5 AG 15L

With 4 hydraulic connections, flow rate max. 40 l/min, max. pressure 250 bar, hydraulic connection M22x1.5 AG 15L

With 4 hydraulic connections, flow rate max. 40 l/min, max. pressure 250 bar,Hydraulic connection G1/2?IG

With 2 hydraulic connections, flow max. 70l/min., max. pressure 250 bar, hydraulic connection G1/2"~ Female thread, can be coupled under pressure.

The try square is also called a rafter square, rafter square or speed square and has the shape of an isosceles right-angled triangle with a stop on a side. ~The variety of scales and recesses make the try square a multifunctional tool, which is ideal for marking lines and angles as well as as a scribing tool and saw guide. The try square from SOLA combines the functions of a ruler, try square, miter square, protractor, marking aid, saw guide and rafter knife.The rafter square in the shape of a right-angled triangle has a robust stop on a side for exact 90 and 45 markings. In addition, the stop in conjunction with the robust edge also serves as a sawing aid or saw guide. Parallel to the stop there is a recess with a metric scale in mm and cm (offset scale), which is ideal for marking vertical lines. ~The measuring leg of the other catheter also has a metric scale, the quick one Measurements allowed. Below this scale there is a recess with notches with which horizontal or parallel lines can be marked. The hypotenuse has a degree scale for angle measurements between 0 and 90. The desired angle degree is determined starting from the opposite pivot point (designation on the rafter angle: PIVOT). ~ ~Parallel to the degree scale there is another recess with two scales for shifter cuts. The lower scale is for ordinary rafters or normal rafters (designation on the rafter angle: COMMON), the upper scale for hip rafters and valley rafters (designation on the rafter angle: HIP-VAL). A 90 marking aid for purlin cuts runs at right angles to the degree scale. ~Technical data:Item name: ~ Rafter angleMaterial: ~ AluminumSurface: ~ coatedColor: ~ blackSpecial feature: ~ Stop ~Roof rafter gaugeScaling: ~ mm/cm, ~1-piece, laseredScale grid: ~ 1 mmAngle dimension: ~ 45, 90, variable 0 - 90Scribing holes: ~ 0.5cm

?With a strong magnet on the back, an adjustable stand, carabiner, bottle opener, tripod thread. And also with 4 light modes: very bright, bright, medium, flashing lightBattery 500 mAh, rechargeable via Type C cableMaterial: aluminum, polycarbonate, ABS, siliconeDimensions: 72 x 46 x 21 mmWeight: 6gColour: BlackNumber of inputs: 1USB Type C:  ~ yesBatteries: Li-PolymerBrightness: 300 lumensLight source: ~COB

Through various combination options by reconnecting the supplied PTO shaft stub, gear ratios of 1:1, 1:2 or 2:1 can be achieved while maintaining or changing the direction of rotation. This results in 6 different possible uses. The PTO shaft stub is fixed in the hollow shafts by circlips.44 kW at 540 rpm or 1000 rpm.PTO shaft connections: 3x 1 3/8 x 6Generally, torque peaks are up to 2 times higher of the nominal torque does not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Brand: K25Handle: aluminumBlade: stainless steel - titanium coatedBlade size: 9 cmBlade thickness: 2.5 mmContains:Flashlight< li>FirstarterSeat belt cutterWindow puncherNylon cover / sheathPackaging: gift packagingSize: 6.5 cm x 15cm

​Multifunctional Scarf Camo Olive – Lightweight, Flexible, and VersatileThis multifunctional scarf in olive green camouflage is the perfect companion for work, leisure, and hunting.Made from 100% polyester with a weight of only approximately 130 g/m², it is exceptionally lightweight and comfortable to wear.Thanks to its one-size-fits-all design, it adapts flexibly – whether as a scarf, headband, hat, face mask, or headscarf.Ideal for indoor and outdoor use, it protects against wind, dust, and sun.Whether working in the barn, in the fields, or during outdoor activities – this scarf is practical, easy to care for, and quick-drying.A true all-rounder for everyday use!Material: 100% Polyester

​Orange Multifunctional Scarf – Highly Visible, Lightweight, and VersatileWhether working in the forest, hunting, or in the fields, this bright orange multifunctional scarf ensures you are highly visible and well-protected.Made from 100% polyester with a weight of approximately 130 g/m², the scarf is exceptionally lightweight, breathable, and comfortable to wear.It is ideal as a scarf, headband, bandana, face covering, or hat.The one-size-fits-all design adapts flexibly to any head shape.Thanks to its striking color, the scarf is also perfect for any activity where visibility and safety are paramount – whether outdoors at work or during leisure time.Material: 100% Polyester

Practical universal scissors can be used for scissor and knife cutting, as a fruit and vegetable peeler and bottle opener. Stainless steel blade, separable blades for use as a knife cut. Ergonomically shaped handles, total length: 21 cm.

Outer material: 80% cotton, 18% polyamide, 2% elastane. High wearing comfort, reinforcement in the heel and toe area, seamless, therefore no pressure points, optimal moisture transport, keeps feet dry, ideal as work socks.

High-quality universal device made of stainless steel.With a comfortable 2-component handle. Length approx. 24cm.Can be used as ~Paint scraperNail pullerPaint scraper ~Paint roller cleaner

The multifunctional stainless steel washbasin is a versatile and practical device that is used in various applications. Includes fitting and water supply through normal hose connection. Material: 18/10 stainless steel, dimensions: 100x50.5x77cm (LxDxH), weight 8.5 kgMobile and flexible: The multifunctional washbasin can be used anywhere. Whether in the garden, on the campsite, in leisure facilities or in your own home - it is always ready for use.High-quality material: Made of durable stainless steel (304), the washstand is corrosion-resistant and easy to clean. Spacious sink: The spacious sink offers enough space for various applications. Whether washing dishes, washing fruit and vegetables or gutting fish - the multifunctional washbasin meets all requirements.Practical features: The washbasin comes with a fitting and can be supplied with water via a normal hose connection. So nothing stands in the way of a comfortable washing experience.Versatile uses:Fishing and filleting: For anglers, the washbasin is ideal for gutting and filleting of fishing.Camping and outdoors: At the campsite it serves as a camping sink. It is also ideal for barbecues, parties and planting flower boxes.Garden and workshop: In your own garden it can be used to clean garden tools.Leisure facilities: Found in leisure facilities It can also be used.Space-saving and easy to assemble: The multifunctional washbasin can be assembled quickly and easily. It is compact and takes up little space.Overall, the multifunctional stainless steel washbasin is a practical solution for a wide range of applications. Whether indoors or outdoors - it makes washing up and cleaning easier and is an indispensable utensil for everyone who values quality and functionality.

​Mobile workbench for universal use. Quick assembly and disassembly thanks to foldable, height-adjustable legs. Easy to transport (only 22 kg), load capacity 120 kg, MDF table top with 960 x 710 x 20 mm and 20 mm hole pattern. All-round V-groove for suitable clamps, Dimensions: Folded: 750 x 1000 x 88.5 mm, Set up: 750 x 1000 x 1000 mm. Supplied with 2 x one-hand clamps, 4 x bench hooks and 2 x corner connectors.

Set consisting of the powerful multi-hammer, an additional quick-release chuck, and a practical SDS-Plus drill bit and chisel set. The hammer can be used for non-impact drilling in two speeds, for hammer drilling, and for chiseling. The Metabo Quick System allows for quick and easy switching between the SDS-Plus hammer chuck and the quick-release chuck for drilling in wood and metal.The built-in Vario electronics and two-speed gearbox ensure consistent speed, even under load. Mechanical decoupling of the drive when the drill bit jams ensures safe operation thanks to the built-in Metabo safety clutch. Precision-mounted high-performance hammer mechanism in an aluminum alloy housing.Adjustment wheel for preselecting speed and impact rate; lower-mounted switch protected against damage and dust; lockable switch for comfortable continuous operation.Technical Data:Max. single-impact energy (EPTA): 2.8 JMax. impact rate: 4,200 /minRated power input: 800 WDrilling diameter in concrete with hammer drill bits: 26 mmDrilling diameter in masonry with core bits: 68 mmDrilling diameter in steel: 13 / 6 mmDrilling diameter in softwood: 32 / 28 mmNo-load speed: 0–1,050 / 0–2,500 rpmSpeed at rated load: 790 / 1,860 rpmTorque: 18 / 18 NmTool chuck: SDS-plusChuck shank diameter: 50 mmWeight without power cord: 3.1 kg

​High-strength, curved shackle,with high-strength bolt and lock nut,can also be used for lifting – see load capacity!

?A measuring device for determining the concentration of sugar in must or beer wort in Balling degrees as well as for determining the potential alcohol content in wine or beer (%).One Balling degree (1Blg) corresponds to approximately 10 g of sugar 1 l juice (must). ~ ~The device was calibrated at a temperature of 20C.With three scales for measuring the sugar concentration in g/l and in degrees Blg as well as the potential concentration of alcohol in % ~ - Tube for measurementNotes:To carry out the measurement, the tube should be 2/3 filled with the must or beer wort. The liquid should not contain any solid particles or gas bubbles. The amount of liquid should be such that the hydrometer placed in the tube can float freely and does not touch the walls or bottom of the tube.Example: Suppose the must has 20 blg, this corresponds to 200 g/l sugar and means that the potential concentration of alcohol in the wine will be 9.6%.ATTENTION: For convenience, different ranges of sugar concentration in the must have been marked on the scale for different types of wine: dark red ranges (22 - 25 Blg) - dessert wines (sweet), - yellow range (15 - 22 Blg) - table wines (dry),For a correct fermentation process, it is important that the sugar concentration before fermentation is in the range 22 to 25 Blg lies. If you prefer very sweet wines, add sugar in several steps, e.g. B. on the 1st, 5th and 12th day of fermentation. The wine can also be sweetened at the end of fermentation.The sugar content in the beer wort is measured in a similar way to wine. On the scale, the recommended range of sugar concentration in the initial phase was marked with an amber color (8 - 10 Blg). The fermentation of the beer wort is considered complete when the values ??are in the green range (0 - 2 Blg).

Revolutionary universal pliers for holding, gripping, cutting, stripping and crimping. Professional version with 2-component handle.

244x138x60 mm, mit 5-poligem Bajonettanschluss, mit Lampen 

High-quality multi-purpose grease, ~specifically developed for the gearboxes of hedge trimmers. Electric chainsaws and cordless chainsaws.Tip: check the level in the gearbox after the first few hours of operation ~and top up if necessary!Tube with 80 grams.

The solar-powered MultiSonic ultrasonic animal repeller reliably protects outdoor areas from unwanted animal visitors – completely chemical-free and humane.The MultiSonic solar-powered ultrasonic animal repeller provides reliable protection against unwanted animal visitors – completely chemical-free and animal-friendly.... Effective animal deterrent through ultrasound and LED strobe lightSolar-powered for flexible, off-grid usePIR motion detector reliably reacts only to body heat – no false triggers from leaves or branchesDay and night mode: Day: Ultrasound activated, LED strobe light deactivated - Night: Ultrasound activated, LED strobe light activatedIndividual protection thanks to a 4-stage frequency controller – effective against different animalsAdjustable volume via integrated volume controlAlternative mains operation possibleFrequency settingsDay mode:0 Off1 9 kHz - 19.5 kHz repels mice, rats, dogs, foxes, martens, etc.2 19.5 kHz - 24.5 kHz repels cats, raccoons, badgers, skunks, etc.3 24.5 kHz - 45.5 kHz repels bats, birds, rodents, etc.4 Alarm tone scares away wild animals5 13.5 kHz - 45.5 kHz Universal setting for Repellent for all kinds of unwanted animalsTechnical specifications:Voltage 5 V DCLength 10.6 cmWidth 10.6 cmHeight 31.4 cmBattery technology Li-ionBattery capacity 2,000 mAhSound pressure level 90 - 110 dBFrequency 9,000 - 45,500 HzDetection area 135 m²Motion detector range 8 mDetection angle 220°Duration of sound vibration (random) 30 secHousing material PlasticWeight 280 gProtection class IP54

Multitool cordless pruner/hedge trimmer GE-HC18Li-LoseThe cordless multifunctional tool GE-HC 18 Li T is a powerful device that can be used to reach higher areas Branches and high hedges can be shortened and trimmed from the ground without any effort and independent of the power grid. ~In addition, the metal gear ensures high durability and the OREGON quality sword and the OREGON chain ensure clean cutting results. ~The attachment, which can be rotated through 90, ensures effortless horizontal cuts. ~The claw stop prevents slipping when sawing. ~The automatic chain lubrication via an oil container supplies the OREGON chain with the necessary lubrication. ~If necessary, it can be tensioned and changed without tools using the practical chain tensioner. A chain catch bolt reliably prevents the chain from accidentally slipping off the bar.The knives made of laser-cut and diamond-ground steel ensure clean cutting results. You can transport and store the hedge trimmer safely and conveniently in the case.The telescopic handle, which can be infinitely locked from 880 mm to 1820 mm, can be precisely adjusted to the desired working height. ~ The additional handle, which is also infinitely adjustable, is adapted to each user using the practical quick-release fastener. ~In order to be able to carry out even difficult height cuts cleanly and precisely, the motor head can be adjusted 7 times and the main handle 4 times tilt and thus adapt to every work situation. ~Battery and charger are not included. ~Member of Power X -Change family, 1x18V battery required90 rotating attachment for effortless horizontal cuttingMotor head can be tilted 7 timesMain handle can be tilted 4 timesInfinitely lockable aluminum telescopic handle (880 - 1820 mm) Adjustable additional handle with quick releaseMetal gear for long service lifeOREGON quality sword and chain Tool-free chain tensioning and chain changingKnives made of laser-cut and diamond-ground steelStable quiver for storage and transportCarry strapOil container for automatic chain lubricationDelivery without battery and without charger ( sold separately)Technical details:Bar length of chainsaw: 200 mmCutting speed of chainsaw: 3.76 m/s Cutting length of hedge trimmer: 400 mm Tooth spacing: 16 mm Cuts per minute: 1700 min^-1

Cordless multifunctional tool with powerful 48V battery. Incl. telescopic handle 65cm for hard-to-reach places as well as a pruning saw and a hedge trimmer attachment. Lightweight and quiet. The bumper on the pruning saw attachment ensures maximum cutting accuracy. Maximum flexibility thanks to the rotating handle on the hedge trimmer attachment. Battery and chargernotincluded.Technical data:Rated voltage: 48VBattery capacity: 2.0AH, 4.0Ah , 5.0AhMotor/power: brush motor/ 350WHedge trimmer:Bar length: 46cmCutting length: 44cmTooth spacing: 28mmBlade type: double knife , laser cutWorking time: up to 40 minutes with the 2.0Ah batteryWeight: 4.6 kgPruner:Bar length: 25cm/10?Chain lubrication: automaticChain tension: with toolOverload protection: yesWorking time: approx. 85 cuts with the 2.0Ah battery (10cm)Weight: 4.3 kg