Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#52305

Straight connection - heavy row Straight connection - heavy row

Designation: GZ16S Series / pipe Ø: 16S Thread: M 24 x 1,5 Ø outer tube (R): 16 mm

€8.49*

Flanschstutzen gerade mit Gewinde verzinkt

#102874

Straight flange socket with galvanised thread Straight flange socket with galvanised thread

Hole spacing (mm): 150 x 150 Length (mm): 230 Size (inch): 2 1/2"

Straight flange socket with external thread, galvanized version. Can be used as a transition from a manure slider with an internal thread to a flange connection from a quick coupler or another piston slider.Hole pattern flange: 150x150mm with 2" - 6" threadHole pattern flange: 180x180mm with 8" thread

€69.00*

Variants from €54.00*

Gerade Einschraubverschraubung, Withworth - Rohrgewinde

#12513

Straight male fitting, Withworth pipe thread, heavy range Straight male fitting, Withworth pipe thread, heavy range

Designation: GE16S R3/4 G (inch): 3/4 Series / pipe Ø: 16S Thread: M 24 x 1,5

€8.90*

Variants from €3.89*

Einschrauber ohne Schneidring und Überwurfmutter, BSP Einschraubgewinde und Weichdichtung

#77965

Straight male stud coupling without coupling ring and nut, BSP thread and soft seal Straight male stud coupling without coupling ring and nut, BSP thread and soft seal

G (inch): 1/2 Series / pipe Ø: 15L Thread: M 22 x 1,5

Straight male stud coupling without cutting ring and nut. The screw-in thread is a BSP Withworth thread in cylindrical design. The seal between the fitting and the screw-in housing is provided by a soft seal.

€2.99*

#24252

Straight reduction Straight reduction

Designation: GR10/08PL

€3.59*

Variants from €2.99*

#5682

Straight screw connection Straight screw connection

Designation: G08PL Series / pipe Ø: 8L Thread: M 14 x 1,5 Ø outer tube (R): 8 mm

€2.95*

#46089

Straight screw connection - heavy series Straight screw connection - heavy series

Designation: G12S Series / pipe Ø: 12S Thread: M 20 x 1,5 Ø outer tube (R): 12 mm

€5.39*

#4790

Straight screw connection, metric thread Straight screw connection, metric thread

Designation: GE12PL M22x1,5 G (Divers): M22x1,5 Series / pipe Ø: 12L Thread: M 18 x 1,5

€5.49*

Variants from €2.59*

#5631

Straight screw fitting, Withworth pipe thread Straight screw fitting, Withworth pipe thread

Designation: GE18PL R3/4 G (inch): 3/4 Series / pipe Ø: 18L Thread: M 26 x 1,5

€8.79*

Variants from €2.49*

Gerade Aufschraubverschraubung, Withworth-Rohrgewinde

#101209

Straight screw fitting, Withworth pipe thread Straight screw fitting, Withworth pipe thread

Designation: GAi12L-1/4" Series / pipe Ø: 12L Thread: M 18 x 1,5 Thread inside: R 1/4

€13.95*

Variants from €2.99*

Gerade Einschraubstutzen mit Withworth-Rohrgewinde

#994

Straight screw-in sockets, Withworth pipe thread Straight screw-in sockets, Withworth pipe thread

G (inch): 3/8 Series / pipe Ø: 12L Thread: M 18 x 1,5

€4.29*

Variants from €3.19*

#FA5051

Straw knife suitable for Taarup, Ugerlose Straw knife suitable for Taarup, Ugerlose

€6.95*

Hubanzeige 300mm für hydraulische Oberlenker

#FA116893

Stroke indicator 300mm for hydraulic top links Stroke indicator 300mm for hydraulic top links

Lift indicator for hydraulic top links. The scale has a length of 300mm and is a self-adhesive film.

€2.65*

#1198

Stroke limiter Stroke limiter

Series / pipe Ø: 15L Thread: M 22 x 1,5

Stroke limitation of single-acting hydraulic cylinders before the end of the stroke. E.g.: tipping cylinders of truck bodies and agricultural. followers.

€41.90*

#FA24409

Strong steering handle Strong steering handle

Suitable for all tractors (tractors) with a curved steering wheel, 30. Complete with plate and screws.

€9.50*

Stopfbuchse 20x27x8mm zu MZ Gülleschieber

#FA4248

Stuffing box 20x27x8mm for MZ manure scraper Stuffing box 20x27x8mm for MZ manure scraper

Stuffing box seal 20x27x8mm for the slide rod of the manure slider with mechanical manual operation. 2 pieces are required for sealing.

€0.50*

#62040

Stuffing box nut with grease nipple Stuffing box nut with grease nipple

Length (mm): 40 Thread: M 30 x 2,0 Version: zu 4 Zoll Gülleschieber Ø inside (mm): 20

For use on sliders with lever set.

€9.59*

#18783

OMT Suction filter 90 micron for tank installation Suction filter 90 micron for tank installation

B (mm): 105 C (mm): 46 CH (mm): 30 Flow rate (l/min): 22 Thread A: R 1/2 Zoll

Standard filtration 90 micron.

€14.90*

#1775

OMT Suction filter for pipe installation Suction filter for pipe installation

C (mm): 212 Flow rate (l/min): 80 Length (mm): 234 Thread: R 3/4 Zoll Ø outside (mm): 98

Standard filtration 25 micron, with by-pass valvem 0.25 bar

€59.00*

Variants from €45.90*

Ansaugfilter PVC für Zapfwellenpumpe MT300

#FA24464

Suction filter PVC for PTO pump MT20/25 Suction filter PVC for PTO pump MT20/25

With double crossed relief networking. Hose connection 30 mm, height 60 mm, outer 140 mm.

€7.99*

#FA54500

Suction filter PVC for PTO pump MT300 Suction filter PVC for PTO pump MT300

Hose connection 40 mm, height 96 mm, outer 150 mm.

€8.95*

#FA62595

Suction nozzle ball DN150 Suction nozzle ball DN150

Hose connection 150 mm, to quick coupler

€49.90*

#FA17340

Suction nozzle ball DN159 Suction nozzle ball DN159

Hose connection 125 mm

€51.90*

#FA62597

Suction nozzle ball DN159 Suction nozzle ball DN159

Hose connection 150 mm

€59.00*

Seite 159 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery