Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA129178

Compression spring assortment 45-piece Compression spring assortment 45-piece

Length: 150mm, spring diameter: 8-25mm, wire diameter: 0.9-3.25mm

€46.90*

#FA51934

Compression spring assortment, 20 pieces. Wire thickness 0.4-2mm Compression spring assortment, 20 pieces. Wire thickness 0.4-2mm

3 - 20 mm, length 200 mm.

€34.50*

#FA115444

Compression spring for handbrake lever for Steyr T80 Compression spring for handbrake lever for Steyr T80

Compression spring for handbrake lever for Steyr: T180, T80Length: 30mm, diameter: 17mm

€3.99*

#FA115407

Compression spring for starter button for Steyr T80 Compression spring for starter button for Steyr T80

Compression spring for starter button for Steyr: T80, T84, T86, T180aItem no. 98

€4.50*

#FA7729

Compression spring for swath board Compression spring for swath board

Compression spring suitable for the fastening screws of the swath plate. Length 35mm, outer diameter 28mm, spring thickness 5.8mm

€6.00*

#FA4134

Compression spring for swath plate Compression spring for swath plate

Compression spring suitable for the fastening screws of the swath plate. Length 36mm, outer diameter 20mm, spring thickness 4mm

€3.39*

#FA48648

Compression spring for swath plate, L = 47 mm Compression spring for swath plate, L = 47 mm

Compression spring suitable for the fastening screws of the swath plate. Length 47mm, outer diameter 22mm, spring thickness 4mm

€8.50*

#18575

Compressor fin for Battioni and Pagani Compressor fin for Battioni and Pagani

Version: MEC 3000

Battioni &~ Pagani. ~

Variants from €8.90*

€12.50*

#115648

Cone blank, unprocessed Cone blank, unprocessed

A (mm): 200 B (mm): 70 Length (mm): 220 Nominal size: DN200

Blank, black unprocessed

Variants from €9.39*

€30.90*

#FA123580

Cone nut M16x1.5 instead of Aebi, BCS and Reform 580.58661.0 Cone nut M16x1.5 instead of Aebi, BCS and Reform 580.58661.0

Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.

€3.00*

#FA99371

Cone pin for cutter head instead of Aebi AM167/4 Cone pin for cutter head instead of Aebi AM167/4

Cone spigot suitable for Aebi cutterhead with clamping claw and for the cutterhead for ESM municipal and universal beams. The spigot has an M10 internal thread and the cone has a diameter of 16 - 18 mm.

€16.95*

#130112

Cone reducer connection 10/08 Cone reducer connection 10/08

Designation: RED08/06PL Ø tube (mm): 08/06

Variants from €4.00*

€4.00*

#FA43476

Cone ring for knife holder attachment Cone ring for knife holder attachment

Suitable for countersunk head screw M12x25, Faie No. 43475. Can be used on drum mowers from Claas, Deutz-Fahr, Fella, Kuhn and Pttinger.

€2.69*

#FA116066

Cone screw M8x1x19, SW14 Cone screw M8x1x19, SW14

Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.

€8.39*

#FA107996

Cone screw M8x1x21, SW13 Cone screw M8x1x21, SW13

Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.

€11.95*

#FA97946

Connecting line for oil pressure gauge to Steyr straight Connecting line for oil pressure gauge to Steyr straight

Connection thread: M10x1

€36.90*

#52074

Connecting link ASA Connecting link ASA

Type: ASA 60-1

Variants from €1.20*

€1.99*

#FA7575

connecting plate connecting plate

€59.90*

#FA108619

Connecting rod bearing pair Std. T80-T280 Connecting rod bearing pair Std. T80-T280

Diameter: 75mm

€59.95*

#FA110445

Connecting rod bearing set standard Steyr WD311, 411, 611 Connecting rod bearing set standard Steyr WD311, 411, 611

Scope of delivery: 4 pairs (=1 set)Inner diameter: 66 mmDesign: standard

€82.50*

#FA119375

Connecting rod bearing setSTD Steyr WD306 Connecting rod bearing setSTD Steyr WD306

Connecting rod bearing set standard size, set consists of 4 pairs,inner diameter: 60mm ~

€64.95*

#FA119380

Connecting rod screw for Steyr Plus Connecting rod screw for Steyr Plus

Thread: M10x1 ~Length: 61.5 mm

€12.50*

#75127

Connection cable Connection cable

Length (m): 8

with 7-pin plug and 5-pin bayonet

Variants from €32.95*

€49.95*

#20295

Connection cable 12 V Connection cable 12 V

Length (m): 3

Cable cross section 7x1.5 mm with 1 plug and 1 coupling socket, 7-pin, plastic.

Variants from €19.95*

€19.95*

Seite 25 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery