Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Obermesserkopf komplett bidux-System anstelle ESM 247.2720

#FA75439

ESM Set knive head for top knife bidux-System to replace ESM 247.2720 Set knive head for top knife bidux-System to replace ESM 247.2720

Knife head, complete with fixing screws, ball joints and pivot pins for the bidux double-blade system. Suitable for double-blade mowers from Aebi, ESM, IBEX and Köppl. The knife head is secured to the upper blade using the screws included in the set. This means the knife head for the top knife can be used interchangeably on several blade sets.

€209.00*

#FA115427

Set screw with slot for Steyr T80 Set screw with slot for Steyr T80

Set screw with slot for Steyr: T80, T84, T86, T180 partlyPos.No. 13a

€3.20*

#FA37738

Shackle 52x48 mm, � 11 mm Shackle 52x48 mm, � 11 mm

€7.00*

#FA102331

Shackle turned 80x48.5mm, � 11mm Shackle turned 80x48.5mm, � 11mm

Twisted shackle 80x48.5mm, 11mm, suitable for Mulag

€9.29*

#51798

Shaft seal ASL with dust lip Shaft seal ASL with dust lip

A (mm): 72 I (mm): 35 Thickness (mm): 10

WellendichtringASLmit Staublippe, NBR 70 Shore, DIN3760BauformASL: Aussenmantel gummiertmit Staublippe Temperaturbeständig von -40 °C bis max. +100 °C Druckbereich bis max. 0,5 bar Umfangsgeschwindigkeit(m/s): ≤ 12Versteifungsring: unlegierter Stahl nach DIN EN 10139Zugfeder: unlegierter Federstahl nach DIN EN 10270-1Radial-Wellendichtring WDR in der ASL-Ausführungin Anlehnung an dieDIN3760 mit einem elastomeren Außenmantel und einem metallischen Versteifungsringsowie einer federunterstützten Dichtlippe und zusätzlich mit einer Staublippeausgestattet. Radial-Wellendichtringe sind im allgemeinen für dendrucklosen Betrieb ausgelegt. Werden zur Abdichtung von rotierenden Maschinenelementen, wie z. B. Wellen, Naben, Achsen,... verwendet

€8.49*

Wellendichtring Regelstange Steyr T80, T84, T86

#FA107217

Shaft seal control rod Steyr T80, T84, T86 Shaft seal control rod Steyr T80, T84, T86

for union nutitem no. 45

€4.99*

#FA63896

Frank Original Shard tip Shard tip

suitable for Landsberg-Pttinger, Einbck

€26.90*

#27077

Frank Original Shard tip Shard tip

Version: right can be used instead of Pöttinger: 1903682, 041662Z, 940.95.021.0

€49.90*

#FA63897

Frank Original Shard tip Shard tip

suitable for Landsberg-Pttinger, Einbck

€32.00*

#FA63898

Frank Original Shard tip Shard tip

suitable for Landsberg-Pttinger, Einbck

€32.00*

#FA55535

Share 105 mm Share 105 mm

Standard share suitable for harrow tines and cultivator tines.

€3.00*

#FA63889

Share 24x5x175 Share 24x5x175

to Vogel and Noot Garezinken

€2.99*

#FA70190

Share 50x265x6 mm Share 50x265x6 mm

2-hole

€12.50*

#FA58252

Share 52x7x300 Share 52x7x300

Suitable for cultivating harrow tine 70x12.

€12.90*

#58652

Share 6 mm Share 6 mm

Length (mm): 210

€2.99*

Variants from €1.99*

Scharblatt 380 mm, links, unterseitig aufgepanzert

#FA34399

Frank Original Share blade 380 mm, left, armored on the underside Share blade 380 mm, left, armored on the underside

suitable for Lemken series Smaragd

€49.90*

#FA34398

Frank Original Share blade 380 mm, right, armored on the underside Share blade 380 mm, right, armored on the underside

suitable for Lemken series Smaragd

€49.90*

#28055

Share curved Share curved

Size (mm): 35 x 5 x 135

€1.85*

Scharspitze S12P, unterseitig aufgepanzert

#FA34393

Share point S12P, armored on the underside Share point S12P, armored on the underside

suitable for Lemken series Smaragd

€32.90*

-20 %

#70194

share screw share screw

Ø x length (M): M12x60

with square approach

€0.95* €1.19* (20.17% saved)

Variants from €0.79*

#FA7987

Share screw M10x40 Share screw M10x40

From €0.31*

to the product

#FA58255

Share screw M10x60, 10.9 Share screw M10x60, 10.9

with square approach

From €1.10*

to the product

Scharschraube M8x35 zu Garezinken und Kultureggenzinken

#FA44566

Share screw M8x35 for cooking tines and cultivating harrow tines Share screw M8x35 for cooking tines and cultivating harrow tines

€0.70*

#8095

Share screw with 2 lugs DIN11014 Share screw with 2 lugs DIN11014

C (mm): 7 G (Divers): 3,6 mm M (mm): 10 S (mm): 19 Strength: 12.9 Ø D (mm): 24 Ø x length (M): M12x35

suitable for Heger, KMF, Landsberg, Pttinger, Vogel &~ Noot

€1.15*

Variants from €0.59*

Seite 146 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery