Vehicle construction

​LED worklight 70 W, 10260 lumen, aluminum housing, polycarbonate glass, tilt-adjustable, DT connection cable approx. 20 cmTechnical details: Light source: 10 x high-performance LED 7 W eachVoltage: 10-30 Volt DCLight intensity: 7000 lumen effective  Light color 6000kDimensions (WxHxD): approx. 172 x 91 x 93 mmProtection class IP69KEMC noise suppression, RoHS, ECE Reg10-E9 

LED work light 120 W, (40x3 W), approx. 12000 lumens, aluminum housing, polycarbonate glass, tilt adjustable, connection cable approx. 20cmTechnical details: ~Bulbs: 40 x high-performance LEDs of 3 WVoltage: 10-30 volts DCLight intensity: approx. 12000 lumensLight color 6000kDimensions (WxHxD): approx. 167 x 65 x 91 mmLifespan of the LED approx. 30,000 hProtection class IP68, ECE R10, E9 10R-05.16140

High-quality LED work light with 180 beam angleDimensions: 114 x 98 x 78 mmTechnical data:Number of LEDs: 12Operating voltage up to V: 32Operating voltage from V: 9Complies with ECE standard: R10With surge protectionColor temperature (K): 6000Housing material: die-cast aluminumCable length mm: 250 Power consumption W: 48Luminous flux: 4500 effectiveLight distribution: long-range illumination, 180 beam angleProtection class IP68 ~Specification: RoHSDiffuser material: PC (polycarbonate)  ~

4 functions: 100% light output white/orange, energy saving mode 30% light output white, SOS signal orangeDimensions: 115x100x220 mmwith handle and switchincl. Charging cable for cigarette lighter (12/24V)incl. Charging cable 230VMagnetic mounting15W, 10-30VLight output: 1000 lumensColor temperature: 6000K Illumination: point light (spot)Battery life at 100% 4 hours, at 30% 13 hours (charging time approx. 3.5 hours)Protection class: IP67Operating temperature: -30C +50C

LED work light with die-cast aluminum housing, optimal heat dissipationsuitable for Steyr CVT, Case CVXTechnical data:10-36V, 25WTemperature range: -40C to 80 CProtection rating: IP68K1800LumenPolycarbonate lensVibration Rating: 15GConnection cable: approx. 20cmWide steel 60EMC, RoHSWxHxD: 83x138x79mm

2 lines, 300x200mm

single line, for cars, 520x120mm

Plastic housing, integrated lens, 2 M5 fastening screws, screw spacing 45mm, LxWxH: 82x26x39mm

white, connection DC 0.8m cable, WxHxD: 85x49x30mmHole spacing: 45mm

Support load 300 kg, height 400 mm, stroke 220 mm

LED four-function light set, with 2 pieces (indicator, tail light, brake light, license plate light) ~2 x 5 LED rows (license plate = 4 LED's), in clear glass look, housing welded waterproof, ~Dimensions approx. WxHxD: 105x100x35 mm , 12 V, can be used on the right and left side, with 2.5m intermediate cable and 7.5m connection cable, 13-pin. Plug, magnet holder, assignment according to ISO 11446 (cannot be used for 7-pin systems)

With 2 front lights (indicator, position light) and 2 rear lights (tail, brake, indicator and license plate lights), connection cable for 7.5 m, connection cable 2.5 m, 7-pin plug, including bulbs

Suitable for Stabilus LIFT-O-MAT. Complete with fastening elements, end position cushioned (no damage to the hinges).This is just a small excerpt from the LIFT-O-MAT gas pressure spring program. We can supply you with the right gas pressure spring for many tractor types. Please provide us with the 6-digit Stabilus number that is printed on the gas spring.

Die-cast aluminum to protect the compressed air brake system against contamination

Linseal is not an adhesive, but a water-soluble liquid that contains rubber particles. The particles wedge themselves purely mechanically in the split rubber and, depending on the tire structure, seal punctures of up to 15 mm object diameter and also air loss between the tire and rim. Linseal is filled into the tire or tube via the valve stem.Properties:- reusable- applicable down to -25C- non-toxic- does not stick- remains liquid - washable with waterArea of application:Agriculture in general, industrial machinery, construction machinery, garden tools, wheelbarrows,... all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after.

Seals punctures of up to 15 mm object diameter and also air loss between tire and rim. Area of application: all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after, contents 25 liter canister

​Ideal for securing loads in the vehicle quickly and easily. (e.g. boot)No more luggage flying around in the trunkSimple and inexpensiveSystem can be loaded up to max. 760 kgReinforced edge cord Ø 10 mm for secure strappingSewn-on fastening straps 100 and 150 cmMaterial: polypropyleneScope of delivery: 1 net 100x120 cm (mesh size 25x25 mm), 2 snap hooks, 2 straps.One end of the strap is attached to the PES tension straps of the net using clamp locks, the other end of the strap is attached to the anchor points of the vehicle using pointed hooks

for ball tilt bearing type 1000. Up to 8 t total weight with 45 ball diameter. Use: in agricultural vehicle and light tipper construction for rear tippers or three-way tippers. With loose, replaceable Durethan shell.

12 mm for tilt hinge

white-red, fluorescent edge, with chain

For radiator hood, loose - without bracket.

Increased service life thanks to carcass design, top quality, (without tube)

Increased service life thanks to carcass design (without tube)

Metal-polymer plain bearing CSB20 to ISO 3547 (DIN 1494) with embossed lubrication pockets in a low-maintenance design. The plain bearing bushes are equipped with a low-maintenance sliding material for use in mixed friction applications with grease or oil lubrication. This means that the plain bearings must be lubricated with grease or oil. A hole is provided on the plain bearing for this purpose. The embossed lubrication pockets can optimally absorb the lubricant (grease, oil).The plain bearing bushes are characterised by high wear resistance, low friction and good damping properties. The bushings are also insensitive to shocks. The low friction coefficients, good wear resistance and reliable load capacity of the bearing ensure suitable use in rotating and oscillating movements.The range of applications for plain bearing bushes extends to agricultural equipment, construction machinery, industrial trucks, lifting equipment, hydraulic cylinders and motors as well as steering knuckle bearings, steering gears, power steering and pedal bearings.