Vehicle construction

for 50 mm bandwidth, flexible, adapts optimally to the load, dimensions: 100 x 280 mm

For radiator hood, complete with bracket.

M10x1, for Steyr Plus series ~

Metal, with mounting holes 125x110mm

Total length 160 mm, ideal for attaching tarpaulins, nets, etc.

8 mm, gray, price per meter,incl. Cutting service

2 pieces each with 45, 60, 80 and 100 cm length.

Connection cable for cigarette lighter socket to cigarette lighter plugaccording to ISO 4165, length 4m, with integrated 8A fusee.g. Extension cable for rotating lights,...

Connection cable length 2m, according to ISO 4165, with on/off switch

galvanized, A:30mm, B:10mm

B:10mm

Inexpensive 103-piece eyelet assortment including assembly tools. Contents: 50 pieces of eyelets 10x20x6 mm, 50 pieces of eyelet washers 10x20x6 mm and 1 piece each of punch, anvil and impact punch

260 pieces, in a practical PVC case. Indispensable for everyday needs. Contents: Folding cotter pins, spring cotter pins, split pins, heavy-duty clamping sleeves, locking rings, sealing rings, tension springs, compression springs in various sizes.

Tensile load approx. 4300 kg, with bolt 18 mm and spring cotter pin.

Hot-dip galvanized, suitable for screwing onto frames or side walls.

15x41 mm, 10 pieces pack

11x36 mm, 10 pcs. pack.

for rear and license plate lighting 11x41 mm, pack of 10

Made from one piece, steel ST60. The drawbar is a connecting device on a tractor/tractor unit that is used to attach and pull implements or trailers. The drawbar is usually flexibly attached to the lower links of the three-point hydraulic system.  

With trailer ball pin 50mm and trailer towing hitch, anti-twist, field rail 932mm, 9 holes 28mm, not homologated (no StvO approval)With the field rail triangle Cat 2 you can attach attachments to your tractor/tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower link and the upper link.Lower link bolt: 28mm, upper link bolt: 25mmThe field rail triangle is delivered including bolts and linch pins.TOP price-performance ratio< /li>

Water filling and emptying fitting for tractor tiresfor 1/2" hoseFill your tractor/tractor tires with water quickly and easily. The Hanauer Maus makes it possible. The venting valve with internal thread and venting hose is screwed onto the tire valve. Via the hose nozzle of the filling fitting you can connect a 1/2 inch water hose.Why fill water into tractor tires?When working with the front loader, it can happen that the tractor loses grip on the rear axle. Instead of additional weights that put pressure on the rear axle, we recommend adding water to fill the tractor tires. The center of gravity shifts downwards due to the water in the tractor tires. This also reduces the risk of the tractor tipping over when driving diagonally on slopes.How is the Hanauer Maus used?First jack up the tractor and loosen the valve insert carefully with a valve screwdriver. Once the air has escaped, you can safely remove the valve insert. Now turn the tire until the valve is at around 11 o'clock. After you have inserted the ventilation hose into the valve body, screw on the Hanauer Maus. In the next step, attach the 1/2 inch water hose to the hose nozzle of the Hanauer Maus. Once the optimal level has been reached, you can fill the tractor tire with air. To do this, screw in a valve insert suitable for air and water. Empty tractor tires with the Hanauer MouseJack up your tractor and turn the wheel until the valve body is at the lowest point. Now remove the valve insert and let the water drain out. To completely empty the tractor wheel, take the Hanauer Maus and screw it onto the valve body. Now remove the hose nozzle and screw the valve insert into the internal thread of the Hanauer Maus. Now connect the compressed air tire inflator to press the remaining water out of the vent valve.How the Hanauer Maus worksWhile you are filling your tractor tire with water, the air can escape through the vent valve at the same time. As soon as water comes out of the opening, the filling process is complete. If the Hanauer Maus is removed, the required 25% air remains in the tire.