Hand tools

For filling lever, one-hand and compressed air grease guns. In order to be able to fill grease guns of brands other than Pressol, a filling nipple M10x1 is included for retrofitting. The dust cover can be pushed up the suction tube to check the remaining contents of the bucket at any time. No unwanted grease leakage due to the shut-off valve on the filling coupling.

Made of PVC, suitable for the easyFill grease gun.

Suitable for 400 g grease cartridges or loose grease using a spatula. Non-slip handle, low effort required when lubricating thanks to optimal lever ratios. Delivered without mouthpiece and hose.

​Special mouthpiece for all DIN grease nipples with lever-operated claw lock - therefore secure hold and no leaching grease. Extra-long XL version with 88 mm length and only 15 mm diameter - for optimum working for optimum working and easy unlocking in hard-to-reach places, e.g. on construction machinery or for use in agriculture.

The new easyFILL 400 does not require any spring mechanism. Simply insert the cartridge (400g), insert the grease follower piston and get started.Due to the vacuum in the grease gun head, the piston moves upwards all by itself and as if lubricated. Thanks to the variable stroke principle, the grease gun can be operated very easily, even with minimal lever movement.Delivery pressure 400 bar, scope of delivery: press, 10 pcs. PVC follower pistons.Handy, powerful grease gun, suitable for all commercially available 400g cartridges according to DIN 1284. With innovative grease follower piston system, ready for use quickly and easily.With variable stroke, so grease can be conveyed with minimal lever movements.An ergonomic, non-slip handle for optimal power transmission and handling, as well The grease gun head made of die-cast zinc makes this compact grease gun the ideal helper - even in rough conditions!Quick venting quickly and easily by half a turn of the grease gun tube.If there is greater counter pressure (e.g. resinous lubrication point), the short stroke allows the lubrication point to be removed can be overcome with significantly lower pressure.Due to the fact that it can be easily dismantled, the device can be easily cleaned. The scope of delivery includes 10 grease follower pistons, delivery without nozzle and hose.Technical data:Connection: M10x1Fill volume: 400cmGrease piston : 9mmDelivery pressure: up to 400barBurst pressure: 900barDimensions: 330x140x66mm

Shock grease gun with pointed mouthpiece for swords / guide rails, bearings, hinges, without grease, length 165mm.

​Pressol one-hand grease gun with bleed valve. Solid zinc die-cast head with adjustable one-handed handle - for high volume or high pressure in difficult applications. The press is designed for use with400g grease cartridges, loose grease or for filling with a grease filling device. Complete set incl. armored hose 300mm and precision injector nozzle.

Incl. armored hose and round head nozzle. Filling options: 400 g cartridges or loose grease using a spatula, removable and movable push rod system. High accuracy of fit between cylinder and piston, which prevents dummy lubrication.

Professional design, international patents. Cast in one piece from die-cast zinc. Delivers at any opening angle, delivery rate 1.3 cc, at 400 bar. The advantages: can be fully dismantled, meaning problem-free cleaning - pump pistons and cylinders with the highest accuracy of fit - shaped sleeves, meaning a tight fit with loose grease and cartridges. The grease chamber can be vented by turning the pump head halfway. Open handle - no pinching of fingers.

A revolution in lubrication technology!Fast: With one click your coupling is on your grease nippleConvenient: Because of the small size it is very light the coupling too to be used in narrow spacesClean: No more wasted grease thanks to an exclusive ball closure systemStrong: Highly precise processing of the parts

5 pieces each M6x1, M8x1, M10x1 and 45 M8x1, M10x1.

Original Pressol grease nipples in a practical PVC cassette.

Original Pressol

Impact nipple (without thread)

High-quality multi-purpose grease with good adhesion and good resistance to water. Temperature range -40 to +150 C.

Light-colored, highly adhesive, silicone-free, non-toxic special grease in a quickly evaporating solvent Additives to improve the anti-corrosion properties and anti-aging properties are only contained in very small amounts Particularly smooth, non-dripping lubricating grease Temperature-resistant from -20 C to +140 C Spray behavior : selective jet for targeted application of the desired grease thickness, grease does not run away and can be layered up as desired for the lubrication and maintenance of slide rails, bearings, rollers and hinges in industrial plants, the food and beverage industry and agriculture, etc.

Practical set with 3 grip pliers 125, 180 &~ 250mm, as well as 150mm long jaw pliers. Delivered in a storage roll bag.

with wire cutter with adjusting screw and quick release lever with special jaw for secure gripping, tensioning and holding head made of high-quality chrome vanadium steel forged Other technical properties Total length MV: 225 mm / 10"~

​The new and improved Gripple collet not only tensions the wire, but also regulates the applied load for consistently reproducible results and thus maximum wire service life.Gripple collet enables wires up to 400 kg to be tensioned, thanks to the 6:1 conversion of the tensioning mechanismCan be used for fence wires, trellis wires and anchoring ropes with a diameter of up to 6 mmMeasuring range: 100 - 300 kgEase of use and low weight make it easy to work with, even with multiple usesIdeal for use in the areas of pasture fencing as well as vegetable and fruit cultivation

Oval steel tube handle · painted · with tension lever and hand guard · hardened and ground planer teeth · for fresh wood

1 quality hammer each with 100, 300 and 500 g.

Easy-to-use hand stapler made of impact-resistant plastic. Suitable for simpler work in the home and garden. Easily processes staples up to 10 mm.

The small hand tacker with high-quality ABS plastic housing for universal use.Processes fine wire staples from 4 to 10 mmHandles hammer tacker staples HHandle lock for storage when not in useClearly visible staple level indicatorUnderloading mechanism with safety release for quick reloadingLoading capacity: 150 x fine wire staple A type 53150 x fine wire staple H type 37Materials that can be processed: Fabrics/ textiles/ upholstery/ carpetsHandle lockClamp viewing windowSafety release