Browse through our special offers and discover lots of great items at attractive prices!
Go to homepage

einfach besser Landwirtschaften
€0.00Test

Agricultural machinery

Agricultural machinery spare parts

Hydraulic program

Vehicle construction

Tractor parts

Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA125081
Silo tine 810mm, square profile, instead of Bressel & Lade 70400812 Silo tine 810mm, square profile, instead of Bressel & Lade 70400812

Offset silo tine with a length of 810 mm and square profile. The conical nut M22x1.5 mm is included.

€42.90*
#FA31143
Silo tine 815mm suitable for Baas-Trima and Parmiter Silo tine 815mm suitable for Baas-Trima and Parmiter

The silo removal tines are made of spring steel 55Si8 and C45 and come with a quality guarantee. All tines are delivered with a conical nut.

€59.90*
#FA24497
Simple filter Simple filter

M14x1.5mm

€55.00*
#FA48720
Simple stripping tine for heavy cultivators Simple stripping tine for heavy cultivators

€8.40*
#FA106414
Single coupling for Steyr Plus with hub Single coupling for Steyr Plus with hub

Version with hub

€599.00*
#FA7690
Single finger N 19, N 19V, N 19VT Single finger N 19, N 19V, N 19VT

€25.00*
#FA99111
Single finger plate instead of BCS 565.50649 Single finger plate instead of BCS 565.50649

Single finger plate for BCS mowers in the 94 EUROPA series. These mowers can be found on Aebi, BCS mowers in the 600 and 700 series, as well as on Reform motor mowers in the 600 and 700 series.

€14.50*
#FA7674
Single finger, thread M10 Single finger, thread M10

€25.00*
#FA34618
Indemar Single lever to operate 1 hydraulic circuit Single lever to operate 1 hydraulic circuit

Control lever for universal use in agricultural technology and industry. Simple and cost-effective solution as several individual housings can be connected to each other.Suitable for Indemar heavy-duty Bowden cables with fork head. The stroke is +/- 12.5mm.Delivered complete with lever, bolt and clip for attaching the Bowden cable to the lever and cover cap for the mounting opening.

€47.00*
#66754
Single nozzle body QJ17560A for pipelines Single nozzle body QJ17560A for pipelines
for pipe: 1/2 Zoll Ø inside (mm): 1/2" Ø outside (mm): 20,9-22,0

Available for 20 mm, 25 mm, 1/2?, 3/4? and 1? pipe.ChemSaver diaphragm check valve for drip-free shut-off. Standard diaphragm opens at 0.7 bar (10PSI).Membrane made of EPDM as standard, optionally made of Viton.Mounted via a 9.5 mm (3/8?) hole in the pipe.

€6.50*
#28626
Single pipe clamp Single pipe clamp
Ø tube (mm): 12

With 2 clamp halves, welding plate, hexagon socket screw.

€2.35*
Variants from €2.16*
#53485
Siphon protection with straight connection Siphon protection with straight connection
Ø (mm): 60

The siphon protection is used to protect the slurry compressor against the suction of slurry if there is no overflow protection or if it is out of order.

€179.00*
Variants from €159.00*
#56796
Six-disc bearing Six-disc bearing
can be used instead of Kverneland: 60624 Ø: 30

€99.00*
-33 %
#FA125856
Frank Original Skid instead of Kuhn K6805620 Skid instead of Kuhn K6805620

Skid suitable for Kuhn disc mower type FC and GMD. The skid is painted, tempered and hardened.

€19.99* €29.90* (33.14% saved)
#FA124840
Frank Original Skid instead of P�ttinger 397.60.240.0 Skid instead of P�ttinger 397.60.240.0

Skid skid suitable for Pttinger disc mowers NovaAlpin, NovaCAT and NovaDisc. The skid is painted, hardened and tempered.

€59.90*
#FA124842
Frank Original Skid on the left instead of P�ttinger 397.60.245.0 Skid on the left instead of P�ttinger 397.60.245.0

Skid skid suitable for Pttinger NovaCAT disc mower. The skid is painted, hardened and tempered.

€59.90*
#FA124841
Frank Original Skid on the right instead of P�ttinger 397.60.243.0 Skid on the right instead of P�ttinger 397.60.243.0

Skid skid suitable for Pttinger NovaCAT disc mower. The skid is painted, hardened and tempered.

€59.90*
#FA50028
Frank Original Skids suitable for Claas Skids suitable for Claas

Skid skid suitable for Claas DISCO, DIRECT DISC and COUGAR disc mowers.

€42.90*
#FA50029
Frank Original Skids suitable for P�ttinger Skids suitable for P�ttinger

Skids suitable for disc mowers

€32.90*
#2494
iQparts Skimmer moll sheet Skimmer moll sheet
Version: left

€37.90*
#52169
iQparts Skimmer S190 Skimmer S190
Version: left can be used instead of Lemken: 336.3721

€11.50*
#52170
Frank Original Skimmer S270 Skimmer S270
Version: right can be used instead of Lemken: 336.3710

Replaces ~ Skimmer share S260

€14.90*
#57161
Frank Original Skimmer SDG-14/16 Skimmer SDG-14/16
Version: right can be used instead of Rabe: 2742.0201

€15.90*
#61028
Frank Original Skimmer SDG-181, length 160 mm Skimmer SDG-181, length 160 mm
Version: left can be used instead of Rabe: 2715.0102

€12.90*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.
- Imprint