Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#34452

iQparts Coulter blade 20' SB56 Coulter blade 20' SB56

Version: right can be used instead of Lemken: 335.2034, 335.2134

Variants from €40.90*

€40.90*

#55529

Frank Original Coulter blade 285 mm Coulter blade 285 mm

Version: right can be used instead of Pöttinger: 966.050.031.0

suitable for Landsberg-Pttinger, Einbck

Variants from €23.90*

€23.90*

#FA34401

iQparts Coulter blade 345 mm, left Coulter blade 345 mm, left

suitable for Lemken series Smaragd

€19.90*

#FA34400

iQparts Coulter blade 345 mm, right Coulter blade 345 mm, right

suitable for Lemken series Smaragd

€19.90*

#FA18570

Frank Original Coulter blade on the left Coulter blade on the left

for working width 380 mm, 92521

€15.50*

#FA18565

Frank Original Coulter blade on the left for a working width of 470 mm, 92537 Coulter blade on the left for a working width of 470 mm, 92537

€15.90*

#FA18571

Frank Original Coulter blade on the right Coulter blade on the right

for working width 380 mm, 92520

€15.50*

#FA18566

Frank Original Coulter blade on the right for a working width of 470 mm, 92536 Coulter blade on the right for a working width of 470 mm, 92536

€15.90*

#FA52148

Coulter GG3 for ZK cultivators Coulter GG3 for ZK cultivators

€15.00*

#FA26140

Coulter straight 35x5x135 Coulter straight 35x5x135

Coulter suitable for Germinator Gare tines, straight version.

€1.79*

#FA4785

Coulter straight 40x6x215 mm Coulter straight 40x6x215 mm

€3.70*

#FA48699

iQparts Coulter tip, old model Coulter tip, old model

Suitable for Landsberg-Pttinger, Einbck, Vogel and Noot

€26.90*

#FA125350

Counter blade left serrated instead of Rapid 96565 Counter blade left serrated instead of Rapid 96565

Counterblade on the left for Rapid motor mowers with belt grassing.

€82.00*

#FA125349

Counter blade right serrated instead of Rapid 253029 Counter blade right serrated instead of Rapid 253029

Counterblade on the right for Rapid motor mowers with belt grassing.

€82.00*

#FA5496

Counter hook offset to ZB05 Counter hook offset to ZB05

Can be used right/left, length 145 mm.

€2.25*

#FA11495

Counter plate for lashing ring Counter plate for lashing ring

95x100mm

€3.80*

#FA11500

Counter plate for lashing ring Counter plate for lashing ring

150x125mm

€5.70*

#FA5498

Counterhook Counterhook

Can be used right/left

€2.20*

#FA61689

ESM Countersunk rivet assortment for ESM beams, 160 pieces Countersunk rivet assortment for ESM beams, 160 pieces

Contents: 40 pieces 5x12 mm, 40 pieces 5x17 mm, 40 pieces 5x20 mm, 20 pieces 6x20 mm, 20 pieces 6x25 mm

€19.50*

#73523

Schröckenfux Countersunk rivets according to DIN661 Countersunk rivets according to DIN661

Piece: 200 Size (mm): 5 x 18

When harvest time comes around, every minute counts. A loose blade means downtime and unclean cuts. Our countersunk rivets in accordance with DIN 661 are specially designed for the extreme shear forces and vibrations involved in riveting mower blades. The solid rivets are made of high-quality steel and can withstand the constant stress caused by stone chips, harvested material and vibrations. Easy to use: a precise drill hole is all that is needed. The upsetting of the shaft creates a vibration-proof, force-fit connection that can withstand even extreme loads.The countersunk rivets are supplied in packs of 200. From a diameter of 8 mm, the packs contain 100 rivets.

Variants from €1.29*

€19.00*

#FA43475

Countersunk screw M12x25 Countersunk screw M12x25

Countersunk head screw with hexagon socket M12x25, quality 8.8

€0.59*

#FA57028

Schröckenfux Countersunk screw M8x12 Countersunk screw M8x12

630605E, 1 piece per knife

€1.00*

#FA104676

Countersunk screw with hexagon socket M16x2 Countersunk screw with hexagon socket M16x2

Countersunk screw with hexagon socket M16x2, strength 10.9Hexagon socket screw with countersunk head suitable for various knife attachments on feed mixer wagons.

€1.90*

#FA25366

Coupler 64 mm for Steyr Coupler 64 mm for Steyr

Length: 64mm

€14.95*

Seite 33 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery