Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA27579

OMT Filler neck Filler neck

Opening 48 mm, with longer sieve insert 150 mm

€19.90*

#FA68839

Filler screw with breather and filter Filler screw with breather and filter

Filler screw with breather and filter. Screw-in thread M18x1.5mm with O-ring seal. Outer 42.5 mm. Prevents foreign bodies from entering and transmission or hydraulic oil from escaping. The filler plug can be loosened by hand without tools.

€2.99*

#FA24659

Filling profile to sealing profile Filling profile to sealing profile

Suitable for item no. 24654 &~ 99078

€2.65*

#FA24498

Filter complete Filter complete

aluminum casing

€54.95*

#1778

OMT Filter element for pipe installation, max. working pressure 10 bar Filter element for pipe installation, max. working pressure 10 bar

AR (inch): 1 1/4 B (mm): 133 C (mm): 210 E (mm): 50 F (mm): 29 Flow rate (l/min): 150 Length (mm): 241 Thread: R 1 1/4 Zoll Ø outside (mm): 132

Standard filtration 25 micron, with by-pass valve, 1.7 bar

Variants from €21.90*

€37.00*

#1831

OMT Filter element for tank installation, max. working pressure 8 bar Filter element for tank installation, max. working pressure 8 bar

AR (inch): 3/4 B (mm): 34 C (mm): 29 D (mm): 213 E (mm): 30 F (mm): 86 Flow rate (l/min): 100 H (mm): 67 I (mm): 115 L (mm): 9 Length (mm): 213 Thread: R 3/4 Zoll Ø outside (mm): 86

Standard filtration 10 micron, with by-pass valve, 1.7 bar

Variants from €11.00*

€14.90*

#FA41772

Schröckenfux finger plate finger plate

Suitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

€2.65*

#FA7769

Schröckenfux Finger plate Aebi Finger plate Aebi

serratedSuitable for AEBI Type A33, A35, A41 center cut and A71, A73, A81, AM9, AM20.

€2.69*

#FA7773

Schröckenfux Finger plate FS882 Finger plate FS882

Suitable for Bucher M500, M550, Record

€2.69*

#FA7698

ESM Finger screw M10x40 with square head 20x11mm, without nut Finger screw M10x40 with square head 20x11mm, without nut

Finger screw M10x34mm with square head 20x11mm without nut

€4.29*

#FA1994

ESM Finger screw SS001 M10x25 Finger screw SS001 M10x25

€2.95*

#FA1995

ESM Finger screw SS001 M10x35 Finger screw SS001 M10x35

€2.95*

#FA7697

ESM Finger screw/shoe screw M10x35 square head 20x11mm, without nut Finger screw/shoe screw M10x35 square head 20x11mm, without nut

Finger screw M10x34mm with square head 20x11mm without nut.Suitable for AEBI Type A33, A35, A41 middle cut.Suitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.Suitable for BUSATIS double knife mower BM321KW .Suitable for Vogel and Noot Plus 1, 3, 4 center cut

€4.85*

#4210

Flail knife JF Flail knife JF

Ø: 13

Flail knife suitable for JF SH160, 2129-234X, without holder and screw

€11.50*

#FA30636

Flail knife suitable for Eberle embankment mowers, Ferri, Fendt, Agricom, Howard Flail knife suitable for Eberle embankment mowers, Ferri, Fendt, Agricom, Howard

€5.39*

#FA33337

Flail knife suitable for Ferri embankment mower Flail knife suitable for Ferri embankment mower

40x105x8mm.

€3.75*

#FA39944

Flail knife suitable for Ferri embankment mower Flail knife suitable for Ferri embankment mower

40x85x8mm.

€3.39*

#FA48708

Flail knife suitable for Ferri embankment mower, humus Flail knife suitable for Ferri embankment mower, humus

€5.39*

#FA17320

Flail knife suitable for Kirchner, Pegoraro Flail knife suitable for Kirchner, Pegoraro

€8.59*

#FA64975

Flail knives suitable for Kirchner, Kuhn, Nobili, Vogel & Noot Flail knives suitable for Kirchner, Kuhn, Nobili, Vogel & Noot

€7.29*

#FA108341

Flame glow plug MF pluggable Flame glow plug MF pluggable

Screw-in thread: 7/8"~ UNF

€19.95*

#FA108340

Flame glow plug MF screwable Flame glow plug MF screwable

Screw-in thread: 7/8"~ UNF

€19.95*

#55170

Flange bearing housing 2-hole UCFL complete with bearing Flange bearing housing 2-hole UCFL complete with bearing

A (mm): 148 B (mm): 80 Bore (mm): 30 E (mm): 117 L (mm): 31 S (mm): 16 Z (mm): 40,2

Variants from €9.99*

€12.80*

#55177

Flange bearing housing 4-hole UCF complete with bearing Flange bearing housing 4-hole UCF complete with bearing

A (mm): 137 Bore (mm): 45 E (mm): 105 L (mm): 38 S (mm): 16 Z (mm): 52,2 Ø shaft (mm): 45

Variants from €9.99*

€22.90*

Seite 50 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery