Agricultural machinery

three-stage with additional adjustment range (H), 2 lifting speeds

​Swath plate left for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

​Swath plate right for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.

Suitable for Bema, Binderberger, Saphir, Tuchel and many other sweepers. Trim: 0.7 / 1.7x3 = mixed trim e.g. with corrugated wire 0.7mm and polypropylene 1.7x3mm.

Suitable for Bema, Binderberger, Saphir, Tuchel and many other sweepers. Trim: PPN 1.7x3 = polypropylene trim with fiber thickness 1.7x3mm.

Swing bolt complete for Busatis/ESM double knife mowers with horizontal swing arm drive.The swing bolt is screwed onto the rocker arms. By connecting the bearing housings to the drive, the rocker arms are moved forwards and backwards. This results in the upper knife moving in opposite directions to the lower knife and this ensures a clean cut.

with switch lighting when used with order no. 21735

with switch lighting when used with order no. 21735

with switch lighting when used with order no. 21735

with switch lighting when used with order no. 21735

Ausführung: 4 Gang

Ausführung: 3 Gang

Verwendung: Gruppenschaltung

Version with 4 switching positions ~

with switch lighting when used with order no. 21735

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

Use: for the powershift HL

For converting the mechanical locking to a hydraulic locking of the implements with a double-acting cylinder. Including 1.5 m hose, connection M18x1.5/12L union nut.In conjunction with guide no. 103099 (see accessories) you can attach this conversion kit to any quick-change frame. The installation length L(min) is 714mm. With the stroke of 150mm, the maximum length L(max) is 864mm. The locking bolt has a diameter of 20mm.We would like to point out that the hydraulic control circuit for the locking cylinder has a flow rate of 10-15L/min. and the maximum pressure should be limited to 160bar.