Hydraulic program

Lift indicator for hydraulic top links. The scale has a length of 300mm and is a self-adhesive film.

Stroke limitation of single-acting hydraulic cylinders before the end of the stroke. E.g.: tipping cylinders of truck bodies and agricultural. followers.

Standard filtration 90 micron.

Standard filtration 25 micron, with by-pass valvem 0.25 bar

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

Faster leakage oil drain housing TARV with different hole spacings with dust caps. The leakage oil drain connection is designed at 90. Colored markings can be ordered separately. You can find these under color clip.

Without sleeve, for BG 3 plug-in coupling sleeves with outer diameter 38 mm, including locking rings for attaching the sleeves.

BG 3/4 hole flange. The sleeve is fixed in the tear-off holder by a spring.

The temperature control is a system with an adjustable thermostat, without oil contact. The switching temperature can be adjusted using the rotary knob on the housing. Furthermore, the control can be based on the rail system. the oil air cooler series asa rail can be mounted. This allows the control to be flexibly pushed to a desired position and then tightened. The final wiring to the fan must be carried out individually by the customer.Housing material: sheet steel, powder-coatedInstallation position: anyAdjustable switching range: -30/+120CSwitching capacity C.1-10/2, 5)A/250V, C2-6(2.5)A/250Vmax. Head temperature: +85Cmax. Sensor temperature: +150C

Protection class IP67, thread G1/2", oil temperature range -20 to +100C. It is not possible to use the temperature sensor without fan control.

44 - 55C, G 1/2"~ without cable.

Switching temperature 50C, +/-5C, thread G1/2"

Switching temperature 50C, +/- 5C, thread G 1/2"~ without cable.

For volume regulation for a consumer in both flow directions.Max. Pressure 350 bar.