Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Agricultural machinery


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA5053
Holder 40,880,000 Holder 40,880,000

€9.49*
#106524
Holder for cooking and cultivating harrow tines Holder for cooking and cultivating harrow tines
Frame material: 50 x 30 Tine material: 32 x 12

€12.50*
Variants from €1.99*
#FA104937
Holder for diesel igniter Steyr T80 Holder for diesel igniter Steyr T80

Suitable for Steyr T80

€59.00*
#FA10943
ESM Holder for knife guide arm, bar back 12 mm Holder for knife guide arm, bar back 12 mm

Suitable for BUSATIS mower Bidux 1205

€38.00*
#FA1130
Holder for plug-in coupling plugs Holder for plug-in coupling plugs

BG 3. Serves to accommodate the uncoupled plug.Metal version - for welding

€3.49*
#FA7894
Holder for screwing on Holder for screwing on

On a horizontal cabin roof.

€9.95*
#FA48721
Holder for single tine Holder for single tine

Frame 40x40 mm.

€5.49*
#FA49332
Holder for track eradicator tine for frame 60x60mm Holder for track eradicator tine for frame 60x60mm

Holder for track eradicator tine for frame 60x60mm, tine material 40x10, 40x12, 40x14Includes screw set: 2 pieces M12x100 and 1 piece M16x50

€42.90*
#FA121984
Holder for track eradicator tine for frame 80x80mm Holder for track eradicator tine for frame 80x80mm

Holder for track eradicator tine for frame 80x80mm, tine material 40x10mm, 40x12mmIncludes screw set: 2 pieces M12x130 and 1 piece M16x50

€43.90*
#FA107881
Holder for track eradicator tine for frame 80x80mm Holder for track eradicator tine for frame 80x80mm

Holder for track eradicator tine for frame 80x80mm, tine material 32x10mm, 32x12mmIncludes screw set: 2 pieces M12x130 and 1 piece M16x50

€49.90*
#FA97759
Holder for wedge foldable Holder for wedge foldable

Metal, 285x180 mm

€44.90*
#18740
AL-KO Holder for wheel chock Holder for wheel chock
Version: UK36

Galvanized, for screwing on.

€9.95*
#18744
Holder plastic Holder plastic
Color: weiß

With 2 screw holes 6 mm.

€1.99*
#47766
Holder with reinforcement spring Holder with reinforcement spring
Frame material: 50 x 12 Tine material: 32 x 10, 32 x 12

€2.98*
#FA50855
Holding cam galvanized Holding cam galvanized

for eccentric lock 6043

€8.95*
#FA24581
Holding plate frame 50x50 Holding plate frame 50x50

suitable for stripping tine order no. 54480

€8.95*
#FA24579
Holding plate frame 80x80 Holding plate frame 80x80

suitable for stripping tine order no. 54480

€12.00*
#FA18569
Frank Original Holding plate, 92771 Holding plate, 92771

€24.90*
#FA7741
Hook cover Hook cover

€39.90*
#FA7747
Hook for claw Hook for claw

€27.90*
#FA99397
Hook front mask Steyr Plus Hook front mask Steyr Plus

Use: grille

€3.50*
#FA598
Hook screw M8 Hook screw M8

Hook screw M8 suitable for Busatis, Gebusa and Steyr mowers

€9.99*
#FA34091
Horn 12V Horn 12V

2 flat plugs 97 mm

€6.99*
#73717
Hose - loose for AS-Front Hose - loose for AS-Front
Dimension: 4.50/5.00-15

with straight valve TR15

€14.95*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.