Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Agricultural machinery


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#64166
iQparts Skimmer share Skimmer share
Version: left can be used instead of Pöttinger: 921.02.158.0

€20.90*
#16029
Frank Original Skimmer share Skimmer share
Version: left can be used instead of Pöttinger: 1903696, 921.04.118.0

€17.00*
#13556
Skimmer share Skimmer share
Version: right can be used instead of Kverneland: 066868

€14.90*
#75021
Frank Original Skimmer share instead of Rabe SDG-18B, L=195mm Skimmer share instead of Rabe SDG-18B, L=195mm
Version: right can be used instead of Rabe: 2715.0501

Skimmer share suitable for Lemken SDG-18B with back length L=195mm and hole spacing LA=60mm.

€24.99*
#38249
Frank Original Skimmer share old version for nose screw Skimmer share old version for nose screw
Version: left

€17.00*
#53243
Skimmer share small Skimmer share small
Version: left can be used instead of Kverneland: 066873

€12.00*
#FA107128
Slanted base for MF Slanted base for MF

suitable for MF lights, hole spacing base: 135mm, hole spacing for light: 45mm ~

€8.90*
#FA8627
Sleeve for brake line Sleeve for brake line

M18x1.5 internal thread, supplied with steel dust protection.

€17.90*
#FA46201
Sleeve for multi-coupling Sleeve for multi-coupling

6-pin for electrical cable entry on the device side.

€65.00*
#FA29579
VOSWINKEL Sleeve suitable for Unimog and MB-Trac Sleeve suitable for Unimog and MB-Trac

with zinc die-cast sleeve and push-pull designSleeve with nose M22x1.5 IT

€25.90*
#FA29581
VOSWINKEL Sleeve suitable for Unimog and MB-Trac Sleeve suitable for Unimog and MB-Trac

with zinc die-cast sleeve and push-pull designSleeve with hinged cover M22x1.5 IT

€29.00*
#FA167
iQparts Slide plate P58.009.01 Slide plate P58.009.01

Suitable for plow bodies M300, M350, U10, U13, U15, UN300, UN350, UN400, UN430, UST400, W25, W35, W300, WS13, WSU350, WS350, WY350, WS400, WY400, Y25

€49.90*
#FA3255
iQparts Slide plate P58.011.01, thickness 12 mm Slide plate P58.011.01, thickness 12 mm

for plow bodies M300, M350, U10, U13, U15, UN300, UN350, UN400, UN430, UST400, W25, W35, W300, WS13, WSU350, WS350, WY350, WS400, WY400, Y25

€19.90*
#35088
Slide ring Walterscheid Slide ring Walterscheid
Type: SC05/SD05

€5.80*
#FA50854
Sliding block for welding on Sliding block for welding on

45x150 mm, bolt 16 mm

€35.85*
#FA9349
Sliding pin for 1 3/8 x 6 profile Sliding pin for 1 3/8 x 6 profile

Walterscheid, new version

€20.75*
#FA25347
Sliding pin for 1 3/8 x 6 profile Sliding pin for 1 3/8 x 6 profile

Walterscheid, old version

€20.75*
#FA41829
Sliding sole Sliding sole

€54.90*
#FA7683
Sliding sole for inner shoe Sliding sole for inner shoe

€67.00*
#FA7706
Sliding sole for outer shoes Sliding sole for outer shoes

€92.00*
#1177
Slurry compressor MEC with gearbox and pressed lubrication Slurry compressor MEC with gearbox and pressed lubrication
Power max.: 4350 L/min Version: MEC 4000

Battioni &~ Pagani vacuum pumps of the MEC series with transmission gears. The drive takes place via a cardan shaft with a maximum speed of 600 rpm. The ideal working speed is between 400 and 500 rpm.The slurry compressors are equipped with pressed lubrication, in which the required amount of lubricating oil can be manually adjusted using a drip oiler. The drip oiler is included in the scope of delivery and is roughly adjusted to the performance of the compressor at the factory. The setting should definitely be checked during operation and, if necessary, readjusted according to the information in the operating instructions.The scope of delivery includes: ~ ~ ~PTO shaft protection ~  ~ ~Drip oiler ~ ~ ~Oil lines ~ ~ ~Operating and maintenance instructionsThe pressure relief valve is not included in the scope of delivery!

€1,525.00*
Variants from €1,295.00*
#7459
Slurry hose for drag hose distributor Slurry hose for drag hose distributor
Bending radius (mm): 155 Operating pressure (bar): 4,50 Thickness (mm): 3,70 Weight / m: 0,55 kg Ø inside (mm): 38

PVC suction and pressure hose with shockproof hard PVC spiral and smooth inner surface. Temperature range -25C to 55C. Vacuum up to 7m H2O water column. Color green, price per meter.

€11.00*
#53247
Frank Original Smooth coulter disc suitable for Kverneland Smooth coulter disc suitable for Kverneland
can be used instead of Kverneland: 56112 Ø: 450

Smooth coulter disc suitable for Kverneland from European production. With 3 holes for attachment to the six-disc bearing. The hole circle diameter is 80mm and the center hole has a diameter of 55.5mm.

€59.90*
#FA40066
Socket � 12 x � 20 x 25 mm Socket � 12 x � 20 x 25 mm

€1.49*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.