Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#6929

Share screw with oval head Share screw with oval head

C (mm): 7 G (Divers): 13,6 mm M (mm): 8 S (mm): 17 X: 20 ° Ø A (mm): 15,95 Ø x length (M): M10x25

Matching Frost, Kverneland, Raven, Regent, Bird &~ Noot

€1.00*

Variants from €0.71*

#1270

Share screw with oval head Share screw with oval head

C (mm): 7 G (Divers): 17 mm M (mm): 11 S (mm): 22 Ø A (mm): 18 Ø x length (M): M14x34

suitable for Kverneland, Regent, Vogel &~ Noot

€1.40*

#FA8097

Share screw with square attachment DS6006 Share screw with square attachment DS6006

€1.15*

Scharschraube mit Vierkantansatz, DIN 608

#112042

Share screw with square neck, DIN 608 Share screw with square neck, DIN 608

M (mm): 8 S (mm): 17 Strength: 10.9 V (mm): 10 Ø D (mm): 19 Ø x length (mm): M10x60

Share screw with square shoulder according to DIN 608

€1.19*

Variants from €0.49*

#123884

Share screws with 2 lugs ISO5713 Share screws with 2 lugs ISO5713

Ø x length (mm): M14x35

Suitable for Ferguson, Huard, Krone, Kuhn, verum

€1.29*

Variants from €0.85*

#47732

Frank Original Share tip B2SP coated Share tip B2SP coated

Version: right can be used instead of Lemken: 336.4150

€45.00*

Scharspitze zu Flügelschar Grubber Synchro 3003

#FA65095

Frank Original Share tip for wing share cultivator Synchro 3003 Share tip for wing share cultivator Synchro 3003

€16.90*

#46463

Frank Original Share tip reversible 35WSS Share tip reversible 35WSS

Version: right can be used instead of Pöttinger: 925.26.011.0

Hole spacing 110 mm

€21.90*

#FA8069

Share tip S12D Share tip S12D

The S12D coulter tip, suitable for Lemken Smaragd and Vogel & Noot TerraFlex

€14.95*

#FA34397

iQparts Sharpfoot Sharpfoot

suitable for Lemken series Smaragd

€32.90*

#9849

AL-KO Sheath for brake cable Sheath for brake cable

Length (mm): 2300

€29.85*

Content: 2.3 m (€12.98 / 1 m)

#FA117985

Shift gate for Steyr T80 shift lever Shift gate for Steyr T80 shift lever

Version: blackenedMostly defective when two gears are shifted at the same time

€66.95*

#FA101254

Shift handle 1-4 Steyr Shift handle 1-4 Steyr

Shift handle 1-4

€9.20*

#FA24894

Shift handle for Steyr Shift handle for Steyr

Version: R, VS, VN,

€8.50*

#FA117984

Shift handle/shift button for Steyr T80 Shift handle/shift button for Steyr T80

Outer diameter: 45mm

€8.50*

#FA24892

Shift lever for gears 1-4 Shift lever for gears 1-4

Version: 1-4 gears

€14.95*

#FA53070

ESM Shoe plate 321.2490 Shoe plate 321.2490

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€10.50*

#FA53157

Schröckenfux Shoe plate right, 1 hole Shoe plate right, 1 hole

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€3.50*

#FA53137

Shoe plate right, 2 holes Shoe plate right, 2 holes

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€3.59*

#FA41777

Schröckenfux Short strip, L=225 mm Short strip, L=225 mm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€10.90*

#FA25019

Shut-off valve Shut-off valve

Use: for heating

€110.00*

#FA115416

Sicherungsblech für Überwurfmutter zu Steyr T80 Sicherungsblech für Überwurfmutter zu Steyr T80

Sicherungsblech für Überwurfmutter zu Steyr: T80, T84, T86, T180Pos.Nr 46

€9.99*

#776

Side distributor nozzle, spreading width 11 m Side distributor nozzle, spreading width 11 m

B (mm): 150 Ø D (mm): 55 Ø nozzle (mm): 45

With the special side distribution nozzle, the manure fan covers a width of 11 m and hits the ground at a distance of 2 m - 13 m from the center of the barrel. Therefore, there is no path pollution.

€165.00*

#53364

Side nozzle 90° Side nozzle 90°

D (mm): 130 Nominal size: DN100

With ball and ring.4 inch = DN100, ball outside diameter D = 130 mm5 inch = DN120, ball outside diameter D = 150 mm6 inch = DN150, ball outside diameter D = 180 mm8 inch = DN200, ball outside diameter D = 243 mm

€56.90*

Seite 147 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery