Skip to main content Skip to search Skip to main navigation

Products

Item number FA123588
Browin Klarowin Turbo 2 - a professional set for beautification Klarowin Turbo 2 - a professional set for beautification

Klarowin Turbo 2 is a rich, efficient and fast-acting product consisting of two components for clarifying wines and mash.?Two components - silica brine and chitosan are effective in removing all kinds of cloudiness.For all types of wine, sugar cuve and grains. Mashing - the agent can be used for white, red and rose wines as well as for mashing. Works within 24 hours - the agent has a quick clarifying effect, it removes cloudiness within 24 hours. One pack is enough for clarifying 25 L of wine. The use of Klarowin 2 is simple and problem-free. The set consists of component A - silica brine, which is negatively charged, and component B - chitosan brine, which is positively charged and has a broad chelating effect.  ~The agent removes tannin turbidity (-), proteins (+) and metal ions (+).The use of this agent consisting of two components guarantees the removal of all types of turbidity in wines and mash.Klarowin Turbo 2 works quickly, the clarifying effect is already there Visible for 24 hours.Attention: When carrying out the clarification, care must be taken to dose the products according to the instructions, as using too large a dose can cause secondary cloudiness or a change in the color of the wine.Instructions for use: After the end of the After fermentation, drain the liquid from the deposits and degas thoroughly (an excess of CO2 would extend the clarification time). Add ingredient A (silica brine) in a proportional amount to the clarifying liquid (the content is sufficient for a maximum of 25 L). Then mix gently for about 10 seconds and let stand for about 1 hour. After this time, add ingredient B (chitosan solution) in a proportional amount to the clarifying liquid (the content is sufficient for a maximum of 25 liters of liquid). Stir gently for about 10 seconds and let the whole thing stand for about 24 hours. Then drain the liquid from the deposits.ATTENTION: The product may slightly change the color of the wine.Ingredients:Silica brine 14 ml: water, silica, malic acid, chitosan brine (from crustaceans) 46 ml, preservative: sodium pyrosulfite (sulfites)

€3.49*
Item number 37397
Klausol claw cleaning solution Klausol claw cleaning solution
Contents: 125 ml

Acid-based cleaning solution for hoofs, ready to use!Properties:Klausol is an acid-based cleaning solution for cattle and sheep. Klausol is excellent to use and successful.Application: ~Clean claw parts well.Spray Klausol onto the damaged claw parts and edge areas or brush on until they are well wetted with liquidThen allow the liquid to dryWear protective gloves when handling Klausol! Product composition:Organic and inorganic acids

€14.95*

Content: 0.125 l (€119.60 / 1 l)

Item number FA115426
Klemmhülse zu Steyr T80 Klemmhülse zu Steyr T80

Klemmhülse zu Steyr T80, T84, T86, T180 teilweisePos.Nr 13

€24.95*
Item number FA4080
KLEPP 1050 Seat Cushion KLEPP 1050 Seat Cushion

Seat cushion made entirely of black faux leather, for KLEPP 1050 seat; width: 45 cm, depth: 38 cm, hole spacing: 120 mm.

€135.00*
Item number FA114644
Reber Kneading attachment suitable for meat grinder N12EL Kneading attachment suitable for meat grinder N12EL

Kneading attachment (similar to a food processor) with plastic mixing bowl and dough hook suitable for meat grinder item no. 34456. Dimensions bowl 22.6 cm, height 14.9 cm (volume approx. 5 liters). Kneading performance approx. 1.6 kg of dough in 3 minutes. It is attached to the motor module of the meat grinder!

€249.00*
Item number FA3750
KERBL Knee Knee

Suitable for the Uni Syringe 19880

€5.99*
Item number 54282
Knee 90� IT/AG Knee 90� IT/AG
Thread: 1 Zoll

robust, hot-dip galvanized design

From €4.63*
Variants from €3.03*

Average rating of 4.5 out of 5 stars

Item number 54278
Knee 90� male/female Knee 90� male/female
Thread: 1 Zoll

robust, hot-dip galvanized design

From €4.76*
Variants from €3.03*
Item number FA108653
Tecwerk Knee board 245x490x30mm foam Knee board 245x490x30mm foam

Base made of high-quality hard foam for flexible use on hard floors with practical carrying handle and storage compartment for small items Other technical features Width: 245mm Length: 490mm Material: foam (LD45) Height: 30mm

€21.50*
Item number 31755
Knee IG/AG Knee IG/AG
Thread: 6/4 Zoll

Galvanized, robust design

From €11.99*
Item number FA38675
Knee pads box shape Knee pads box shape

certified according to DIN EN 14404 black box shape with 4 buttons puncture-resistant according to DIN EN 14404 up to 250 N = 25 kg = performance level 2 the wide textile stretch straps and the additional Ergo-Fix prevent the straps from cutting into the back of the knee (strap attachment to the upper - and lower leg)

€26.99*
Item number FA28541
BGS Knee protection mat Knee protection mat

Practical knee protection mat made of acid-resistant EVA foam, dimensions: 480 x 320 x 36 mm, with carrying handle

€19.95*
Item number FA25681
Schröckenfux Knife back 130 cm, with oval hole Knife back 130 cm, with oval hole

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€37.00*
Item number FA25687
Schröckenfux Knife back 160 cm, with oval hole Knife back 160 cm, with oval hole

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€45.00*
Item number FA25673
Schröckenfux Knife back 5' (163cm) for 20 blades, suitable for Busatis and Steyr Knife back 5' (163cm) for 20 blades, suitable for Busatis and Steyr

Suitable for Steyr T80, T84, T86 with original Busatis or Steyr side mowers

€41.90*
Item number FA7539
Knife back 5', 6 mm, 20 blades Knife back 5', 6 mm, 20 blades

Suitable for Steyr T80-180 with cleaning plates

€42.90*
Item number FA7678
Schröckenfux Knife back for knife head N35, 1800 mm Knife back for knife head N35, 1800 mm

€45.00*
Item number FA25685
Schröckenfux Knife back with threaded hole 145 cm Knife back with threaded hole 145 cm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€39.90*
Item number FA25689
Schröckenfux Knife back with threaded hole 160cm Knife back with threaded hole 160cm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€45.00*
Item number 41919
Schröckenfux Knife blade 2 mm Knife blade 2 mm
Version: gezahnt

Blade N36/5g serrated, 75x58x2mm - narrow mortar blade. This type of blade was installed on the UNI-Rasant and UNI-Florett mowers.

From €1.13*
Item number FA122218
ESM Knife blade 3-hole, countersunk at the bottom, instead of 344.0061 Knife blade 3-hole, countersunk at the bottom, instead of 344.0061

Cutter blade with centre hole 10 mm suitable for ESM universal cutter bar C. 

€2.92*
Item number FA49844
Knife Claas pass. 841.599.1 Knife Claas pass. 841.599.1

€29.90*
Item number FA48751
Knife for CLAAS Rollant, Variant, Quadrant Knife for CLAAS Rollant, Variant, Quadrant

Thickness 5mm

€29.90*

Average rating of 5 out of 5 stars