Products

Hydraulic pump 19cm, rotation direction left, drive 9 teeth, 50mm

Steering pumpsuitable instead of Hema: 1P1136AFT

This hydraulic pump can be used instead of the original 8cm in the vehicles Lindner Geotrac 50 and Lindner Geotrac 60 as well as Steyr M948 and M958.

Steering pump for Deutz, Hrlimann, Lamborghini, Same

Hydraulic pump with a delivery volume of 14.4 cm³/rev. in the left-hand direction of rotation and with a conical shaft (cone 1:5). The fitting diameter for centring the pump is 50 mm. The flange connection is compatible with Deutz, Fendt and Steyr.Dimensions:Mounting hole pattern: 60 x 60 mmCentring diameter: 50 mmLength: 104.2 mmDistance between suction and pressure lines and flange: 45 mmSuction line hole pattern diameter: 40 mm, 4 M6 screwsPressure line hole pattern diameter: 35 mm, 4 M6 screws

Schauer, Bauer, Bruer, LugmairSuction line R 3/4" IT, pressure line R 1/2" IT, disc spring 4 mmMLPD/G 214 C.

Hydraulic pump with 17cm/rev. Delivery volume in the right-hand direction of rotation and with a conical shaft (cone 1:5). The fitting diameter for centering the pump is 80mm.

Hydraulic pump with 17cm/rev. Delivery volume in the clockwise direction of rotation. Drive via claw coupling with driver (included in delivery). The fitting diameter for centering the pump is 52mm.

VIVOIL hydraulic pump with 19.2 cm delivery volume per revolution. The operating pressure of the pump is 210 bar. The maximum working pressure is limited to 250 bar. The drive speed of the hydraulic pump must not exceed 3000 rpm. The drive shaft has 9 teeth according to DIN 5482 B 17 x 14 and the centering has a diameter of 80mm. For tractors/tractors with a Perkins engine with an intermediate flange, e.g. Lindner tractors from the BF series, 300, 400, 500, 600 and 1000.

Hydraulic pump with 19.5cm/rev. Delivery volume in the right-hand direction of rotation and with a conical shaft (cone 1:5). The fitting diameter for centering the pump is 80mm.

Shower: PLO20:20, MLPD/G 220CSuction line R 3/4?IGPressure line R 1/2?IG.

The driver is included in delivery.

Hydraulic pump 22.5cm direction of rotation clockwiseFlange SAE-A with drive shaft 9 teeth (9T 16/32DP)Suction side hole circle 40mm M6 threadPressure side hole circle 35mm M6 thread

Hydraulic pump with 6.0cm/rev. Delivery volume in the clockwise direction of rotation. Drive via claw coupling with driver (included in delivery). The fitting diameter for centering the pump is 52mm.

Steering pump for Deutz, Hrlimann, Lamborghini, Same

For the hydraulic drive of firewood splitters, cable winches, forestry cranes, etc.Consisting of:1 piece transmission gear with PTO shaft stub 1:3.81 piece hydraulic pump BG2 19.2cm /rev., clockwise rotation1 piece pump driver1 pieces angle flange for suction pipes R1/2 inch female thread1 pieces angle flange for pressure pipe R3/8 inch female threadDelivered in individual parts!Calculation example:Wood splitter with hydraulic cylinder inner diameter 100 mm, stroke 1000 mm, speed on the PTO shaft 350 rpm.For use comes a gearbox with a ratio of 1:3.8. This results in a pump speed of 1330 rpm (350 x 3.8 = 1330 rpm).The hydraulic pump delivers 36L/min at a PTO speed of 350 rpm.